• Journal of Korean Academy of Rural Health Nursing
• /
• v.8 no.1
• /
• pp.25-32
• /
• 2013

Purpose: The purpose of this study was to investigate the changing process of work activities of community health practitioners in medically vulnerable areas. Methods: For the study an historical research method was used, based on literature data and collected literature data related to the work of community health practitioners from 1940 to 2013. Results: There were 45 records according to the literature data about the work activities of the practitioners. Analysis of the process of work activities by time period was based on the historical records: first, the introduction period (1940~1980) saw the "community health practitioners begin their work activities"; second, the development period (1981~1997) involved "provision of comprehensive health and medical service"; third, the stagnation period (1998~2005) characterized by "attempts at new role changes in a crisis"; fourth, the expansion period (2006~2011) "focused on the work of health promotion"; and finally, the stable period (2012~the present) observed "work activities of community health practitioners recognized." Conclusion: Results showed five topics in the process of work activities of community health practitioners by time period. The results offer basic data to investigate work activities of these practitioners and enable discussions about the future of community healthcare.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.237-242
• /
• 2005

The energy consumed by compressor in gas turbine is equivalent to $30\sim50\%$ of energy produced by turbine and, therefore, research on reducing compression work is important in increasing the efficiency of gas turbine. One of the method to reduce the compression work is to inject small water droplets into the compressor. This method decreases the compression work by decreasing the compressor exit temperature through the evaporation of water. Researches on wet compression, up to now, are focused on thermodynamic analysis of wet compression where the decrease of exit flow temperature and compression work is demonstrated. This paper presents an thermodynamic and aerodynamic analysis of wet compression in centrifugal compressor for microturbine.

• Journal of Korean Clinical Nursing Research
• /
• v.27 no.3
• /
• pp.279-293
• /
• 2021

Purpose: The purpose of this study was to develop a Korean nursing work environment scale for critical care nurses (KNWES-CCN) and verify its validity and reliability. Methods: A total of 46 preliminary items were selected using content validity analysis of experts on 64 candidate items derived through literature reviews and in-depth interviews with critical care nurses. 535 critical care nurses from 21 hospitals responded to the preliminary questionnaire from February to March 2021. The collected data were analysed using construct, convergent and discriminant validities, and internal consistency and test-retest reliability. Results: The 23 items in 4 factors accounted for 55.6% of the total variance were identified through item analysis and exploratory factor analysis (EFA). EFA was performed with maximum likelihood method including direct oblimin method. In the confirmatory factor analysis, KNWES-CCN consisted of 21 items in 4 factors by deleting the items that were not meet the condition that the factor loading over .50 or the squared multiple correlation over .30. This model was considered to be suitable because it satisfied the fit index and acceptable criteria of the model [𝒳²=440.47 (p<.001), CMIN/DF=2.41, GFI=.86, SRMR=.06, RMSEA=.07, TLI=.90, CFI=.91]. The item total correlation values ranged form .32 to .73 and its internal consistency was Cronbach's α=.92. The reliability of the test-retest correlation coefficient was .72 and the intra-class correlation coefficient was .83. Conclusion: The KNWES-CCN showed good validity and reliability. Therefore, it is expected that the use of this scale would measure and improve nursing work environment for critical care nurses in Korea.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.252-262
• /
• 1993

The subject on office automation is gradually gaining more improtance due to the fact that the efficiency of office systems contribute to the increase of productivity as much as manufactoring systems themselves. For successful implementation of office automation, one must carefully plan and execute various steps such as the analysis of office tasks, personnel training, workplace design, equipment design, and so on. The previous studies related to the subject has not been concrete enough to be practically helpful for the actual realization of office automation. In this paper, a new analysis method of the office task is proposed. This analysis method is based on the Rasmussen's and Bennette's methods. The Rasmussen's method describes a way of quantifying mental workload while the Bennette's method provides a tool for the analysis of the office task. The posner's and Rouse's methods are also employed for the detailed division of tasks. The method proposed in this paper is believed to be easier for use and expected to be more helpful for us to cope with the clear definition of office tasks that is vital to successful implementation of office automation.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.301-308
• /
• 2020

In this paper, we deal with the static modeling of a continuum robot that can perform surgical interventions. The proposed continuum robot is made of stainless steel wires and a multi lumen flexible tube using a thermoplastic elastomer. This continuum robot could be most severely deformed in physical contact with narrow external environments, when a lateral external force acts at the distal tip of the continuum robot. In order to predict the shape and displacement under the lateral external force loading, the forward kinematics, the statics modeling, the force-moment equilibrium equation, and the virtual work-energy method of the continuum robot are described. The deflection displacements were calculated using the virtual work-energy method, and the results were compared with the displacement obtained by the conventional cantilever beam theories. In conclusion, the proposed static modeling and the virtual work-energy method can be used in arrhythmia procedure simulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.153-159
• /
• 2019

Job creation is the most important issue in the labor market these days, and the quality of jobs is also very important in order to resolve the mismatches that are taking place in the labor market. Kim Young-min (2014) developed the "2012 Quality of Employment Index" with twenty indicators in seven categories, including employment opportunities, to objectively assess the local labor market. This method presents the concept of the aggregate indicator, 'Quality of Work Index', and has the advantage of being easy to produce. However, it is difficult to statistically verify the adequacy of the constitutive indicators and, based on this, make them a single aggregate index through statistical techniques. Therefore, we developed an alternative '2012 Descent Work Index' and a confidence interval using Principal Component Analysis(PCA) and Unobserved Component Model(UCM) presented by Gi-Choon Kang & Myung-jig Kim (2014) and also calculated an alternative '2017 Descent Work Index' using the first half of 2017 local area labour force survey and compared its changes by region. The results of the empirical analysis show that the rank correlation coefficient between two methods of aggregating indicators, simple weight used in Young-min Kim's research, PCA method and UCM used in this study, were found to be statistically significant under 5% significance level. This implies that all methods are found to be useful. However, the PCA and UCM which determine scientific and objective weights based on data are preferred to Young-min Kim's approach. Since it provides us not only the level of aggregate indicator but also its confidence intervals, it is possible to compare ranking with the consideration of statistical significance. Therefore, it is expected that the method of constructing an aggregating indicator using UCM will be widely used in many areas in the future.

• Journal of the Society of Disaster Information
• /
• v.12 no.1
• /
• pp.10-18
• /
• 2016

This study presented a new NOS model through the following suggestions to apply the construction work planing and management to NOS(Network Operating System). First, This study presented CIMS(construction information classification system) reflected the characteristics of facility classification - functional component classification - functional component classification - work classification - resource classification. Based on this system. this study presented how to establish PMMB(performance measurement management baseline) with proposed master target equation which analyzed the trend of performance measurement management baseline and proposed work target equation which analyzed the execution results. Finally, this study presented NOS model that can be applied to fixed price method and cost plus fee method through the theoretical verification of executive performance analysis method.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.2
• /
• pp.81-88
• /
• 2007

The objective of this study was to investigate the validity of the digital ergonomic simulation (DES) method as a prospective alternative to the ergonomic analyses conducted by experts. The DES method utilizes commercial digital manufacturing software, and can compute the RULA scores continuously throughout the simulated work cycle. It was shown in a case study that the accuracy and objectivity of the DES method are superior to those obtained by experts. Also, it was demonstrated that the DES method has a distinct capability to simulate and validate a proposed work plan. Major limitations of the current DES method lie in the extensive time and efforts required for accurate digital simulation, which may be overcome through an automatic module for RULA data acquisition and a motion capture system.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.987-1000
• /
• 2021

The concept of 'Employer branding' (EB) - one effective and sustainable strategy to attract and retain talent - has received a lot of attention from researchers and business managers. This concept becomes more meaningful when the 'war of talent' takes place in an extremely fierce manner in Vietnam as well as around the world. However, this concept is rather new; as a result, many points related to 'EB' scales should be improved, especially in Vietnamese context. Therefore, this study focuses on developing and confirming the EB scale in the context of Vietnam. Based on EB theory, this research applies the mixed research method: qualitative methods (expert interview and group discussion) and quantitative method (questionnaire survey of 937 respondents). EB is demonstrated to be a quadratic concept, consisting of the following 10 dimensions: Corporate social responsibility (CSR), Promotion (PRO), Work-Life Balance Satisfaction (WLSA), Education (EDU), Behavior-based Family interference with work (WLBE), Travel opportunities (TRA), Time-based work interference with family (WLTI), Teamwork (GRO), Supporting (SUP), and Strain-based family interference with work (WLST) with 58 observed variables. Based on the survey towards the employees in enterprises and organizations in Vietnam, the analysis results affirm that this scale ensures efficiency, reliability, unidirectionality and convergent values.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.91-97
• /
• 2001

When a body including a crack inside is subjected to the compressive forces, the crack is closed and sliding occurs on the crack surfaces. In this work, a subsurface crack subjected to a static compressive load is analyzed with the finite element method considering friction on the crack surface. The friction on the crack surface is assumed to follow the Coulomb friction law, and a numerical method based on the finite element method and iterative method is applied in this work. The result is compared with those of ANSYS and references.