• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.349-360
• /
• 2007

Recently, natural fiber reinforced composite is attracting attention and considered as an environmentally friendly material. Usually cellulosic fibers are used to reinforce the composites, but some protein fibers such as silk and wool serve the same purpose. In this paper, we proposed a method of producing artistic composite from artistic fabric by using silk fiber reinforced biodegradable plastic, which is designated as 'silk composite', for reinforcement. In order to expand applications of the silk composite, we performed the compression molding of decorative laminates with woody material, which was selected as a core material, and examined the properties of molded decorative laminates with various content of the silk composite. Since plywood and medium-density fiberboard (MDF) are widely used for decorative laminates, we selected them as core materials. As a result, flexible decorative laminates with high flexural strength were obtained by compounding the silk composite with wood materials.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.7 no.1
• /
• pp.65-72
• /
• 1989

Modified phenolics can have a retarding effect on the gelation of wood oil. Modified phenolic resins can be used in media for paint, varnishes, primers, overprinting varnishes, litho, letterpress and rotogravure inks. Varnishes based on rosin phenolic are faster drying, have better durability, are harder and glosser, and have greater resistance to water than ones based on ester gums. These physical properties is concerned with molecular weight distribution of rosin modified phenol resin. This paper was studied about molecular weight distribution of rosin phenolics which were prepared between $130~250^{\circ}C$. The results were as follows: 1) Average molecular weights inereased with increasing reaction temperature. 2) $M_w/M_n$ were from 3.43 to 46.44 with increasing reaction temperature and so the molecular weight distributions were changed from random distribution to broad distribution. 3) The relation ship between intrinsic viscosity and weight average molecular weight was follows: $[{\;}{\;}]={\;}1{\times}{\;}10^{-6}M_w,{\;}M_w=M_w$ 4) Esterification reaction between the acid group of rosin and polyol was started about $230^{\circ}C$$.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.216-221
• /
• 2010

Polyvinyl acetate (PVAc) prepared by emulsion polymerization has broad applications for additive such as paint binder, adhesive for wood and paper due to its low glass transition temperature which help to plasticize substrate resins. Since emulsion polymerization has a disadvantage that surfactant and ionic initiator degrade properties of the product polymer, poly (vinyl acetate-eo-ethyl acrylate) (VAc-EA) was synthesized using potassium persulfate as catalyst and polyvinylalcohol (PVA) as protective colloid to prevent the degradation. The copolymer latex product was internally plasticized and has enhanced adhesion, water resistance during VAc-EA emulsion polymerization. No coagulation and complete conversion occur with the reactant mixture of 10 mmol/L potassium persulfate, 10 mmol/L poly ( vinyl alcohol) (PVA 17). As the concentrations of PVA increase, the viscosity becomes increase.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.408-411
• /
• 2011

본 연구는 목조 문화재나 전통사찰 등에서 많이 적용되고 있는 단청처리된 목재에 대해 방염액을 사용하여 방염처리를 진행하였을 때 발생될 수 있는 백화현상를 단청목제가 적용 될 수 있는 외부환경과 일반적인 내부환경에 위치시켜 발생여부를 확인하여 보았다. 일반적으로 사용되어지는 6가지 종류의 단청색상에서 햇빛이나 눈비 등에 의한 영향, 습도 등에 따른 영향은 크지 않은 것으로 나타났으나 일부 단청 색상에서는 다소 습도가 높았던 실내 환경에서는 방염액이 많이 도포되어진 부분에서 백화현상이 일부 나타나는 것을 확인할 수 있었으며 단청의 색상을 구성하는 성분 차이에 의해 백화현상이 발생될 수 있음을 확인할 수 있었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.04a
• /
• pp.351-353
• /
• 2010

건축물에서 방화, 방음, 기밀, 단열 등의 용도로 사용되어지는 방화문은 외관의 단순함과 재질의 제한성 때문에 선택의 폭이 넓지 않았으나 최근에는 외관의 미려함을 고려하면서도 친환경성을 부여한 방화문들이 등장하고 있다. 하지만 방화문으로서 갖추고 있어야 하는 화재발생 시에 일정시간이내로 내화성을 부여해야 하는 측면에서는 어려움이 있다고 하겠는데 특히 목재방화문의 경우에는 경량화되면서도 내화성을 지닐 수 있는 방화문이 더더욱 요구되어지고 있기 때문에 목재방화문에 관한 내화특성을 실험을 통해 측정하였으며 화재안전성을 평가해 보았다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.3
• /
• pp.247-253
• /
• 2000

We evaluated the electric properties of Bi-2223 jointed tapes processed by both resistive-and superconducting-joint methods. For resistive-joint. filler materials of wood metal Pb/Sn. In and silver paste were used whereas for superconductive-joint lap joint method was used. In the resistive joint tape. critical transport property(CCR) n-value and contact resistance were observed to be in the range of 10-85% 1-8,9. and 0.71x10$\^$-6/-0.13x10$\^$-6/Ω, respectively. depending on their filler materials. Specifically it is believed that the electrical properties of resistive joint tape are significantly related to the resistivity of filler materials. On the other hand the CCR of superconductin joint type was varied 55 to 85% with uniaxial pressure probably due to the irregular microstructure in the transition region.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.24-32
• /
• 2018

Nanocellulose was surface-functionalized toward the applications in enhanced oil recovery (EOR) as a green alternative. The focus of this paper is on the effect of this material based nanofluid (NF) on foam lamella stabilization through studying its bubble breakup dynamics and flow behaviors in constricted mircofluidic devices. The NF stabilized foam produced an improved flow resistance across the capillary largely due to the capillary trapped bubbles at the contraction. The "snap-off" caused the NF stabilized foam to produce finer textured bubbles, which can migrate readily forward to the deep porous media, as revealed by the pressure profiles.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2672-2678
• /
• 2011

Carbody of rolling stock has been gradually changed as whole wood, steel frame with wood car body, whole steel car body with rivet and whole monocoque carbody with welding. And also mild steel has been used widely to material of structure, but usage of stainless and aluminium which have lightweight and high corrosion resistance is being increased lately. Structure is being commercialized to AED(All Extrusion Design),whole double skin with hollow excluded shape such as aluminium structure from SSD(Sheet Stringer Design), single skin consists of traditional frame and outside plat. Traditional aluminium carbody had many problems from reduced strength in welding combination section because car body is consist of small extruded material affected heat by welding. On this study, we proposed the plan to improve the body strength and quality with large-scale aluminium extruded material by minimizing welding concentration in combination section.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.469-474
• /
• 2010

Wood has an essential drawback such as high combustion ability. The purpose of this paper is to examine the combustion properties of the quercus variabilis and zelkova serrata dried at room temperature. The cone calorimeter (ISO 5660-1) was used to determine the heat release rate (HRR) and fire smoke index, as well as CO/$CO_2$ production and smoke obscuration. The total heat release (THR), $140.2\;MJ/m^2$ of the quercus variabilis under an external $50\;kW/m^2$ was high in comparison with THR $85.7\;MJ/m^2$ for the zelkova serrata. Furthermore, the quercus variabilis has high total smoke production (TSP), $3.50\;m^2$ compared with TSP $0.65\;m^2$ of zelkova serrata. Thease results depend on the bulk density of tested wood species. In addition, the CO/$CO_2$ production ratio of zelkova serrata and quercus variabilis was measured as 0.053, 0.043, respectively. Also, zelkova serrata showed an increase of fire-resistance attributed to char formation compared with that of quercus variabilis.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.121-129
• /
• 2008

Environmental friendly UV-curable coatings, having excellent hardness, gloss, mar and chemical resistance, are commonly used for the wooden flooring coatings. Especially epoxy acrylate oligomers are chosen for the wooden flooring coatings, due to their thermal stability and fast curing. In this study, we investigated the effect of the acrylate functionality on the thermal stability and surface hardness. The thermal degradations of monomers, oligomer, photoinitiator and formulated coatings with different acrylate functionality were measured using a thermogravimetric analysis (TGA). And the surface hardness was also measured with a pendulum hardness tester to compare relationship between the thermal stability and the physical property. The cured coatings became thermally stable by crosslinking during UV-curing. Both the thermal stability and surface hardness of cured coatings were improved with increasing acrylate functionality.