• Journal of the Korean Wood Science and Technology
• /
• 제42권6호
• /
• pp.682-690
• /
• 2014

본 연구에서는 WPC의 열안정성을 향상시키기 위해 폴리프로펠렌 매트릭스에 목분과 폴리인산염(ammonium polyphosphate, APP)의 삼종혼합 후, 목분과 난연제 첨가에 따른 목재플라스틱 복합재(wood plastic composites, WPC)의 열분해 거동이 조사되었다. 모든 배합비의 WPC 열분해 거동은 질소의 환경에서 분당 $10^{\circ}C$ 상승속도로 제어하여 열중량분석기(Thermogravimetric analyzer)를 통해 분석하였다. 목분의 열분해온도가 PP의 열분해온도 보다 낮기 때문에 목분에 의해 생성된 char막은 PP로의 열전달 속도를 낮추며, 2차 열분해온도 증가 및 열분해속도를 늦춘다. APP를 첨가한 WPC의 경우 1차 열분해온도 감소 및 2차 열분해온도의 증가를 보여준다. 목분의 함량이 높은 WPC의 경우, APP 첨가 시 1차 열분해온도 감소 및 2차 열분해속도가 증가하였고, 고온에서 잔여물의 양은 APP 함량이 증가할수록 크게 증가하였다. APP가 첨가된 WPC 경우, 목분의 함량이 10 wt%에서 50 wt%로 증가 시 고온에서 잔여물 양이 증가하였는데, 이는 APP 및 목질섬유의 char화가 동시에 발생되기 때문으로 보이며 결과적으로 목분 함량이 증가할수록 APP의 효과가 높게 나타나 열안정 효과를 관찰할 수 있었다.

• 한국환경복원기술학회지
• /
• 제12권4호
• /
• pp.72-80
• /
• 2009

The main purpose of this study is as follows : Finding a solution for fresh wood chips to be used as an alternative growing-media through a study of the formation method of a compost base that is applicable on both construction site and composting factory to ferment fresh wood chips produced from construction site as well as a study on adjuvant or secondary materials. The result from the experiment plot using wood chips sized 50mm or less, manure and fertilizer mixed manure as a source of nitrogen to compost fresh wood chips has shown that the temperatures 9days and 3days after the beginning of the experiment reached to $49.0^{\circ}C$ and $40.4^{\circ}C$ respectively, the heating duration was 7days and 4days respectively, and the C/N ratio was 26.5 and 25.3, each satisfying the standard for composted manure (25.0~40.0). Also, the other result from another experiment plot using mixture of sandy soil and microorganism as an inoculation source of microorganism has shown that the temperature 10days after the beginning of the experiment reached to $67.6^{\circ}C$ and lasted 16days. The experiment plot using sandy soil has shown the highest figure of $5.3{\sim}108$ CFU/g in terms of number of microorganism. The result from the experiment plots for on-site composting of fresh wood chips have shown that the experiment plot that used sandy soil with fertilizer due to supply restriction of manure as a nitrogen source in construction site reached the high temperature of $54.7^{\circ}C$ after 3days of experiment beginning and maintained heating state for 17days and reached 30.6 of C/N ratio, satisfying the standard for composted manure.

• Journal of the Korean Wood Science and Technology
• /
• 제22권2호
• /
• pp.37-45
• /
• 1994

The possibility of reusing the paper sludge as a raw material of composition board mixed with cement was investigated. For the measurement of physical and mechanical properties, wood coment board and sludge combinend cement boards were fabricated with the three weigh ratios of paper sludge 10 % (SI), 20 % (S II) and 30 % (S III) to cement weight. For adding the cement hardning, $CaCl_2$ was also added to each mixed paste with the ratio of 1 %, 3 % and 5 % to cement weight, respectively. Crystal formation in paper sludge-, wood-cement composites was observed by scanning electron microscope. The results were summarized as follows. 1. Density and partial compressive strength of each specimens were relatively high in the order of sludge I, sludge II, Korean pine, Italian poplar and sludge III, sludge I, Korean pine, sludge II, Italian poplar and sludge III. 2. The mechanical properties of sludge-cement boards (S I and II) were higher than that of wood-cement boards prepared with Korean pine and Italian poplar. But the mechanical properties of wood-cement boards were improved by the adding of $CaCl_2$. 3. Water absorption and thickness swelling were increased with increase of sludge content to cement weight. 4. In SEM observation, sludge-cement composites showed sufficiently formed crystals but wood-cement composites showed poorly formed crystals.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.267-267
• /
• 2019

Driftwood is one of serious problems in a river environment. In several countries, such as Indonesia, Japan, and Italy, the driftwood frequently appears in a river basin, and it can alter the channel bed, flow configuration by wood deposition and jam formation. Therefore, the studies related to driftwood have been actively conducted by many researchers to understand the mechanism of driftwood dynamics. In particular, wood motion by collision is one of the difficult issues in the numerical simulation because the calculation for wood collision requires significantly expensive calculation time due to small time step. Thus, this study conducted the numerical simulation in consideration of the wood motion by water flow and wood collision to understand the wood dynamics in terms of computation. We used the 2D (two-dimensional) depth-averaged velocity model, Nays2DH, which is a Eulerian model to calculate the water flow on the generalized coordinate. A Lagrangian type driftwood model, which expresses the driftwood as connected sphere shape particles, was employed to Nays2DH. In addition, the present study considered root wad effect by using larger diameter for a particle at a head of driftwood. An anisotropic bed friction was considered for the sliding motion dependent on stemwise, streamwise and motion directions. We particularly considered changeable draft at each particle and projection area by an angle between stemwise and flow directions to precisely reproduce the wood motions. The simulation results were compared with experimental results to verify the model. As a result, the simulation results showed good agreement with experimental results. Through this study, it would be expected that this model is a useful tool to predict the driftwood effect in the river flow.

• Journal of Plant Biology
• /
• 제35권3호
• /
• pp.211-217
• /
• 1992

본 연구는 중력자극에 대하여 식물체의 일기생장으로부터 이어지는 이기생장 중에 일어나는 생장 반응과 관련지어 유관속조직의 발생상의 변화를 규명하기 위하여, 은단풍 유식물의 제1절간이 수평 위치에서 생장하는 동안에 일어나는 반응조직의 발생과정을 연구하였다. 수평 위치에서 생장한 은단풍 유식물의 제1절간에서 장력재(교질섬유)의 발생과정은 점진적인 과정으로 나타났다. 수평으로 위치한 제1절간의 상부에서 장력재의 발생과정은 기부에서 정단부를 향해 구정적으로 일어났다. 장력재의 해부학적 특성 중 일부는 일기유관속에서도 나타나기 시작하여, 이기생장 전형적인 장력재가 나타나게 되므로 전형성층도 유관속형성층과 마찬가지로 중력에 대하여 반응하는 것으로 볼 수 있다. 이런점으로 보아 전형성층은 유곤속형성층과 동일 분열조직으로 보아야 할 것이다. 도관요소의 길이는 상부에서 길게 나타났고, 도관의 측면무늬에 있어서는 상부와 하부에서 모두 상생으로 차이가 없었다. 방사조직의 폭은 이열방사조직을 이루는 상부가 단열방사조직을 이루는 하부에 비하여 넓고, 높이도 상부에서 다소 높게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.1-7
• /
• 2005

춘천지역에서 생장하는 주요 침엽수 2수종(소나무, 잣나무)과 활엽수 2수종(신갈나무, 아까시나무)의 생장특성을 규명하기 위하여 연륜형성 과정에서 수지구, 타일로시스 및 만재부 형성시기를 조사하였다. 소나무와 잣나무의 수직수지구는 각각 7월 초 중순경과 5월 초순경에 형성되어 잣나무 수직수지구의 출현이 소나무보다 상당히 빠른 것을 보여주었다. 신갈나무의 도관내 타일로시스는 5월 중순경에, 아까시나무는 5월 하순경에 형성되는 것으로 관찰되었다. 소나무의 만재부 형성기는 8월 중순경, 잣나무는 9월 하순에서 10월 초순경으로 관찰되었다. 신갈나무는 5월 하순경에, 아까시나무는 6월 초 중순경에 조재부 도관의 형성이 완료됨과 동시에 만재부의 도관과 다른 세포들이 형성되기 시작하였다. 따라서 동일 환경조건에서 생장하였더라도 수종에 따라 수지구, 타일로시스 및 만재부 형성 시기는 다르게 나타나는 것이 확되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.221-224
• /
• 2008

We made densified wood pellet by hemp woody core as replacing wood resource. Hemp was separated into the bast fiber and the woody core by hot steaming treatment. The hemp woody core had a similar lignin content and carbohydrate composition with hardwood. Also, the hemp had a low ash content, which resulted in a low ash formation in pellet burning. Heating value of the hemp pellet had a very similar to the pellet made by hardwoods. The hemp woody core can replace hardwood for densified wood pelletmaking.

• 한국균학회지
• /
• 제34권1호
• /
• pp.22-28
• /
• 2006

목초액, 잣나무추출물, 후추열매추출물 및 살균제를 이용해서 표고 골목에 발생하는 주홍꼬리버섯을 방제하고자 하였다. 식물추출물 선발시험결과, 목초액 35,000 ppm에서 균사생장이 완전히 억제되었고 25,000 ppm에서 자낭포자의 발아가 관찰되지 않았다. 그리고 잣나무추출물 200 ppm과 후추열매추출물 1,000 ppm에서 각각 98.9%와 95.9%의 자낭포자발아억제율을 보였다. 살균제 선발시험 결과, benomyl, carbendazim, thiabendazole 등의 최소억제농도(MIC)는 $0{\sim}0.4\;{\mu}g\;a.i./m{\ell}$였다. Difenoconazole은 $0.08%\;{\mu}g/m{\ell}$ 농도에서 자낭포자 발아를 98.9% 억제했다. 살균제에 의한 표고균사생장억제율 조사 결과, 저온성, 중온성, 고온성균주 간에 차이가 거의 없는 것으로 나타났다. Benomyl, carbendazim, thiabendazole, thiophanate-methyl 등은 높은 농도에서도 비교적 낮은 억제율을 보였으나, tebuconazole은 $0.4\;{\mu}g\;a.i./m{\ell}$ 농도에서도 80% 이상의 억제율을 보여 표고균에 좋지 않은 영향을 미치는 것으로 나타났다. 목초액 및 식물추출물과 살균제를 골목에 살포한 결과 목초액 150,000 ppm이 주흥꼬리버섯의 포자퇴형성 전 처리에서 72.7%의 방제가를 보였고 포자퇴형성 후 처리에서 목초액 70,000 ppm과 thiophanate-methyl 1,000 ppm이 각각 58.1%와 52.3%의 방제가를 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.39-50
• /
• 1993

The purpose of this study was to describe the micromorphological changes in Korean red pine (Pinus densiflora S. et Z.) wood decayed by a major brown-rot fungus, Lentinus lepideus, using scanning electron microscope and transmission electron microscope. At the end of the 12-week exposure to the fungus in soil block procedure(ASTM 1971), test blocks sustained 5.02% weight loss. The formation of bore hole by hyphae and penetration of hyphae through bordered pit were not observed. Instead, fungal hyphae appeared to penetrate axially tracheid luminar from the the ray cells via cross field pits. Hyphae were mainly found in lignin rich cell corner regions of tracheids, and also extensive degradation of tracheid wall occurred in this region. Extensive degradation of $S_2$ layer occurred without noticeable alteration of the $S_3$ layer, but warty layer and compound middle lamella remained relatively intact. Localized erosion, the characteristic of white rot, was observed in some cell wall and wall components including lignin were found to be decomposed.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.67-78
• /
• 2006

Modification of polylactic acid (PLA) and 10% maleic anhydride (MAH) with 15% dicumyl peroxide (DCP) based on MAH weight was conducted in the kneader at $160^{\circ}C$ and 30~70 rpm, for 15 min. The resulting MAH-modified PLA (PLA-MA) was then evaluated as a compatibilizer for PLA-wood flour (WF) composites. The FTIR and $^1H$-NMR analysis gave evidence of PLA-MA formation. After kneading and reacting with MAH and DCP, the number (Mn) and the weight average (Mw) molecular weights of PLA decreased as compared to the original PLA. The presence of WF in the composites decreased the tensile strength and several other physical properties. The higher the WF loading resulted in the greater the reduction of tensile strength. An addition of 10% PLA-MA as a compatibilizer to the composites improved the tensile strength and several other physical properties, increased the flow temperature, and decreased the melt viscosity. The improved composite revealed 1.42 times increased in tensile strength but not over PLA alone, and absorbed considerably less water compared to those of the composites free-compatibilizer.