• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.68-75
• /
• 2006

Electromagnetic shielding sheet using the carbon and wood fiber mixture was manufactured in an effort to develop an electromagnetic shielding packaging material. Carbon fibers were cut into 5, 10, and 15 mm using the automatic cutting device and blown and dispersed using compression air passed through the fine nozzle. Then carbon fibers were slurried with water (0.1% consistency), and softwood kraft pulp along with cone starch were added. The wet mats were manufactured by dewatering in modified hand-sheet machine. The wet mats were pressed upto $4kgf/cm^2$ in the carbon and wood fiber mixture mat press. The wet mats were dried in the automatic controlled plate dryer. Investigation on the formation and surface structure of the newly developed carbon and wood fiber mixture electromagnetic shielding sheet were carried out using the scanning electron microscopy and the image analyzer. Finally electromagnetic shielding characteristics of the newly developed carbon and wood mixture sheet were measured using net-work analyser. The result was promising in the light of the fact that this method could open a new way to substitute the expensive imported electromagnetic shielding sheet.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.61-69
• /
• 1988

Recently the automization of wood manufacturing and the development of CNC machine tools becomes the center of interest. Cutting mechanism, tool wear and the roughness of machined surface have been studied. In the studies about wood for special uses, concrete data of cutting is desired. While Pinus densiflora is characterized that heartwood develops as age increases, Chunyang District has the characteristic of strength, red color, relatively regular chap and high heartwood - percentage. But there is no data about cutting this wood, Chunyang District. In this study face milling by sintered carbide tool was excuted to Chunyang District. Cutting force, Surface roughness and states were investigated with regard to cutting speed. Example results were as follows; 1) Mean cutting resistance against lateral component force and longitudinal component force decreased rapidly up to cutting speed of 155 m/min, and remains constant above this speed. 2) The surface roughness of cutting surface lowered as cutting speed increased, regardless of fiber formation. Radial rougness of fiber is larger than lineal surface roughness. 3) Increase in Cutting speed made machining mark restrained. Down-milling showed larger marks than up-milling.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.2
• /
• pp.169-180
• /
• 2021

Inherent crystalline domains present in low formaldehyde to urea (F/U) molar ratio urea-formaldehyde (UF) resins are responsible for their poor adhesion in wood-based composite panels. To modify the crystallinity of low molar ratio (LMR) UF resins, this study investigates the additional effect of cellulose nanomaterials (CNMs), such as cellulose microfibrils (CMFs), cellulose nanofibrils (CNFs), and TEMPO-oxidized CNFs (TEMPO-CNFs) on the crystallinity of modified LMR UF resins. First, two modification methods (post-mixing and in situ) were compared for modified LMR UF resins with TEMPO-CNFs. The modified UF resins with TEMPO-CNFs decreased the nonvolatile solid contents, while increasing the viscosity and gel time. However, the in situ modification of UF resins with TEMPO-CNFs showed lower crystallinity than that of post-mixing. Then, the in situ method was compared for all CNMs to modify LMR UF resins. The modified UF resins with CMFs using the in situ method increased nonvolatile solid contents and viscosity but decreased the gel time. The crystallinity of UF resins modified with TEMPO-CNFs was the lowest even though the crystalline domains were not significantly changed for all modified UF resins. These results suggest that these CNMs should be modified to prevent the formation of crystalline domains in LMR UF resins.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1819-1825
• /
• 2008

Degradation and glucose production from wood chips of white pine (Pinus strobus) and tulip tree (Liriodendron tulipifera) by several white rot fungi were investigated. The highest weight losses from 4 g of wood chips of P. strobus and L. tulipifera by the fungal degradation on yeast extract-malt extract-glucose agar medium were 38% of Irpex lacteus and 93.7% of Trametes versicolor MrP 1 after 90 days, respectively. When 4 g of wood chips of P. strobus and L. tulipifera biodegraded for 30 days were treated with cellulase, glucose was recovered at the highest values of 106 mg/g degraded wood by I. lacteus and 450 mg/g degraded wood by T. versicolor. The weight loss of 10 g of wood chip of L. tulipifera by T. versicolor on the nutrient non-added agar under the nonsterile conditions was 35% during 7 weeks of incubation, and the cumulative amount of glucose produced during this period was 239 mg without cellulase treatment. The activities of ligninolytic enzymes (lignin peroxidase, manganese peroxidase, and laccase) of fungi tested did not show a high correlation with degradation of the wood chips and subsequent glucose formation. These results suggest that the selection of proper wood species and fungal strain and optimization of glucose recovery are all necessary for the fungal pretreatment of woody biomass as a carbon substrate.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.111-113
• /
• 2009

Ramaria botrytis is one of the commercially important ectomycorrhizal mushrooms in Korea and the mushroom is only picked in natural forest. This study was conducted to make ectomycorrhizal synthesis of the fungus using Pinus densiflora seedling. Ectomycorrhizal types of the fungus were simple and dichotomous. Diameter of ectomycorrhizal root was $325-380{\mu}m$ and fungal mantle was subhyaline with $20-30{\mu}m$ in diameter. On the other hand, optimum temperature for mycelial growth was $25^{\circ}C$ and the fungus grew 5 cm on potato dextrose agar medium in two months.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.147-153
• /
• 2000

Experiments were carried out to determine the effects of culturing conditions DCI(Day required for Colonization after Inoculation), CR(Contamination Rate), MD(Mycelial Density), DPI(Day required for Primordial sclerotia formation after Inoculation), yields, and degree of the foreign materials formations in Poria cocos sclerotia. The upper and bottom side of wood logs were covered with gauze, rice hull and floating leaves, vinyl, or covering cloth in order to prevent foreign material formations in p. cocos. The major results were positive in the order of rice hull, floating leaf, vinyl, gauze, and covering cloth covered and dwindled. In case of the upper and bottom sides of the wood logs covered with rice hull, DCI required 50 days more when compared with the control group(45 days) and CR was 0%, while the control group showed 2% CR. MD was excellent in case of conventional methods as against control's. DPI required 17~20 days less when compared with the control group(82 days). Yields of p. cocos in case of the upper and bottom side of wood logs covered with rice hull were 5.87kg, which is 35.7% higher than that of the control group(4.33kg), and 5.62kg in the case of upper sides cover only(increased by 29.8% compared with control), and 5.59kg in the case of bottom side cover only(increased by 29.1% compared with control), and foreign materials were none. In a separate experiment, where the upper and bottom sides of wood logs were covered with rice hull to prevent the foreign material formation, the results were as follows : Sclerotia formation status and quality of P. cocos were effective in the order of 20cm, 40cm, and 60cm of buring depth and dwindled. In 20cm of burying depth, DCI was shortened by 5 days and CR was none, while the control group showed 2% CR. MD was remarkably fine at the mulched conditions. DPI was shortened by 20 days when compared with the control(62 days).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.38-46
• /
• 2006

This study was carried out to investigate the sheet properties of Morus Hanji, made by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping, and different stocks composed to bast and whole stalk fibers. Two species of Morus, M. alba and M. lhou, were used. Pulp yield of the whole stalk parts, its brightness and opacity were higher than those of bast part. In particular sulfomethylated pulp has higher brightness of $62{\sim}63%$, than other pulps(average brightness $30{\sim}40%$). In mechanical properties, paper made of bast fiber has higher strength than those of the whole stalks. Hanji made from M. lhou, whole stalk, and sulfomethylated pulp gave better sheet formation and higher strength than those of the others. Hanji from M. alba bast fiber and whole stalk pulps were not so good sheet properties.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.251-256
• /
• 2006

The purpose of this study was to confirm multiple retention system of C-PAM, A-PAM and Inorganic micro particles vs. traditional micro particle system and dual polymer system by measuring retention, drainage and formation using RDA HSF and Techpap 2D -F Sensor The benefits of dual polymer system were easy to use, low chemical consumption and good retention property but defect was worse drainage property than inorganic microparticle systems. On the other hand, Inorganic microparticle system had benefit of good drainage effect but defects were difficult to use, high chemical consumption. Therefore, we tried to find optimal morphology of polyacrylamide and applied to multiple retention system of C-PAM, A-PAM and inorganic microparticles to compensate defects of both of retention systems. As a result, we found the performance of branched C-PAM, branched A-PAM and inorganic micro particle triple system was more appropriate than traditional inorganic mircoparticle systems or dual polymer systems by comparing retention, drainage and formation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.30-35
• /
• 2008

Mechanical properties of paper mulberry bast fiber handsheets were investigated to study the characteristics of bast fiber in terms of being suitable for modern paper making process. Tensile, tear and burst strength of handsheets made from bast fiber of paper mulberry were better than those of NBKP handsheets. Smoothness of bast fiber was higher but stiffness was lower than NBKP. Sizing performance of bast fiber were worse. 3D image analysis showed that handsheets of bast fiber had inferior formation and more pores comparing to NBKP.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.27-33
• /
• 2011

Hemp bast pulp cooked at temperature below $100^{\circ}C$ followed by defibration by the knife and the valley beater, respectively was mixed with softwood pulp varying the amount of hemp pulp in order to find the optimum condition for making hemp-wood paper. Both the knife and the valley beaters contributed to the dispersion of pulp fiber well. Lots of shives were found when the knife beater was applied exclusively, but the fibers were dispersed well when freeness dropped to 600 mL CSF and 500 mL CSF by the valley beater. Air resistance decreased drastically below 500 mL CSF where rapid disrupture of pulp fiber occurred. As the values for freeness and hemp fiber content increased, so did roughness and bulk. It was apparent that the tear strength of hemp-wood paper was on the rise drastically as hemp fiber content increased. Nevertheless the optimum hemp fiber content of hemp-wood paper would be 20% considering the decrease in both tensile and burst strengths as well as sheet formation.