• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.15-20
• /
• 1993

X-ray diffractograms of the vessel elements and the wood fibers of Quercus variabilis BLUME were recorded and resolved into characteristic reflections of cellulose I. Some differences were observed in the ratio of integrated intensity and crystallinity index between vessel elements and wood fibers. Present results suggest that cellulose crystal structure in the hardwood species was varied with the elements of wood.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.38-44
• /
• 1998

A new device that uses turbulent air for mixing wood fibers with thermoplastic fibers was designed and its mixing effectiveness was evaluated in wood fiber and polypropylene fiber composites. Composites made by the turbulent air mixing (TAM) process performed better than composites made by the conventional Rando-Webber forming or nonwoven web process with an additional needling step. Thus, the TAM process proved to be a simple and efficient method in mixing wood fibers with short thermoplastic fibers for the production of wood fiber and thermoplastic fiber composites.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.154-163
• /
• 2015

Because of acute or chronic intoxication by carbon disulfide, viscose rayon industry is strictly subjected to environment regulatory approval. Recently, non-wood fibers are frequently considered as a raw materials for the manufacture of specialty paper for the higher physical strength and functionality. Among the non-wood fibers, hemp bast fiber is one of the most widely used materials in viscose rayon yarn industries. In this study, the handsheet for manufacturing the viscose rayon yarn was prepared with wood pulp fibers and hemp bast fibers. The proper mixing ratio of wood fibers and hemp bast fibers with dry-strength agent and nano-celluloses was analysed in terms of physical and mechanical strength of sheet for viscose rayon yarn. The papermaking conditions for high mechanical strength of sheet were obtained by mixing the SwBKP and HwBKP fibers with freeness level of 200 mL CSF. The dual polymer system by controlling the addition ratio of PVAm and anionic PAM was also important. The addition of nano-cellulose into wet-end furnishes increased the physical strength of sheet, and improved the paper structure for the production of viscose rayon yarn.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.16-22
• /
• 2007

The behavior of ramie fibers and some wood elements in the early stage of alkali swelling was examined. When the fibers were treated with alkali solution, they significantly shrank in length and swelled in wall thickness. Ramie fibers showed a shrinkage averaging 23% in length and a swelling averaging 92% in width in 100 seconds treating time. Dimensional changes showed different fashion in each element of woods. The tracheids of latewood especially in Pinus densiflora and Larix kaempferi woods swelled intensively and showed balloon swelling, but in the case of Cryptomeria japonica, it was hardly observed. The swelling morphology of libriform fibers was similar to that of tracheids. The walls of vessel elements and parenchyma cells also swelled considerably in thickness but, no balloon swelling was found in both elements. The differences of swelling in different elements can be interpreted in terms of the differences of organization and/or chemical components of the cell walls.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.43-49
• /
• 2006

The surface and pore structure of cellulose fibers have a significant impact on the properties and performance in applications. Cellulase enzymatic hydrolysis of cellulose fibers can result in changes to the surface and pore structure thus providing a useful tool for fiber modification. This research characterizes these changes using various test methods such as fiber dimension, water retention value, hard-to-remove water content, freezing and non-freezing bound water content, polymer adsorption, and crystallinity index. For a high-dosage enzyme treatment (0.10 g/g), the fiber length was significantly decreased and the fibers were 'cut' in the cross direction, not in the axial direction. The swelling capacities as measured by the WRV and HR water content increased for the high-dosage treatment. Three independent measurements (non-freezing bound water, polymer adsorption, and crystallinity index) are in good agreement with the statement that the amorphous regions of cellulose fibers are a more readily available substrate relative to crystalline regions. Based on the experimental results obtained herein, a model was proposed to explain surface and pore structure modification of cellulose fibers via enzymatic treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.27-35
• /
• 2001

Four different sources of wood-fibers from Eucalyptus, Italian poplar, hemlock, and mixed species fibers were used to study the influence of their fiber characteristics on the performance of medium density fiberboard (MDF) panels bonded with both urea-formaldehyde (UF) and phenol-formaldehyde (PF) adhesives. Included fiber characteristics were fiber length, size distribution, bulk density, and acidity. Physical and mechanical properties of MDF panels manufactured by dry process using these different fibers were determined for the comparison of board performance. Two hardwood species had a large fraction of short fibers resulting in a higher bulk density while very long hemlock fibers had lower bulk density. Fiber acidity was revealed to strongly affect the internal bond (IB) strength of MDF panels bonded with UF resins. MDF panels made from mixed species fibers showed highest IB strength of all panels prepared. UF-bonded MDF panels showed poor dimensional stability. In conclusion, the present study showed that wood-fiber characteristics such as fiber length, bulk density, and acidity affect the performance of MDF boards, and also suggested that fiber characteristics be considered for MDF panel manufacture.

• 펄프종이기술
• /
• 제41권2호
• /
• pp.47-54
• /
• 2009

Anatomical characteristics of kenaf were investigated in transverse, radial and tangential direction by optical and scanning electron micrograph. Kenaf was made up of bast fibers, wood fibers, vessels and parenchyma cells. Bast fibers were long slender cells with different types of pits. The shape of wood fibers were in various ways and pointed at the ends. The pits were observed on the surface of bast fibers. Kenafs were diffuse and radial porous. and composed of solitary pores and two or three radial pore multiples. Various types of vessels were observed. The pits showed alternate pitting and larger diameter than other cells. Parenchyma cells were rectangular or square with different shapes of pith parenchyma cells compared to conventional types of parenchyma cells in wood. The number of pith on the surfaces were small.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.490-497
• /
• 2010

국내산 밤나무 목재의 효율적 이용을 위한 기초 자료를 얻기 위하여 밤나무 7품종(단택, 이취, 이평, 만성, 은기, 유마, 축파)의 목섬유 및 도관요소 길이를 대상으로 방사방향 변이성을 조사하였다. 목섬유 및 도관요소 길이는 조재와 만재 부위를 구별하여 3연륜 간격으로 광학현미경과 화상분석기를 사용하여 측정하였다. 밤나무 수간에 있어 만재 목섬유의 길이가 조재의 것보다 다소 더 길었으며, 조재 및 만재 모두에 있어 연륜 증가에 따라 목섬유 길이가 증가하는 경향이 나타났다. 이와 유사하게, 만재 도관요소의 길이 역시 조재의 것보다 다소 더 길었으며, 조재 및 만재 모두에 있어 연륜 증가에 따라 도관요소의 길이가 완만하게 증가하는 경향을 보였다. 결론적으로 밤나무 수간에 있어서의 목섬유 및 도관요소의 길이는 성숙재와 미성숙재를 판단하는 재질 지표로 이용될 수 있을 것으로 생각된다

• 임산에너지
• /
• 제20권1호
• /
• pp.6-11
• /
• 2001

한지의 원료가 되는 닥섬유의 펄프화를 위해 인피부에 목질 분해균을 처리하여 인피섬유의 단섬유화를 위한 미생물의 분해특성과 처리시간별 인피섬유의 분리에 대하여 검토하였다. 판막버섯이나 구름버섯으로 20일간 처리시 중량감소율이 약 50%에 이르러 오히려 이용 가능한 섬유소의 분해도 함께 초래하는 것으로 추정할 수 있다. 그러나 꽃구름버섯이나 벽돌빛뿌리 버섯은 인피섬유의 제일 외피에 존재하는 흑청색 부분을 잘 본해시키고 섬유소 손상을 적게하는 특성을 가진 것으로 나타났다. 꽃구름버섯은 처리 10일째가지 78.9%의 셀룰로오스 함량을 유지하고, 리그닌은 7.2%를 나타내어 제일 양호한 분해 양상을 보였다. 현미경적 관찰의 결과에서는 느타리버섯의 경우 처리 30일부터 인피부의 섬유가 분리되어 단섬유화 되며, 50일간 장기간 처리하여도 섬유표면의 손상은 발견되지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.510-515
• /
• 2014

The anatomical and physical properties of tension wood (TW), opposite wood (OW) and lateral wood (LW) in the branches of Korean paulownia (Paulownia coreana) were compared. The diameter of TW vessels was larger than that of OW and LW vessels. The most distinctive feature of TW fibers was the presence of a gelatinous layer (G-fiber). The cell wall of TW fibers was nearly three times as thick as that of OW and LW. TW differed from OW and LW in density, X-ray diffraction pattern and shear and compressive strengths. The results obtained in this study showed clear differences in the anatomical and physical properties of TW, OW and LW of Paulownia coreana branch woods.