• Title/Summary/Keyword: wood column

Search Result 186, Processing Time 0.025 seconds

Shear Performance of Post and Beam Construction by Pre-Cut Process (프리컷 방식을 적용한 기둥-보 공법의 수평전단내력)

  • Hwang, Kweonhwan;Park, Joo-Saeng;Park, Moon-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.6
    • /
    • pp.1-12
    • /
    • 2007
  • For the purpose of effective utilization of domestic second-grown larch as structural members, post and beam construction applying traditional construction to Japanese larch glulam members was adopted with processing by machine pre-cut method. In general, horizontal shear test by KS F 2154 is conducted to assess the horizontal shear properties of the wooden structure by post and beam construction. The frame was consisted of post and beam member with appropriate fasteners, and members have their own processed parts (notch, hole, etc.) that can be well-connected each other. The shear wall was consisted of the frame with screw-nail sheathed panel (OSB). The results of horizontal shear loading tests without vertical loads conducted on the frame and the shear wall structures, the maximum strengths were about 1.9 kN/m and about 9.7 kN/m, the shear rigidities were about 167 kN/rad, 8198 kN/rad, respectively. The strength proportion of the frame specimen was about 20% of the wall's and about 2% in initial stiffness. Nail failures are remarkable on the shear wall specimen with punching shears and shear failures. The shear load factor for the shear wall specimen by the method of Architectural Institute of Japan was 1.5, which was obtained by the bi-linear method. Loading method should be considered to obtain smooth load-deformation relationship. For the better shear performance of the structures, column base and post and beam connections and sheathed panel should be further examined as well.

Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy - (산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)-)

  • Lee, Sung-Yoon
    • Journal of the Korean Wood Science and Technology
    • /
    • v.2 no.4
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

A Study on the Ancient Architecture in view of the Stone Remains (focused on the 3 Kingdom Period and Unificated Shilla Period) (석조유구(石造遺構)를 통한 한국(韓國) 고대건축(古代建築)에 관한 연구(硏究) -삼국시대와 통일신라시대를 중심으로-)

  • Cheon, Deuk-Youm;Park, Ji-Min
    • Journal of architectural history
    • /
    • v.8 no.3 s.20
    • /
    • pp.23-38
    • /
    • 1999
  • The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

  • PDF

A Study on Analysis Modeling of Column Bracket Set in Traditional Wood Structures (전통 목구조 주심포의 해석 모델링에 관한 연구)

  • Park, Kyoung-Hoon;Choi, Hyun-Hoon;Kim, Jin-Koo
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 2009.04a
    • /
    • pp.275-278
    • /
    • 2009
  • 전통 목구조 건축물은 크고 작은 부재가 많이 결구되어 있기 때문에 구조해석을 위한 모델링에 어려움이 있다. 기존에 제안된 모델링 기법은 모델링과 해석에 많은 시간이 필요하기 때문에 이를 개선할 수 있는 효율적인 방법이 필요하다. 본 연구에서는 전통 목구조 건축물 중 가장 많은 부재로 구성된 공포의 거동을 구현할 수 있으며 모델링과 해석에 소용되는 시간을 줄일 수 있는 모델링 기법을 제안하였다. 제안된 모델의 적합성을 확인하기 위하여 다양한 하중 재하 형태에 대한 유한요소 모델의 응답과 비교하였다. 해석결과에 따르면 제안된 모델의 응답은 유한요소해석결과와 10% 이내의 오차범위 안에 있어 공포의 해석시 보다 간편하게 활용할 수 있을 것이다.

  • PDF

Lignans from fruits of Schizandra chinensis

  • Lee, Hak-Ju;Seo, Sun-Mi;Lee, Myung-Koo;Choi, Don-Ha;Paik, Ki-Hyon
    • Proceedings of the PSK Conference
    • /
    • 2003.04a
    • /
    • pp.257.2-258
    • /
    • 2003
  • Schizandra chinensis known as OMIJA belongs to Schizandraceae family, and is being used in the formulation of traditional medicine. Various column chromatographies with various solvent systems were used to isolate its compounds. To identify compounds isolated, instrumental analysis methods such as NMR and MS were employed. (omitted)

  • PDF

Antioxidant Effect of Juglans mandshurica Bark Gallotannins

  • Si, Chuan-Ling;Bae, Young-Soo
    • Journal of Forest and Environmental Science
    • /
    • v.23 no.1
    • /
    • pp.1-4
    • /
    • 2007
  • The bark of Juglans mandshurica Maxim. was collected, extracted with acetone-$H_2O$ (7:3, v/v), fractioned with n-hexane, $CH_2Cl_2$ and EtOAc, then each fraction was freeze-dried to give some powders. A portion of the EtOAc (28.4 g) fraction was chromatographed on a Sephadex LH-20 column eluting with a series of MeOH-$H_2O$ and EtOH-hexane mixture. Four gallotannins, gallic acid (1), ellagic acid (2), 1,2,4,6-tetra-O-galloyl-${\beta}$-D-glucose (3) and 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-glucose (4), have been isolated from the EtOAc fraction Their structures were elucidated on the basis of chemical evidence and spectrometric analysis such as NMR and MS. The antioxidant activities on each fraction and the isolated gallotannins were evaluated by DPPH radical scavenging test.

  • PDF

Characteristics of the Amylase and its Related Enzymes Produced by Ectomycorrhizal Fungus Tricholoma matsutake

  • Hur, Tae-Chul;Ka, Kang-Hyun;Joo, Sung-Hyun;Terashita, Takao
    • Mycobiology
    • /
    • v.29 no.4
    • /
    • pp.183-189
    • /
    • 2001
  • Extracellular amylase properties were examined with the mycelium of Tricholoma matsutake isolated from ectomycorrhizal roots of Pinus densiflora. The molecular weights of $\alpha$-amylase and glucoamylase were estimated as 34.2 kD and 11.5 kD, respectively, after eluted through Superdex 75 column. The optimum pH of the purified enzyme was found in a range of pH $5.0{\sim}6.0$, with a peak at pH 5.0. The activities of these enzymes were stable from $4^{\circ}C\;to\;30^{\circ}C$. The $\alpha$-amylase of T. matsutake readily hydrolyzed soluble starch and amylose-B, while it weakly hydrolyzed glycogen, dextrin, amylose and amylose-A. The main products of hydrolysis were confirmed to be glucose, maltose and maltotriose on the basis of the similarities in the thin layer chromatographic mobility.

  • PDF

A Study on the Method of Science Laboratory Waste Water by Absorbent at the Secondary School (학교 실험 폐수 처리 방안)

  • 장원일
    • Hwankyungkyoyuk
    • /
    • v.2 no.1
    • /
    • pp.92-99
    • /
    • 1991
  • According to our secondary school curriculum for natural science and technical circles, there be used 353 of chemical reagents including 24 kinds of harmful and toxicant components. At present, most school are discharging their school laboratory waste water without any chemical and physical treatments. So as to solve the environmental problem for water pollution, this study tried to research a kind of adsorbant utilizing saw dust, wasted wood sources and designed the simple processing system using the adsorbent. This adsorbent was made by extracting lignin substances from raw saw dust under the solution of 0.5N-NaOH at the temperature of $100^{\circ}C$. Their metal removed rates was measured not only by processing of column and vessel. but also by comparing the standard solution and real waste water. The results were proved as more than 90(%) of the adsorptive efficiency on the average from Pb, Cd, Cu except Cr(VI)in case of the school experimental waste water soaked in vessels a long with 4g of the adsorbent for 24 hours. The new processing system enables to remove most harmful and toxicant metals by filtering, sedimenting and adsorbing at the low cost.

  • PDF

Effects of Some Carbohydrates and Ammonium Sulfate on Lignin Degradation by Pseudomonas diminuta (탄수화물과 황산암모늄이 Pseudomonas diminuta의 리그닌 분해에 미치는 영향)

  • 김규중;신광수;맹진수;성치남
    • Korean Journal of Microbiology
    • /
    • v.26 no.2
    • /
    • pp.129-136
    • /
    • 1988
  • To investigate the influence of cosubstrate supplement and ammonium sulfate on lignin degradation by Pseudomonas diminuta KM-4-2, isolated in the laboratory, the strain was cultured on the lignin media which contained lignin as a source of carbon and the culture filtrate was analyzed by Sephadex G-75 column chromatography. It was found that polymerization was not appeared unlike wood-rot fungi. When the carbohydrates were added, the peak of lignin at 280nm by UV scanning spectra of the filtrate, was significantly increased. In order to determine the effect of ammonium sulfate on the ligninolytic activity, the isolated strain was incubated in the media containing 0.1%, 0.25% and 0.5% of nitrogen concentration in the Warburg flask and the rate of oxygen uptake was esitmated by Warbuge Respirometer. As a result, the activity was maximum at 0.1% of nitrogen concentration and thereafter decreased in parallel with nitrogen concentration.

  • PDF

Chemical Constituents of Domestic Quercus spp. Leaves (국내산 참나무속 수종 잎의 추출성분)

  • Kim, Jin-Kyu;Bae, Young-Soo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.34 no.6
    • /
    • pp.61-71
    • /
    • 2006
  • This study was carried out to investigate chemotaxonomical correlation an d the chemical constituents of domestic Quercus sp. leaves. The leaves of Q. mongolica, Q. aliena, Q. serrata, Q. acutissima, Q. dentata and Q. variabilis were collected in the experimental forest of Kangwon National University. The combined extracts were successively fractionated with n -hexane, methylene chloride and ethyl acetate using a separation funnel. A portion of the ethyl acetate and $H_2O$ soluble materials of each species were chromatographed on a Sephadex LH-20 column using various aqueous MeOH and EtOH-hexane as washing solvents. Spectrometric analysis such as NMR and MS, including TLC, were performed to characterize the structures of the isolated compounds. Gallic acid, (+)-catechin, (-)-epicatechin, (+)-gallocatechin, kaempferol, astragalin, astragalin-6"-O-gallate, isoquercitrin, isoquercitrin-6"-O-gallate and myricetin were isolated from Q. mongolic a leaves. Gallic acid, kaempferol and quercetin were characterized from Q. acutissima leaves. Gallic acid, (+)-catechin, (-)-epicatechin, (+)-gallocatechin, (-)-epigallocatechin, kaempferol, quercetin, guajaverin and tamarixin were identified from Q. dentata leaves. Gallic acid, (+)-catechin, (-)-epicatechin, kaempferol, quercitrin, isoquercitrin and myricetin were purified from Q. serrata leaves. Gallic acid, (+)-catechin, astragalin, astragalin-6"-O-gallate and isoquercitrin were isolated from Q. variabilis leaves. Gallic acid was isolated from all the leaves and could be a taxonomic index on Quercus spp..