• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.45-50
• /
• 1994

This experiment was to investigate the effects of UV radiation and chemical treatments on the color difference in antioxidant (Tris(2,4-di-t-butyl phenoxy) phosphite)-containing polyurethane coats. The results obtained were summerized as follows: 1. The color difference increased as the exposure time of UV radiation increases, but decreased as addition level of antioxidant increaes. 2. After 400 hours exposure to UV radiation, the color difference respectively showed 6.13 and 5.94 at 0.7 % and 1.0 % addition level but appeared more severe below 0.7 % addition level. Thus, antioxidant prevented discoloration effectively. 3. The color difference of films by chemical treatments increased after 8 hours. Color difference of films treated with 5 % acetic acid($CH_3COOH$), 30 % ethyl alchol ($CH_3CH_2OH$) showed 7.31 and 7.30 respectively. 1 % sodium hydroxide treatment showed 1.86 color difference after 8 hours.

• 펄프종이기술
• /
• 제37권4호통권112호
• /
• pp.26-31
• /
• 2005

The purpose of this study was to confirm paper strengthening properties with recently commercialized polyvinylamine. Because of its high cationic charge density, polyvinylamine has been investigated as a size retention and surface coating aids. In this study, we tried to confirm polyvinylamine as wet-end additives to improve dry and wet strength using LBKP and BCTMP pulps. As a result, we found improvement of dry and wet tensile properties of polyvinylamine with BCTMP were much better than LBKP condition. This phenomena could be explained that ionic bonding of cationic charge of polyvinylamine with abundant anionic substances of BCTMP was a very important factor to improve dry and wet strength of paper.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.73-82
• /
• 2001

The ESEM could be used in investigating the fibrous networks developed during handsheet-forming processes with the exception of the stages relating to the actual dispersion of the fibers and the drying of formed sheets. Also the cross-sectional images of swollen fibers were generated with the ESEM but the information given by the images was rarely fresh compared to the CLSM images. The LTSEM was extremely useful in generating images of the microfibrillar structure of a wet fiber with great resolution. However, pretreatment required in the LTSEM chamber was somewhat tedious due to the time consumed in sublimation of ice and sputter coating. For observation of lamellar structure of a hydrated fiber, the LTSEM exhibited greatly detailed structure with high resolution. Finally ESEM and LTSEM should be used in a finite field such as observation of surface morphology in detail.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.1-9
• /
• 2006

Treatment of PET fabrics with alkali, chitosan and Al-mordanting has been carried out and the role of the chitosan coating in the dyeing process was clarified. The pre-treatment was effectively evaluated differences in dyeing behavior between its treated and untreated PET fabrics using wood of Caesalpinia sappan. The pre-treated on PET fabrics has been examined by SEM and evidence for the presence of chitosan sought using a air permeability test. Similar colour fastness by computer color matching(CCM) obtained on both untreated and pre-treated PET fabrics. The pre-treated PET was found to be of a deeper hue to that of its dyed untreated PET and, despite of its better colour depth, the wash fastness of the pre-treated dyeing was comparable to that of its dyed untreated PR. The application of chitosan or mordanting reveled that pre-treatment imparted to the PET additional functional groups that were available for coordination with the Brazilin.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.123-126
• /
• 2006

Existing Deck Plate for a one of system forms, there is various advantage and application actual results increasing rapidly. But design of deck is depending on engineering data collections or design data on deck manufacture ordinarily. When construct, is responsible for deflection occurrence, And Because confirmation of crack occurrence region is impossible, there is difficulty of repair, reinforcement about crack and water leakage. According to got following conclusion as result that economic performance, preservation administration and repair reinforcement develops easy using steel truss snap tie by wedge pin on coating plywood that is slab Panel Wood System Form method of construction there is Deck Plate's advantage. (1) In stab lower part is exposed disjointing in which a criminal is fastened to be interrogated after construction acceptance and repair, reinforcement of crack is possible (2) Construction cost curtailment effect of about 29.2% than conventional type and about 10% than deck plate (3) Construction period reduction of about 3 day than conventional type and about 0.3 day than deck plate (4) Labor curtailment effect more than about $29{\sim}50%$ from conventional type

• 한국가구학회지
• /
• 제23권4호
• /
• pp.407-414
• /
• 2012

In order to develop the end use of cylindrical laminated veneer lumber (LVL) such as wooden crafts, the light resistance properties of natural dye-colored and finished cylindrical LVL was investigated. The study results were as follows; The cross section of LVL showed the higher light resistance than its tangential section, and the light resistance also increased with surface coated. On the other hand, LVL specimen were colored by 9 natural dyes of amur cork-tree etc., and the natural and apparent hue harmonized with wood was found after coating and light resistance test. Particularly, The dyes extracted from amur cork-tree, persimon and sappan wood showed orange color, reddish brown and red color respectively, giving an accenting effect to original wood color.

• 한국인쇄학회지
• /
• 제18권2호
• /
• pp.13-27
• /
• 2000

The UV curing industry is one of the most wide application fields in the coating and printing inks industry. Applications extend to general coating for paper, board, wood tapes, compact discs and holograms, ink, photoresists for imaging processes and adhesives for welding and sealing in circuit boards. The UV-curing resins have advantages of quick set, space saving, clean environment and efficient use of energy. The purpose of this study has been to control of morphology structures consist of UV-curing resins and alkyd resins. Therefore, we are investigated with regard to rheology properties on the exposure to UV-curing, structures and mechanical properties for curing films.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.457-464
• /
• 2013

Traditionally, the material used for the form in reinforced concrete construction has been wood or steel. But recently, aluminum forms have been widely used in wall structures such as apartment buildings. Aluminum is light, easy to handle, and economically advantageous, but the hydrogen gas created due to its reaction with the alkali component in concrete gives rise to air pockets on the concrete's surface, and deteriorates the surface's finishability. In this research, to determine the influence of aluminum material on concrete, the cement paste W/C and its chemical reactivity in alkali and acid solution were analyzed. As a prevention plan, the influence of the number of applications of calcium hydroxide and various surface coating materials was analyzed. Through the analysis, it was found that the surface voids on the aluminum form are the result of the reaction of hydrogen gas with an alkali such as $Ca(OH)_2$. This can be prevented by the surface treatment of $Ca(OH)_2$, separating material and coating material. However, poor surface form and damages to the form are expected to cause quality degradation because of the aluminum-concrete interaction. Therefore, thorough surface treatment, rather than the type of separating material or coating material, is considered the most important target of management.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.96-104
• /
• 2008

본 연구에서는 고대 칠 기법을 규명하기 위하여 4가지 그룹의 표준칠편을 제작하여 광학현미경(투광, 낙사광, 편광)을 이용한 관찰을 실시하였다. 그룹 I 은 투명한 적갈색을 띠며 일부 층의 구분이 불명확하였고 연마가 된 층은 구분이 쉽게 되었다. 그룹 II는 대부분 투명 황갈색을 띠며 목재표면에 먼저 흑색안료를 메운 후 칠한 칠층과 흑색안료를 혼합하여 칠 한 칠층은 구분이 가능하였다. 그룹 III은 칠이 경화되는 과정에서 상층 부분이 먼저 막을 형성하고 내부는 칠과 불포화지방산이 산화 건조되어 상층의 칠층이 분리되어 관찰되었다. 그룹 IV의 칠도 막은 편광에서 관찰시 철 성분이 검은색과 붉은색으로 혼합되어 보이며 토분은 실리카 결정이 빛의 반사에 의하여 구분되어 졌다. 또한 석간주 칠층은 붉은색을 띠고 주칠과 석간주가 혼합된 칠은 윗부분과 아랫부분이 짙은 붉은 색을 띠며 가운데는 밝은 붉은색으로 구분되어 졌다.

• 보존과학회지
• /
• 제31권1호
• /
• pp.13-20
• /
• 2015

목조문화재는 수분의 영향으로 열화의 가속화가 진행되기 때문에 전통적으로 표면을 수분으로부터 차단하기 위해 들기름 및 동유와 같은 유지류를 도포하였다. 그러나 목조문화재에 적합한 유지류 코팅 방법 및 성능에 대한 체계적인 연구가 부족한 실정이다. 본 연구는 천연 유지류 3종과 오일스테인 2종의 목재의 방향별, 공시재의 시간 경과 및 유지류의 중탕 여부에 따른 방수 성능을 평가하여 현장 적용 가능성을 판단하였다. 건전 목재의 섬유방향에서 상온의 천연유지류 코팅제 방수성능은 대조군과 비교하여 약 79.2%를 차단하였으며, 특히 동유는 90.5%의 수분을 차단할 정도로 우수한 성능을 나타냈다. 2년간 실내에서 컨디셔닝을 실시한 경우 유지류의 방수 성능은 약 8.8% 감소하였다. 유지류를 중탕하여 사용할 경우 약 5.0%의 방수 성능이 향상되며, 특히 아마인유는 중탕하여 사용할 경우 약 9.6%의 방수 성능을 개선할 수 있다.