• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.79-87
• /
• 2006

Value-added utilization of the disposed ash trees due to the infestation by Emerald Ash Borer (EAB) was explored by converting them into particleboards (PBs) and wood-plastic composites (WPCs). The experimental result showed that PB panels could be successfully manufactured from the ash wood but compaction ratio need to be higher than 1.3 in order to meet the standard requirements listed by American National Standards Institute (ANSI). Ash wood plastic composites with high density polyethylene (HDPE) and polypropylene (PP) were also prepared with additives by extrusion. Physical and mechanical properties of ash wood plastic composite compared favorably to those made of pine and maple.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.11-15
• /
• 2017

우드칩 분진 발생량은 우드칩 기반 난방과 에너지 수요가 증가함에 따라 계속적으로 증가할 것으로 기대된다. 따라서 우드칩 분진의 활용에 대한 관심도 증가하고 있다. 이 연구를 통해 우드칩 분진의 재활용을 위한 일안으로 열병합 발전으로부터 발생한 우드칩 분진에 대한 물리적, 화학적 특성을 분석했다. 화학 분석 결과 우드칩 분진의 주된 구성성분은 실리카, 알루미나, 알칼리로 나타났다. 우드칩 분진에 대한 strength activity index 분석과 석탄재와의 비교를 통해 이차 시멘트계 재료로써 재활용 가능성을 확인했다. 90일 동안 경화한 우드칩 분진에 대한 strength activity index 최대값은 78%였으며 이는 시멘트계 재료에 대한 혼합물로써 재활용할 수 있음을 제시하는 결과이다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제13권2호
• /
• pp.97-101
• /
• 2006

The efficacy of wood ash from Terminalia arjuna (arjun) and T. tomentosa (asan) has been tested against virosis of tasar silkworm, Antheraea. mylitta D. The Polyhedral Occlusion Bodies (POBs) of Cytoplasmic Polyhedrosis Virus of A. mylitta (AmCPV) were exposed to the aqueous solution (0.5 to 4%) of wood ash for 5 to 30 minutes. The treated suspension of POBs was orally inoculated once to tasar silkworm larvae after 24 hours of $1^{st}$ moult, and larvae reared in indoor on arjun leaves till spinning. The application of aqueous solution of wood ash has established its potential as antiviral agent against cytoplasmic polyhedrosis virus. Two percent aqueous solution of wood ash from arjun and asan dissolved the Polyhedral Occlusion Bodies (POBs) of cytoplasmic polyhedrosis virus of tasar silkworm and inactivated the virions within a short period of 20 to 30 minutes. In vivo efficacy of aqueous solution of wood ash resulted in reduction of larval mortality due to virosis. The mortality was reduced to $2.56{\pm}0.21\;and\;3.03{\pm}0.32%$ when treatment of 2.0% solution of wood ash of arjun and asan respectively were applied for 20 minutes, compared to inoculated control $(92.18{\pm}7.52%)$. No mortality was recorded when treatment of 2.5% solution of wood ash of arjun and asan were applied for 10 minutes or more.

• Journal of Forest and Environmental Science
• /
• 제25권2호
• /
• pp.127-130
• /
• 2009

This study has been carried out to investigate the characteristics of the commercial wood pellets such as moisture content, heating value, ash content, and chemical component. The wood pellets from national forestry cooperatives federation and China were evaluated to see if they can be 1st or 2nd class of Korea standard. Indonesian pellet was estimated to be a 3rd class because of the heating value and high ash content. It is considered that there is a quality difference in wood pellets in accordance with the production nations. It could be originated from the difference of raw materials produced in different region.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.

• 에너지공학
• /
• 제23권3호
• /
• pp.211-220
• /
• 2014

본 연구에서는 목재펠릿의 연소 시 발생되는 타르, 재, 클링커의 생성 특성 분석과 더불어, 1등급 목재펠릿의 함수율에 따른 목재펠릿보일러의 성능 분석이 수행되었다. 타르는 목재펠릿이 연소됨에 따라 생성되어 연소실 전열면에 부착되었고, 전열면에 부착되거나 배기가스와 함께 배출되지 못한 재의 경우, 바닥면에 축적되었으며, 클링커는 3등급 목재펠릿의 연소 중에 버너부에서 생성, 고형화되는 것으로 나타났다. 목재펠릿의 등급이 결정되는 요인으로써 함수율은 중요한 요인으로 작용된다. 벌채부산물을 이용한 목재펠릿은 불균일한 함수율로 인해, 연소 생성물의 발생량이 증가되는 경향을 나타내었으며, 이에 따른 연소시스템에서의 효율 저하, 시스템 작동 오류 등의 문제점이 발생되었다. 특히, 목재펠릿의 함수율에 따른 목재펠릿보일러의 성능 분석에서, 1등급 목재펠릿의 함수율이 6.6%p 증가하였을 때, 보일러효율이 약 27.08%p 감소되는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제38권4호
• /
• pp.335-352
• /
• 2024

Low carbon energy demand in South Korea is increasing, hence leading to an increasing usage of wood pellets and the amount of its combustion by-product called wood pellet fly ash (WA). In an effort to develop recycling technology, this research investigates the use of WA as a new sustainable binder for backfill soil materials. The influence of WA on weathered granite soils (WS) is investigated by mixing 5%, 15%, and 25% of WA dosage, compacted at optimum moisture content, then cured for 3, 7, 14, and 28 days. After curing, the compacted specimens were investigated through unconfined compressive tests, pH tests, total suction tests, and microstructural analysis. The findings suggest that the higher the dosage rate, the higher strength and modulus. Additionally, the alkali ions of WA aid in the cementation of WS particles, and newly cementitious minerals are confirmed after 28 curing days. The refinement of pore microstructures led to a denser WS matrix and stiffness improvements. The results validate the binding potential of wood pellet fly ash on weathered granite soils in terms of strength, modulus, and microstructures.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.223-232
• /
• 2014

To make metalized wood composites of 10 different korean wood species, it was tested by Low temperature melting Bi-Sn alloy injection method at high temperature and high pressure condition. Metalized wood composite of each wood species had light ash color, but still maintained its own natural wood grain and wood figures. It was evaluated on coating properties. Furthermore, it also was check on effect of coating as like a changes of main color, wood grain and wood figures. The results of test were following as; a coating properties as like a cold resistance, heat resistance, acid resistance, alkali resistance, durability of abrasion, and cross-cut test was proper on the conditions of the KS standard. And, In aspect of color changes, the metalized wood composites of 10 different korean wood species had a light ash color, but still maintained its own natural wood grain and wood figures. Also, the more weight per gain of alloy is, the more grey background of metalized wood composite is.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.158-164
• /
• 2004

우리 주변에서 쉽게 구할 수 있는 12가지 나무와 참나무잎, 소나무껍질 등을 나무 부위별로 구분하여 나무재를 만들어 한국적 천연 재유의 특성을 연구ㆍ분석한 결과 나무재의 주성분은 CaO이며 소나무껍질재는 $SiO_2$, 참나무잎재의 주성분은 CaO와 $SiO_2$이다. 아카시아나무재, 미루나무재 및 대추나무재는 다른 나무재에 비해 MgO와 Fe$_2$ $O_3$ 성분이 많이 함유되어 있어 노랑색기를 띤 녹색유약으로 나타났으며 UV에 의한 4분류 중 가장 채도가 높아 맑은 색을 지닌 투명유 제조에 적합하다. 포도나무재, 배나무재 및 참나무재는 재 안에 많이 함유된 Fe$_2$ $O_3$, MgO 및 MnO의 영향을 받아 UV 분석결과 노랑색기를 띤 녹색 현상이 나타났으며 다른 나무재보다 P$_2$ $O_{5}$의 함량이 많아 온화하고 안정된 느낌을 주는 유백현상이 강하게 나타나 유백유 제작에 적합하다. 소나무재, 플라타너스나무재 및 느티나무재는 다른 나무재에 비해 CaO 성분과 P$_2$ $O_{5}$ 성분이 많아 12가지 나무재 중 가장 선명하고 푸른색기가 많은 녹색 현상이 나타나 청자유약제조에 적합하다. 자작나무, 참나무, 밤나무는 소량으로 유약의 색상에 많은 영향을 주는 MnO가 가장 많이 함유되어 있고 아카시아나무재, 미루나무재, 대추나무재 보다는 약하지만 노랑색기를 띤 녹색유 현상이 나타나 이라보 유약 제조에 적합하다.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.33-41
• /
• 1997

This paper surveys the extraction condition of polygenetic natural dye, Sappan Wood and the effect of ash to the dyeability and fastness. The appropriate time for extracting Sappon Wood was 1hour. The pH was increased as the amount of ash increase. The pH was nearly invariable according to the time of ash solution, the extracting times and temperature. Absorbance of dyeing fabrics was about 480nm. From the result of K/S value determination of fabrics, 10g/$\ell$ quantity of ash was surfficient for treatment and the amount of Sappon Wood was in 100% o.w.f.. K/S value of fabrics pre-mordanted or post-mordanted were higher than that of fabrics simultaneous mordanted.K/S value was increased as pH of mordanting bath decrease and pre-mordanting and post-mordanting fabrics increased the amount of absorption (K/S value) compared with non-mordanted fabrics. It was found that pH of mordanting bath affected the amount of absorption and color change of dyed fabrics. Light fastness of fabric dyed was very poor and the fastness of fabric dyed was not influenced by the mordanting conditions and methods.