• 보건교육건강증진학회지
• /
• 제8권1호
• /
• pp.34-44
• /
• 1991

Since it was found out that the degree of medical contribution to health was timid. the direction of health policy studies has been focused on the personal health behavior. Participation in health has been closely related to the behavior. Those who have insisted on the new direction believe that the health policy laying stress on low cost and personal responsibility can avoid the pathology of medical policy and medical crisis. Participation in health has been very important method of changing health behaviors. It is certainly important to change bad health behaviors. But there is no deliberation of social structure here. Most health behaviors are the adaptation to social structure. The attempt to change the established adaptation behaviors without considering social structure is difficult to succeed. It is little meaningful to say the importance of the health behavior to those who have no choice but to be ill due to the poor environment and health risks. What can guarantee the real direction of community participation at least is the consciousness and behaviors of people's right.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.245-250
• /
• 2002

A successful on-line monitoring system for conventional machining operations has the potential to reduce cost, guarantee consistency of product quality, improve productivity and provide a safer environment for the operator. In fee-shape machining, typical signs of tool problems such as vibration, noise, chip flow characteristics and visual signs are almost unnoticeable without the use of special equipment. These characteristics increase the importance of automatic monitoring in fine-shape machining; however, sensing and interpretation of signals are more complex. In addition, the shafts of the micro-tools break before the typical extensive cutting edge of the tool gets damaged. In this study, the existence of a relationship between the characteristics of the cutting force and tool usage was investigated, and tool breakage detection algorithm was developed and the fellowing results are obtained. In data analysis, didn't use a relative error compare which mainly used in established experiment and investigated tool breakage detection algorithm in time domain which can detect AE and cutting force signals more effective and accurate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.474-477
• /
• 2002

Safety is very important to operate nuclear power plant. To guarantee the safety, nuclear power plant should be run without trouble. This paper presents the application of a failure diagnosis approach based on discrete event system theory to the pressurizer pressure control system for Pressurized Water Reactor. Also, this paper shows a scheme of failure diagnosis by distributed diagnoser.

• 한국국방경영분석학회지
• /
• 제30권1호
• /
• pp.107-134
• /
• 2004

Today's Internet is providing a single service which is so-called "best-effort service". Now, multimedia and real-time applications are not only demanding large bandwidth but also requiring high QoS. For this, MPLS and DiffServ technology can be adopted to support more scalability and QoS for data traffic engineering. The DISN(Defense Information Systems Network) supports CBR service for voice traffic and VBR service for data traffic which is best-effort service. We propose how to adopt MPLS and DiffServ technology to support traffic engineering and guarantee QoS in the DISN. A traffic analysis according to prioritized traffic classes is done using OPNET simulation tool for assuring QoS. The result shows that low priority packets are delayed a little bit, but high priority packets are transferred more efficiently than without traffic engineering.gineering.

• 대한산업공학회지
• /
• 제32권3호
• /
• pp.219-225
• /
• 2006

We consider a routing and wavelength assignment (RWA) for the efficient operation of WDM networks. For a given physical network, a set of selected pairs of nodes, the number of required connections for each selected pair of nodes, and a set of available wavelengths, the RWA is to realize as many connections as possible without wavelength collision. We give an integer programming formulation and an algorithm based on column generation. Though the proposed algorithm does not guarantee optimal solutions, test results show that the algorithm gives probably good solutions.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.565-572
• /
• 2013

The sensorless speed control using the improved full-order flux observer for PMSM is proposed in this paper. A conventional full-order flux observer has a drawback that the estimated flux of this observer contains the ripple component at the low speed range due to the increased gains of the convectional full-order flux observer. The improved full-order flux observer with the modified gains guarantee the improved estimation performance without ripple component at the from zero to high speed range. To identify the performance of proposed observer, the simulation and experiment are conducted and this performance is compared with the conventional full-order observer.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.106-110
• /
• 2001

The Analytic Hierarchy Process (AHP) is well suited to group decision making and offers numerous benefits as a synthesizing mechanism in group decisions. To date, the majority of AHP applications have been in group settings. In general, aggregation methods employed in AHP can be largely classified into two methods: geometric mean method and (weighted) arithmetic mean method. In a situation where there do not exist clear guidelines for selection between them, two methods do not always guarantee the same group decision result. Thus we suggest a simulation approach for building group consensus as a complementary tool, even when just group judgments are required. Without any efforts to make point estimates from individual diverse preference judgments, a simulation approach suggests the process how the individual preference judgments are aggregated into consensus, displaying possible disagreements as is natural in group members' different viewpoints.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2010년도 하계학술대회
• /
• pp.32-35
• /
• 2010

This paper presents an efficient monitoring method of a network protocol for a downloadable conditional access system (DCAS) that can securely transmit conditional access software via a bi-directional communication channel. In order to guarantee a secure channel based on mutual authentication between a DCAS head end server and set-top boxes, DCAS messages are encrypted and digitally signed. Owing to applied cryptographic algorithms, it is impossible to get information from messages directly without additional processing. Through categorizing DCAS messages into several groups, the proposed monitoring method can efficiently parse and trace DCAS messages in real-time. In order to verify the stability and effectiveness of the proposed monitoring method, we implement a DCAS monitoring system capable of capturing and parsing all DCAS messages. The experimental results show that the proposed monitoring method is well designed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.506-511
• /
• 2007

Mechanical behavior of copper nanowire is investigated. An FCC nanowire model composed of 1,408 atoms is used for MD simulation. Simulations are performed within NVT ensemble setting without periodic boundary conditions. $Nos\acute{e}-Poincar\acute{e}$ MD algorithm is employed to guarantee preservation of Hamiltonian and temperature. Numerical tensile tests of Nanowire are carried out with constant strain rate. Additionally, temperature and strain rate effects are considered. Stress-strain curve is constructed from the calculated Cauchy stresses and specified strain values. In (22,4,4) Copper nanowire, non-linear behavior appears around ${\epsilon}\simeq0.09.$ At this instance, starting of structural reorientations are observed. At the onset of reorientation, the modulus characteristics are also investigated.

• 한국정밀공학회지
• /
• 제9권1호
• /
• pp.53-65
• /
• 1992

For improving the performance of maglev systems with a combined lift and guidance, it is suggested that the multivariable control systems and a secondary suspension should be added. The former is required to reject both track irregularities in vertical disturbances and wind gusts in lateral disturbances, and the latter to guarantee passengers against an unsatisfied criteria in ride quality. In this paper, bond graph model for the study of nonlinear dynamics of maglev systems with a combined lift and guidance is presented briefly. And, the secondary suspension is analyzed to understand the role of stiffness and damping factors in passive devices. Finally, LQG/LTR mulitivariable control systems are designed for the overall maglev systems with and without secondary suspension, and then the system performances in these two cases are evaluated.