• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.208-212
• /
• 2003

2.4GHz wireless LAN has come into wide use at present according as the use of wireless LAN limited to special fields like network of enterprises or universities has been made gradual popularization and the need for it is gathering strength. Therefore, in this paper, transmission devices and structures of it is investigated and optimum transmission level of signals is researched through experiment about characteristics and rate of transmission of Packet signals in various User environments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1238-1240
• /
• 2009

In the wireless sensor network, cooperative transmission is an effective technique to combat multi-path fading and reduce transmitted power. Relay selection and power allocation are important technical issues to determine the performance of cooperative transmission. In this paper, we proposed a new multi-relay selection and power allocation algorithm to increase network lifetime. The proposed relay selection scheme minimizes the transmitted power and increase the network lifetime by considering residual power as well as channel conditions. Simulation results show that proposed algorithm obtains much longer network lifetime than the conventional algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1071-1076
• /
• 2015

This paper proposed an efficient algorithm for tension sensing smart fence system with wireless sensor transmission module installation and alarming services. The wired transmission system demonstrates high accuracy and low latency, but the cost is expensive and transmission error may occur. For these reasons, this paper presented to use wireless transmission communication using Zigbee module technology in order to decrease delay and latency and solve the battery issues.

• The Journal of Korean Association of Computer Education
• /
• v.14 no.6
• /
• pp.83-89
• /
• 2011

In this study a smart HDMI switch is proposed to detect newly formed video stream and automatically change the transfer path to the corresponding port without pulling the HDMI plug and putting it again in the desired port manually and physically. Furthermore the proposed switch is designed in the advanced wireless video transmission scheme based on millimeter band technology. The proposed system shows its feasibility by the hardware experiment in the full-HD video transmission performance including the function of the smart port change.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3823-3840
• /
• 2017

This paper analyzes the nodes deployment optimization problem in energy constrained wireless sensor networks, which multi-hop cooperative beamforming (CB) based cooperative-multi-input-single-output (CMISO) transmission is adopted to reduce the energy consumption. Firstly, we establish the energy consumption models for multi-hop SISO, multi-hop DSTBC based CMISO, multi-hop CB based CMISO transmissions under random nodes deployment. Then, we minimize the energy consumption by searching the optimal nodes deployment for the three transmissions. Furthermore, numerical results present the optimal nodes deployment parameters for the three transmissions. Energy consumption of the three transmissions are compared under optimal nodes deployment, which shows that CB based CMISO transmission consumes less energy than SISO and DSTBC based CMISO transmissions. Meanwhile, under optimal nodes deployment, the superiorities of CB based CMISO transmission over SISO and DSTBC based CMISO transmissions can be more obvious when path-loss-factor becomes low.

• Journal of Information Processing Systems
• /
• v.19 no.6
• /
• pp.817-829
• /
• 2023

Variable wireless channel is a big challenge for real-time video applications, and the rate adaptation of realtime video streaming becomes a hot topic. Intra-video coding is important for high-quality video communication and industrial video applications. In this paper, we proposed a novel adaptive scheme for real-time video transmission with intra-only coding over a wireless network. The key idea of this scheme is to estimate the instantaneous remaining capacity of the network to adjust the quality of the next several video frames, which not only can keep low queuing delay and ensure video quality, but also can respond to bandwidth changes quickly. We compare our scheme with three different schemes in the video transmission system. The experimental results show that our scheme has higher bandwidth utilization and faster bandwidth change response, while maintaining low queuing delay.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.6
• /
• pp.43-48
• /
• 2009

Wireless mesh networks, unlike Ad-hoc network, has low mobility and multi-path communication between terminals and other networks because it has the backbone structures. Most studies are advanced on finding the optimal routing path in multi-hop wireless mesh network environment. Various routing metric, minimum number of hops(Hop_count) and ETX, ETT metric, are proposed to wireless mesh networks. However, most metrics cannot identify the high throughput routing paths because this metric uses a different measurement parameters in each direction. So actual delivery rate does not provide to this metric. This paper describes the metric and implementation of IETC as a metric. This paper shows the improvement in performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.293-302
• /
• 2004

Wireless LAN is a rather mature communication technology that connects mobile terminals. A typical wireless LAN system is composed of one AP and more than one terminals, which is called a BSS. Terminals near to an AP can receive high rate data but terminals far from an AP may not receive data with guaranteed high speed rate because received signal strength is weakened. This paper proposes a method to allow high speed data transmission by grouping terminals and using part of wireless terminals as repeaters. We compare and analyze proposed grouping algorithms based on Depth First Search and Breadth First Search via simulations. A grouping algorithm based on Breadth First Search is shown to be more effective in term of efficiency and coverage.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.430-438
• /
• 2013

This paper addresses the issue of throughput-delay of one-to-many wireless multi-hop flows based on random linear network coding (RLNC). Existing research results have been focusing on the single-hop model which is not suitable for wireless multi-hop networks. In addition, the conditions of related system model are too idealistic. To address these limitations, we herein investigate the performance of a wireless multi-hop network, focusing on the one-to-many flows. Firstly, a system model with multi-hop delay was constructed; secondly, the transmission schemes of system model were gradually improved in terms of practical conditions such as limited queue length and asynchronous forwarding way; thirdly, the mean delay and the mean throughput were quantified in terms of coding window size K and number of destination nodes N for the wireless multi-hop transmission. Our findings show a clear relationship between the multi-hop transmission performance and the network coding parameters. This study results will contribute significantly to the evaluation and the optimization of network coding method.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.941-951
• /
• 2016

In this paper, cognitive radio and simultaneous wireless information and power transfer (SWIPT) are effectively combined to design a spectrum-efficient and energy-efficient transmission paradigm. Specifically, a novel SWIPT-based primary-secondary cooperation model is proposed to increase the transmission rate of energy/spectrum constrained users. In the proposed model, a multi-antenna secondary user conducts simultaneous energy harvesting and information forwarding by means of power splitting (PS), and tries to maximize its own transmission rate under the premise of successfully assisting the data delivery of the primary user. After the problem formulation, joint power splitting and beamforming optimization algorithms for decode-and-forward and amplify-and-forward modes are presented, in which we obtain the optimal PS factor and beamforming vectors using a golden search method and dual methods. Simulation results show that the proposed SWIPTbased primary-secondary cooperation schemes can obtain a much higher level of performance than that of non-SWIPT cooperation and non-cooperation schemes.