• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.145-151
• /
• 2009

Orthogonal Frequency Division Multiplexing (OFDM) has been focused on as 4th generation communication method for realization of Ubiquitous Network in land mobile communications services, and has been a standard technology of Wireless Local Area Network (WLAN) for a High Date Rate communication. And in maritime data communication using high frequency (HF) band, 32-point FFT OFDM system is recommended by International Telecommunication Union (ITU). Maritime communication should be kept on connecting when maritime accident or the maritime disaster happen. Therefore, main device FFT should be operated with low power consumption. In this paper we propose a low power 32-point FFT algorithm using radix-2 and radix-4 for low power operation. The proposed algorithm was designed using VHSIC hardware description language (VHDL), and it was confirmed that the output value of Spartan-3 field-programmable gate array (FPGA) board corresponded to the output value calculated using Matlab. The proposed 32-point FFT algorithm will be useful as a leading technology in a HF maritime data communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1486-1491
• /
• 2017

In this paper, we propose a private multimedia caching scheme based on wireless local area network (WLAN) to improve the quality of service for high capacity and high quality multimedia streaming services which are recently increasing and to reduce the traffic load of core networks. The proposed caching scheme stores multimedia in the storage device mounted on WLAN APs and provides streaming services on its own without Internet connection in accordance with the request from clients. We have implemented a test network based on real commercial networks and measured the performance of the proposed caching scheme in terms of frames per second (FPS) and buffering time. According to the performance measurement results, the proposed caching scheme can reduce the average buffering time by 73.3% compared to the conventional streaming scheme. In addition, the proposed caching scheme can also improve the average FPS by 71.3% compared to the conventional streaming scheme.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1559-1570
• /
• 2013

The family of ISO/IEEE11073 standards is the basis of the e-health system and provides interoperability for personal health devices. In the early stage of e-health business, it was expected that people would use a health device individually. In this case, a measurement datum was episodically acquired and generally transmitted for one person at a time. Recently, a health device is expected to be used by multiple people, and large amounts of measurement data are gathered in a short time interval. In addition, mobile health devices have become more popular, so that energy efficient measurement data transmission is required, to prolong the use of a device. In IEEE11073 PHD standards, data transmission is classified into three different types: immediate individual transfer, small block transfer, and large block transfer. The large block transfer using PM-store concept provides efficient transmission. However, an existing PM-store has problem when a device is used by multiple people. To address the defined problem, a modified PM-segment that is in compliance with 11073 standards is proposed in this paper. In particular, the proposed PM-segment is designed to minimize the additional complexity of an agent instead of a manager and it is interoperable with the existing manager. The proposed PM-segment shows better performance than the existing PM-segment, in terms of memory requirements and expected queue time. Also, performance comparison among the three transfers is performed in regard to the delay time and communication power consumption points of view.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.348-353
• /
• 2008

Despite the increasing popularity of wireless sensor network, indoor positioning using low power IEEE 802.15.4 compliant radio had attracted an interest of many researchers in the last decade. Old fashionable indoor location sensing information has been presented in dull and unpleasant 2D image standard. This paper focused on visualizing high precision 3 dimensional RSSI-based (received signal strength indication) spatial sensing information in an interactive virtual reality on PDA. The developed system operates by capturing and extracting signal strength information at multiple pre-defined reference nodes to provide information in the area of interest, thus updating user's location in 3D indoor virtual map. VRML (Virtual Reality Modeling Language) which specifically developed for 3D objects modeling is utilized to design 3D indoor environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.527-533
• /
• 2018

Recently, the device-to-device (D2D) communication has been conceived as the key technology for the next-generation mobile communication systems. The neighbor discovery in which the nearby users are found, is essential for the proper operation of the D2D communication. In this paper, we propose new neighbor discovery scheme based on deep learning technology which has gained a lot of attention recently. In the proposed scheme, the neighboring users can be found using the uplink pilot transmission of users only, unlike conventional neighbor discovery schemes in which direct pilot communication among users is required, such that the signaling overhead can be greatly reduced in our proposed scheme. Moreover, the neighbors with different proximity can also be classified accordingly which enables more accurate neighbor discovery compared to the conventional schemes. The performance of our proposed scheme is verified through the tensorflow-based computer simulations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.883-895
• /
• 2007

In this work, we present the development of a patrol robot which is intended to navigate outdoor rough terrain. Proposed mechanism consists of six legs for overcoming an obstacle, and six wheels for traveling. Also, in order to absorb vibration in rough terrain effectively, the slide-spring system and tubed type tire are adopted to each leg and each wheel. The control system of robot consists of several imbedded boards for management of lots of diverse devices such as sensors designed for rough terrain, motor controllers, camera, micro controller and so on. And the base system of the robot is designed to operate in real time and to surveille in the vicinity of the robot, and the robot system is controlled by wireless LAN connected to GUI-based remote control system, while CAN communication connects the control board and the device controllers for sensors and motor controllers. For operating this robot system efficiently, we propose the control algorithms for autonomous navigation using GPS, stabilization maintenance by posture control, obstacle-avoidance by impedance control, and obstacle-overcoming with interference-avoidance between wheels. The performance of the robot and the proposed algorithms are tested and proved by a set of experiments in outdoor rough terrain.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.283-289
• /
• 2012

In the future, smartphone convergences are not only based on the on/offline integration, but also with the integration between mobile communications and broadcasts. Therefore, there is a need to search for new direction of mobile device that enables variety user applications that are different from the existing size and application issue. The aim of this research is to improve user interface of smartphone's functional attribute. We study on the analysis of smartphone's functional attribute by AHP. The survey results in this paper showed that the most preferable attribute of smartphone among the 8 was the wireless internet 25.3%, followed by messaging 20% and application 19.8%, which totaled to 62.5%. But the samples used were mostly limited to those aged 20 through 30. So the results are not considered as a representative preference of all smartphone users, and should be considered otherwise before materializing them to a product. Therefore, for the more liable results the further research should be conducted to gather data from a variety of users of all ages, and the functional attribute should be analysed through QFD.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.15-27
• /
• 2019

This paper deals with a web-based public address system for conveying information for different institutions. An architecture for a Short Messaging Service (SMS) based public address (PA) system that can be programmed by an authorized mobile phone or device is proposed. This PA system will facilitate information transfer from heads of offices, managers, directors, and deans of the institutions to its constituents or unit area as well as enable postings of information with proper authentication and validation remotely. The system supports high priority messaging, allowing the conveyance of critical and time sensitive information. The mobility management support for the PA system will be based on the Hierarchical Mobile Internet Protocol version 6 (HMIPv6), hence, allowing for a seamless connectivity to the system. The major advantage of this proposed PA system as compared with the traditional electronic displays and bulletin boards is seamless mobility wherein the display devices can be programmed remotely by heads of the institutions and business organization. It also allows faster communication and immediate actions concerning the different institutions, organizations, and businesses, thus, ensuring high productivity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.137-142
• /
• 2016

A two-step open system(TOS) was proposed to relay between a healing platform and a repository of personal health documents. TOS was designed by taking into consideration the pubsub service based on large scale connections to monitor a provider's access/request process for health documents in real time. TOS, however, uses WebSocket as a communication protocol in case of pubsub. Given the operational environment of low quality wireless networks for mobile devices that are user terminals in a healing platform, there is a need to add a messaging protocol to support QoS as well as a transmission protocol. As a light messaging protocol optimized for mobile devices, MQTT defines reliable messaging QoS to consider a wireless network situation of low speed/low quality. This study designed an MQTT protocol-based message broker to support QoS in case of large scale connections and pubsub by taking into consideration mobile devices that are user terminals in a healing platform. After designing a model between TOS and MQTT message broker, the study implemented a prototype based on the proposed design and compared it with its counterparts from previous studies based on the performance indicators in a load-test with the MQTT client tool.