• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.7-12
• /
• 2014

The data forwarding transmission is an important function of the relay in cooperative communication in wireless communication systems. However, additional relay cause the waste of power consumption and cost. Therefore, in this paper, we consider how to use the user mobile devices in stead of relays to deal with this problem. In this paper, we proposed the protocol that divide each relay into two states of idle and non-idle. The receiver has two functions of base station and user mobile device. In this case, it is possible that no additional cost, and improve the spectral efficiency and network capacity. We verified BER performance for the proposed protocol over Rayleigh fading through Monte-Carlo simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.203-210
• /
• 2011

The current sensor network analyzes the data collected by the sensing of fixed sensor nodes and provides a service. However, this method cannot actively handle the state and the change in the position of people, 'the target for sensing and the change in the environment', including home automation, building automation and real-time road & weather information, and healthcare environment, etc. To support a dynamic situation which is appropriate for an individual in this diverse environment, it is necessary to provide actively differentiated specific information according to the movement of people and the changes in the environment. In this study, a individualized sensor mobile agent middleware which provides the individualized information (the location of fire incidence and the trace for the path of spread), has been realized through the sensor network environment constructed by the installation of wireless sensor nodes mounted with mobile agent middlewares in buildings.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.151-155
• /
• 2017

With the rapid growth of the up-to-date wireless network and Internet technologies, huge and various types of things around us are connected to the Internet and build the hyper-connected society, and lots of smart applications using these technologies are actively developed recently. IoT connects human, things, space, and data with various types of networks to construct the hyper-connected network that can create, collect, share and appling realtime information. Furthermore, most of the smart applications are concentrated on the service that can collect and store realtime contexts using various sensors and cloud technology, and provide intelligence by making inferences and decisions from them nowadays. In this paper, we design a smart application that can accurately control and process the current state of the specific context in realtime by using the state-of-the-art ICT techniques such as various sensors and cloud technologies on the IoT based mobile computing environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.183-189
• /
• 2018

With the recent advancement of vehicle wireless communication technology, many vehicular clouds have been proposed. The existing research focused on cloud services through data collection based on vehicular networks of mobile V2V (Vehicle-to-Vehicle) and V2I (Vehicle-to-Infrastructure). In this paper, we present a vehicular datacenter model that utilizes the vehicle in the parking space as a resource for the datacenter. Also, we derive resource allocation strategy based on the expected execution time considering the leave rate of each vehicle in our vehicular datacenter model. Simulation results show that our proposed resource allocation strategies outperform the existing strategy in terms of mean execution time.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.125-130
• /
• 2011

In this paper, there was compared to the performance of the Auto Correlation Feature of each code using Spreading code for improving the data transmission technology in T-DMB disaster broadcasting. Generally, wireless mobile communication environment such as DMB occur the Inter Code Interference and the Multi-Path Interference in the process of the identification of the transmitter from the receiver. To solve this problem, spreading code technology was able to improve the security property. Also, it will be able to use in many fields of signal processing, because to control a period of the code can be variable. Therefore, in this paper, we studied to compare the performance of excellent orthogonal Golay code, Kasami code and ZCD(Zero Correlation Duration) code.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.9-17
• /
• 2019

As the IoT environment becomes more popular, the safety of the M2M environment, which establishes the communication environment between objects and objects without human intervention, becomes important. Due to the nature of the wireless communication environment, there is a possibility of exposure to security threats in various aspects such as data exposure, falsification, tampering, deletion and privacy, and secure communication security technology is considered as an important requirement. In this paper, we propose a new method for group key generation and exchange using trap hash collision hash in existing 'M2M communication environment' using hash collision, And a mechanism for confirming the authentication of the device and the gateway after the group key is generated. The proposed method has attack resistance such as spoofing attack, meson attack, and retransmission attack in the group communication section by using the specificity of the collision message and collision hash, and is a technique for proving safety against vulnerability of hash collision.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.23-28
• /
• 2023

In a wireless smart utility network communication system, an asynchronous low power MAC is standardized and used according to IEEE 802.15.4e. An asynchronous MAC called RIT (Receiver Initiated Transmission) has a characteristic in which delay time and power consumption are greatly affected by a check-in interval (RIT period). By waking up from sleep every check-in interval and checking whether there is data to be received, power consumption in the receiving end can be drastically reduced, but power consumption in the transmitting end occurs due to an excessive wakeup sequence. If an excessive wake-up sequence is reduced by shortening the check interval, power consumption of the receiving end increases due to too frequent wake-up. In the RIT asynchronous MAC technique, power consumption performance according to traffic load and operation of check-in interval is analyzed and applied to Wi-SUN construction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.3
• /
• pp.29-45
• /
• 2017

Ad hoc sensor network is characterized by decentralized structure and ad hoc deployment. Sensor networks have all basic features of ad hoc network except different degrees such as lower mobility and more stringent energy requirements. Existing protocols provide different tradeoffs among some desirable characteristics such as fault tolerance, distributed computation, robustness, scalability and reliability. wireless protocols suggested so far are very limited, generally focusing on communication to a single base station or on aggregating sensor data. The main reason having such restrictions is due to maximum lifetime to maintain network activities. The network lifetime is an important design metric in ad hoc networks. Since every node does a router role, it is not possible for other nodes to communicate with each other if some nodes do not work due to energy lack. In this paper, we suggest an experimental ad-hoc on-demand distance vector routing protocol to optimize the communication of energy of the network nodes.The load distribution avoids the choice of exhausted nodes at the route selection phase, thus balances the use of energy among nodes and maximizing the network lifetime. In transmission control phase, there is a balance between the choice of a high transmission power that lead to increase in the range of signal transmission thus reducing the number of hops and lower power levels that reduces the interference on the expense of network connectivity.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.155-160
• /
• 2011

IPTV functions not only as media player that does play the broadcasting industry's contents, also as the gateway is guaranteed of QoS(Quality of Service). This is for free contents-sharing that device stores contents using home network circumstance, and is for watching with seamless network service. Also this have required next QoS model that can handle stably as it may contain more data of the small computing device in next generation home system. We need ubiquitous-oriented QoS's design and development project that focuses on internal and external media service, not the existing QoS nor one-sided QoS of media sevice industry. This paper focuses on network module development. This supports IPTV in media industry and two-way capability of QoS highlighting multimedia service in network industry. In additional, this can handle stably the multiplex signal of USN/RFID as the representative ubiquitous and home network that services high-speed wire and wireless interface, and support the seamless u-QoS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.324-329
• /
• 2005

In the traditional telephone services, the settlement method for usage of facilities has been systematically and reasonably arranged based on the cost. Through the advanced technology, the telecommunication services such as the convergence of voice-data, wire-wireless, communication-broadcasting, etc are offering. So, new settlement method in the broadband convergence network (BCN) should be necessary. This paper suggests inter-companies settlement method in the broadband network using interconnection bandwidth and transmission distance factor. By reflecting the facility cost weight on each BCN level, the cost settlement for various services can be easily done. As the settlement model for BCN, the inter-companies interconnection and settlement can be normalized by interconnection bandwidth and transmission distance factors.