• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.253-256
• /
• 2001

This paper describes a high speed MAC(Media Access Control) function chip for IEEE 802.11 MAC layer protocol. The MAC chip has control registers and interrupt scheme for interface with CPU and deals with transmission/reception of data as a unit of frame. The developed MAC chip is composed of protocol control block, transmission block, and reception block which supports the BCF function in IEEE 802.11 specification. The test suite which is adopted in order to verify operation of the MAC chip includes various functions, such as RTS-CTS frame exchange procedure, correct IFS(Inter Frame Space)timing, access procedure, random backoff procedure, retransmission procedure, fragmented frame transmission/reception procedure, duplicate reception frame detection, NAV(Network Allocation Vector), reception error processing, broadcast frame transmission/reception procedure, beacon frame transmission/reception procedure, and transmission/reception FIEO operation. By using this technique, it is possible to reduce the load of CPU and firmware size in high speed wireless LAN system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1679-1691
• /
• 2016

Successive interference cancellation (SIC) is an effective means of multi-packet reception to combat interference at the physical layer. We investigate the joint optimization issue of channel access and power control for capacity maximization in SIC-enabled wireless networks. We propose a new interference model to characterize the sequential detection nature of SIC. Afterward, we formulize the joint optimization problem, prove it to be a nondeterministic polynomial-time-hard problem, and propose a novel approximation approach based on the genetic algorithm (GA). Finally, we discuss the design and parameter setting of the GA approach and validate its performance through extensive simulations.

• Journal of Communications and Networks
• /
• v.15 no.6
• /
• pp.606-613
• /
• 2013

This paper proposes a complete solution of a contention-based medium access control in wireless local networks to provide station level quality of service guarantees in both downstream and upstream directions. The solution, based on the mature distributed coordination function protocol, includes a new fixed contention window backoff scheme, a tuning procedure to derive the optimal parameters, a super mode to mitigate the downstream bottleneck at the access point, and a simple admission control algorithm. The proposed system guarantees that the probability of the delay bound violation is below a predefined threshold. In addition, high channel utilization can be achieved at the same time. The numerical results show that the system has advantages over the traditional binary exponential backoff scheme, including efficiency and easy configuration.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.86-91
• /
• 2005

Regarding some of tire important works in tire shipyard, like tire production process, quality control, and material handling, there are many elements that disturb tire work-flaw. For example, there are mistakes in manufacturing, delay of production, and poor quality. These kinds of disturbances are from tire delay of communication time between tire production field and tire management. Therefore, it would be possible to strengthen tire competitiveness of shipbuilding industries by applying tire information technology based on Wireless Local Area Network (Wireless LAN), in order to establish tire multi-possession of real time production information in limited large shipbuilding yard. In this study, tire construction concept of tire information system, based on Wireless LAN, is proposed to build communication infrastructures in shipyards. The various information regarding shipbuilding inspection, process management, and material flaw are analyzed and constructed to databases in tire middle ware system, as tire platform for using Personal Display Agent (PDA). At last, tire middle ware system, which delivers tire information, is developed by tire C$\sharp$ and Microsoft.net; also, tire PDA application system is structured in WinCE O/S, and is tested and evaluated under tire server linked condition.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4188-4206
• /
• 2016

Power control is widely used to reduce co-channel interference in wireless networks and guarantee the signal-to-interference plus noise ratio (SINR) of ongoing connections. This technique is also effective for wireless body area networks (WBANs). Although achieving satisfactory SINR is important for WBAN users, they may not be willing to achieve it at arbitrarily high power levels since power is a scarce resource in WBANs. Besides, for WBANs with different purposes, the QoS requirements and concern about the power consumption may be different. This motivates us to formulate the power control problem using the concepts from microeconomics and game theory. In this paper, the QoS objective is viewed as a utility function, which represents the degree of user satisfaction, while the power consumption is viewed as a cost function. The power control problem consequently becomes a non-cooperative multiplayer game, in which each player tries to maximize its net utility, i.e., the utility minus the cost. Within this framework, we investigate the Nash equilibrium existence and uniqueness in the game and derive the best response solution to reach the Nash equilibrium. To obtain the optimal transmission power in a distributed way, we further propose a utility-based and QoS-aware power control algorithm (UQoS-PCA). Tunable cost coefficient in UQoS-PCA enables this scheme to be flexible to satisfy diverse service requirements. Simulation results show the convergence and effectiveness of the proposed scheme as well as improvements over existing algorithm.

• 전자공학회논문지 IE
• /
• v.48 no.2
• /
• pp.61-70
• /
• 2011

IEEE 802.11 wireless network supports control frames like RTS/CTS(Request To Send / Clear To Send). Because they is defend to frame collection problems. It helps to solve the frame collection problem but decreases the throughput rate. Also, control frame makes False Node Problem. This problem is makes to other wireless nodes don't work and don't find channels in the same cell and near cells. We proposed a reformed new control frame for efficiency throughput rate and solution of False Node Problem. New control frame is to have added to 4 bytes of channel detection ability at the RTS frames. Channel detection ability supported to check channel at the wireless node start to transmit data frame, We expect that channel detection ability make prevent False Node Problem for increase to access number to channel. We perform comparative analysis in terms of delay(sec) and load(bits/sec) with reform RTS/CTS method which proves the efficiency of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6B
• /
• pp.1088-1097
• /
• 1999

In this paper we describe our investigation en ATM CLR(Cell Loss Rate) in the wireless ATM Networks, which consist of wireless access nodes and wireless links. A wireless access node is modelled as the ND/D/1queue. A wireless channel is modelled as channel with single and burst error characteristics, and it can be seen that the CLR degrades on a link with burst errors than on a link with single error. Because wireless channel can be approximated as the Rayleigh or Rician fading channel and wireless communication systems are power limited, it is customary that the CLR degrades on a link with burst errors than on a link with single error. So error control method should be used to improve performance degradation caused by burst errors. We consider the forward error correction(FEC) as error control scheme for CBR traffics to improve performance degradation caused by burst errors, and analyze performance of concatenated FEC scheme through the use of CLR.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.122-124
• /
• 2007

Master and slave of teleoperation control system through internet or long distance cable must keep stable. If one part becomes unstable or time delay happens in network, the all system can become unstable. Usually stability of teleoperation control system can distinguish by passivity. In this paper, we implemented bilateral teleopcration control system that load passivity controller to keep stability of system. Composed by manipulator that trillion this sricks and horizontal manufacturing that have force reflecting function are available and embodied so that control through wireless LAN may be available. And distinguished stability through an experiment and manufacturing performance.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.396-404
• /
• 2007

In this paper, an Ad-hoc Routing Protocol which works in wireless Ad-hoc communication networks with multiple radios and multiple channels, and controls call admission based on bandwidth measurement is proposed. Unlike the conventional Ad-hoc node with a single radio using a single channel, an Ad-hoc node of the protocol proposed, MCQosR(Multiple Channel Quality of Service Routing), has multiple radios and uses multiple channels, which makes full duplex transmission between wireless Ad-hoc nodes, and reduces the intra interference on a route. Also, a fixed channel only for reception at each node enables the measurement of the available bandwidth, which is used to control the call admission for QoS provision. The performance of MCQosR is verified by simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.572-580
• /
• 2010

The Wireless Mesh Network uses a wireless communication technology with transmission rates simular to a cable which is used as a backbone networks. The topology structure is in a Mesh form which resembles an Ad-hoc networks. However, a metric is needed in order to set the channel access control method to operate intentions and interior motions are different. In this document, an efficient channel for delivering datas to improve access controls to a wireless mesh networks. The improved performance of the proposed plan is for a hidden and exposed mesh client through an exclusive channels to perform a proposed and analyzed methods.