• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3176-3183
• /
• 2011

Traffic and congestion control in the wireless sensor network is an important parameter that decides the throughput and QoS (Quality of Service). This paper proposes a transmission rate priority-based traffic control scheme to serve digital contents streaming in wireless sensor networks. In this paper, priority for transmission rate decides on the real-time traffic and non-real-time with burst time and length. This transmission rate-based priority creates low latency and high reliability so that traffic can be efficiently controlled when needed. Traffic control in this paper performs the service differentiation via traffic detection process, traffic notification process and traffic adjustment. The simulation results show that the proposed scheme achieves improved performance in delay rate, packet loss rate and throughput compared with those of other existing CCF and WCA.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2018

Recently, there have been many studies on the IoT environment in which the sensors attached to the equipment automatically transmit and process the site information in real time through the network to control the equipment. The core of such a system is a network for data transmission and reception, and a wired network with wide transmission distance is a priority. However, in the case of a wired network, there is a problem that the time and cost consumed to configure the communication is higher than that of the wireless. In this paper, we propose LPWA - based wireless data transmission system using LPWA and BLE communication to solve this problem. The proposed system collects data from equipment through BLE and transmits data to the server using LPWA. Experimental results show that the spreading factor of maximum length of LPWA is 8, and the minimum length is 9.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.266-276
• /
• 2011

In wireless networks, it is well-known that intermediate nodes can be used as cooperative relays to reduce the transmission energy required to reliably deliver a message to an intended destination. When the network is under a central authority, energy allocations and cooperative pairings can be assigned to optimize the overall energy efficiency of the network. In networks with autonomous selfish nodes, however, nodes may not be willing to expend energy to relay messages for others. This problem has been previously addressed through the development of extrinsic incentive mechanisms, e.g., virtual currency, or the insertion of altruistic nodes in the network to enforce cooperative behavior. This paper considers the problem of how selfish nodes can decide on an efficient energy allocation and endogenously form cooperative partnerships in wireless networks without extrinsic incentive mechanisms or altruistic nodes. Using tools from both cooperative and non-cooperative game theory, the three main contributions of this paper are (i) the development of Pareto-efficient cooperative energy allocations that can be agreed upon by selfish nodes, based on axiomatic bargaining techniques, (ii) the development of necessary and sufficient conditions under which "natural" cooperation is possible in systems with fading and non-fading channels without extrinsic incentive mechanisms or altruistic nodes, and (iii) the development of techniques to endogenously form cooperative partnerships without central control. Numerical results with orthogonal amplify-and-forward cooperation are also provided to quantify the energy efficiency of a wireless network with sources selfishly allocating transmission/relaying energy and endogenously forming cooperative partnerships with respect to a network with centrally optimized energy allocations and pairing assignments.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.290-292
• /
• 2009

With advance in technologies for wireless sensor networks(WSNs), 2.4 GHz band has become gradually attractive due to increase in low-power wireless communication devices. Especially ZigBee(IEEE 802.15.4-based) technology whose frequency band includes the 2.4GHz industrial, scientific and medical band providing nearly worldwide availability has been universally applicable to a various remote monitoring system and applications related home network system. However network throughput of these systems is significantly deteriorated due to this ISM band is a license-exemption used in a variety of low-power wireless communication devices. For instance, other IEEE 802 wireless standards such as Bluetooth, WLAN, Wi-Fi and others cause radio interference to ZigBee. The experiments was carried out to analyze radio frequency interference between heterogeneous devices using ISM bands to improve the limited frequency utility factor. Finally this paper suggests a frequency hopping-based adaptive multi-channel methods to decrease interference with empirical results.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.38-50
• /
• 2011

For energy-efficiency in Wireless Sensor Networks (WSNs), when a sensor node detects events, the sensing period for collecting the detailed information is likely to be short. The lifetime of WSNs decreases because communication modules are used excessively on a specific sensor node. To solve this problem, the TARP decentralized network packets to neighbor nodes. It considered the average data transmission rate as well as the data distribution. However, since the existing scheme did not consider the energy consumption of a node in WSNs, its network lifetime is reduced. The proposed scheme considers the remaining amount of energy and the transmission rate on a single node in fitness evaluation. Since the proposed scheme performs an efficient congestion control it extends the network lifetime. The simulation result shows that our scheme enhances the data fairness and improves the network lifetime by about 27% on average over the existing scheme.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.1-8
• /
• 2014

In wireless body sensor system(WB-SNSs), unlike existing sensor network system, the size of device is small and amount of battery is considerably limited. And various channel environments can be made by link channel characteristic, human movements, sensor placements, transmission power control(TPC) algorithms and so on. In this paper, therefore we take diverse experiments with totally considerated environments to overcome these restrictions and to manage the energy efficiently and find the value of target received signal strength indicator(RSSI) based on diverse factors such as human movements, sensor placements, and TPC algorithms. And we conduct analysis in terms of energy consumption and packet delivery rate(PDR) based on the experimental results. Through these analysis, we compare and evaluate the efficiency according to setup values of Target RSSI and Target RSSI range suitable for wireless body sensor network system.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.407-416
• /
• 2009

Recently, various application services in wireless sensor networks are more considered than before, and thus reliable and secure communication of sensor network is turning out as one of essential issues. This paper studies such communication in IEEE 802.15.4 based sensor network. We present IMHRS (IEEE 802.15.4 MAC-based Hybrid hop-by-hop Reliability Scheme) employing EHHR (Enhanced Hop-by-Hop Reliability), which uses Hop-cache and Hop-ack and ALC (Adaptive Link Control), which considers link status and packet type. Also, by selecting security suite depending on network and application type, energy efficiency is considered based on HAS (Hybrid Adaptive Security) Framework. The presented schemes are evaluated by simulations and experiments. Besides, the prototype system is developed and tested to show the potential efficiency.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.197-212
• /
• 2002

Transmission Control Protocol (TCP) [1] has been tuned as a reliable transfer protocol for traditional networks comprising wired links and stationary hosts with same link characteristics. TCP assumes that congestion in the network be a primary cause for packet losses and unusual delays. TCP performs welt over such networks adapting to end-to-end delays and congestion losses, by standard congestion control mechanisms, such as slow-start, congestion avoidance, fast retransmit and recovery. However, networks with wireless and other lossy links suffer from significant losses due to bit errors and handoffs. An asymmetry network such as ADSL has different bandwidth for both directions. As a result, TCP's standard mechanisms incur end-to-end performance degradation in various links. In this paper, we analyze the TCP problems in wireless, satellite, and asymmetry links, and measure the new TCP mechanisms that are recommended by IETF Performance Implications of Link Characteristics (PILC) WG[2], by using Network Simulator 2 (NS-2).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1177-1186
• /
• 2003

The multimedia ad hoc wireless network is quite an attractive issue since it offers a flexible solution to enable delivery of multimedia services to mobile end users without fixed backbone networks. However, with the unique design challenges of ad hoc wireless networks, it is a non-trivial issue to provide bounded delay guarantee, with fair share of resources. In this paper, we implemented the delay guaranteed fair queueing (DGFQ) scheme distributively. Through the results of performance evaluation, we can conclude that DGFQ also performs well to control bounded delay in multimedia ad hoc wireless networks.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.192-206
• /
• 2005

Integration of mobile networks and Internet has started with 2.5 generation of mobile cellular networks. Internet traffic is today dominant traffic type worldwide. The hanger for higher data rates needed for data traffic and new IP based services is essential in the development of future wireless networks. In such situation, even 3G with up to 2 Mbit/s has not provided data rates that are used by Internet users with fixed broadband dial-up or through wired local area networks. The solution to provide higher bit rates in wireless access network has been found in wireless LAN although initially it has been developed to extend wired LAN into wireless domain. In this paper, we propose and describe a solution created for interoperability between mobile cellular network and WLAN. The integration between two networks, cellular and WLAN, is performed on the authentication, authorization, and accounting, i.e., AAA side. For that purpose we developed WLAN access controller and WLAN AAA gateway, which provide gateway-type access control as well as charging and billing functionalities for the WLAN service. In the development process of these elements, we have considered current development stadium of all needed network entities and protocols. The provided solution provides cost-effective and easy-to-deploy PLMN-WLAN Internetworking scenario.