• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.300-304
• /
• 2007

Wireless sensor networks represent a new and exciting communication paradigm which could have multiple applications in future wireless communication. Therefore, performance analysis of such a wireless sensor network paradigm is needed in complex wireless channel. Wireless networks could be an important means of providing ubiquitous communication in the future. In this paper, the BER performance of uniform distributed wireless sensor networks is evaluated in non-Gaussian noise channel. Using an analytical approach, the impact of Av. BER performance relating the coherent BPSK system at the end of a multi-hop route versus the spatial density of sensor nodes and impulsive noise parameters A and $\Gamma$ is evaluated.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.344-351
• /
• 2017

Wireless magnet pumps are used in medical applications and are particularly useful as artificial heart ventricular assist devices (VADs). To investigate wireless operation of magnetic pumps, we fabricated three types of magnetic impellers using bonded magnets by blending magnetic powders of SmFeN, NdFeB, and Sr-ferrite. We investigated the magnetic properties of the fabricated magnetic impellers, which are driven by the application of magnetic coupling with an external driving magnet or external coil system, without a driving motor, shaft, or mechanical bearings. The use of wireless magnetic pumps is therefore not complicated by critical issues of size, heat, and vibration, which are very important issues for blood pumps. The magnetic properties of the impellers, such as their rotational speed, driving torque and hydrodynamic performance, determine their wireless driving ranges. We conducted performance evaluations of the impeller's magnetic wireless manipulation, heat, and vibration. In addition, we carried out an animal test to confirm the suitability of the wireless magnetic pumps for use as biventricular assist devices (BiVADs).

• Journal of information and communication convergence engineering
• /
• v.17 no.2
• /
• pp.105-116
• /
• 2019

Recently, there has been an increase in research on wireless sensor networks (WSNs) because they are easy to deploy in applications such as internet-of-things (IoT) and body area networks. However, WSNs have constraints in terms of power, quality-of-service (QoS), computation, and others. To overcome the power constraint issues, wireless energy harvesting has been introduced into WSNs, the application of which has been the focus of many studies. Additionally, to improve system performance in terms of achievable rate, cooperative networks are also being explored in WSNs. We present a review on current research in the area of energy harvesting in WSNs, specifically on the application of simultaneous wireless information and power transfer (SWIPT) in a cooperative sensor network. In addition, we discuss possible future extensions of SWIPT and cooperative networks in WSNs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.623-628
• /
• 2009

The emergence of compact and low-power wireless communication sensors and actuators in the technology supporting the ongoing miniaturization of processing and storage allows for entirely the new kinds of embedded systems. These systems are distributed and deployed in environments where they may have been designed into a particular control method, and are often very dynamic. Collection of devices can communicate to achieve a higher level of coordinated behavior. Wireless sensor nodes deposited in various places provide light, temperature, and activity measurements. Wireless sensor nodes attached to circuits or appliances sense the current or control the usage. Together they form a dynamic and multi-hop routing network connecting each node to more powerful networks and processing resources. Wireless sensor networks are a specific-application and therefore they have to involve both software and hardware. They also use protocols that relate to both applications and the wireless network. Wireless sensor networks are consumer devices supporting multimedia applications such as personal digital assistants, network computers, and mobile communication devices. Wireless sensor networks are becoming an important part of industrial and military applications. The characteristics of modem embedded systems are the capable of communicating adapting the different operating environments. In this paper, We designed and implemented sensor network system which shows through host PC sensing temperature and humidity data transmitted for wireless sensor nodes composed wireless temperature and humidity sensor and designs sensor nodes using embedded system with the intention of studying USN.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.135-140
• /
• 2008

Recently in the Mongolian wireless marketplace, many E-commerce companies have been making considerable investments in the technological development of M-commerce, taking competitive advantage of new business possibilities offered by Internet-based wireless technologies. In the Mongolian wireless marketplace, this new mobile environment opens the door for new and exciting market opportunities in mobile services and applications. In the near future, these companies will be looking toward M-commerce services as a supplemental source of revenue in the mobile marketplace. This paper examines the roles of M-commerce in the consumers' in order to promote the consumers' loyalty in the booming M-commerce. This paper contains theory that focuses on the basic concepts of the M-commerce environment, its wireless network technologies, and its applications infrastructure. Upon searching for references to assist us in establishing a market hypothesis, we discovered that few comprehensive studies on consumer perspective and behavior related to M-commerce services actually exist in the literature. In the area of M-commerce, many companies neglect the consumer perspective, concentrating only on technological factors only when formulating their market strategies. And, due to technological blindness, many companies were not able to succeed in end-user E-commerce services. Given that fact, this paper formulates a consumer-centric research model. In order to prove the research model, we chose the survey method which allows for the collection of large amounts of data from a sizeable population in a highly economical way. Through the survey, this paper defines consumer's attitudes towards M-commerce services by identifying potential Business-to-Commerce(B2C) applications and its primary target groups in terms of gender and age, and by investigating whether consumers recognize the value proposition of M-commerce applications and services. As shown in the data analysis and results, this research concludes that M-commerce development in Mongolia is still at its infancy, and that the implementation of M-commerce depends not only on technological progress, but also on consumer attitudes and their willingness to adopt M-commerce services. As well, other complex cross-cultural factors-socially, economically, culturally, et cetera-enter strongly into the equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.233-239
• /
• 2015

The demand of remote control and monitoring for efficiency and applications of LED streetlight is increasing continuously because the demand of LED streetlight was increase last few years. Existing street light remote control system is wired using a power line network. The wireless connection exists, but due to its low data transmission rate, it cannot support specialized applications. It can only support simple control and monitoring. In this paper, we propose a system that uses a IEEE 802.11s wireless mesh network based on WLAN, as a backbone network for remote control and monitoring of the LED street lights along with other specialized applications. Using the wireless mesh network for remote control and monitoring the LED street lights, the same can be used to act like a public Wi-Fi access point. We have designed Wi-Fi integrated LED streetlight controller and implemented our system. We evaluated the performance of our system on a real test bed. Our proposed system is expected to perform the role of a U-city infrastructure by utilizing the wireless mesh network.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.61-70
• /
• 2013

The increasing number of mobile users and the popularity of real-time applications make wired-wireless integrated network extremely attractive. In this case, quality of service (QoS) adaptability is particularly important since some important features of the integrated network call for QoS adaptability, such as mobility, bursty applications and so on. Traditional QoS schemes include integrated service (IntServ) and differentiated service (DiffSev) as well as their variants. However, they are not able to balance well between scalability and QoS granularity. For example, IntServ faces the scalability problem, while DiffServ can only provide coarse granular QoS. In addition, they are also unable to efficiently support QoS adaptability. Therefore, a per-packet differentiated queueing service (DQS) was proposed. DQS was originally proposed to balance between scalability and QoS granularity in wired networks and then extended to wireless networks. This paper mainly discusses how to use DQS to support QoS adaptability in wired-wireless integrated networks. To this end, we propose a scheme to determine dynamic delay bounds, which is the key step to implement DQS to support QoS adaptability. Simulation studies along with some discussions are further conducted to investigate the QoS adaptability of the proposed scheme, especially in terms of its support of QoS adaptability to mobility and to bursty real-time applications.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.15-20
• /
• 2016

Recently, the u-IT applications for plants and livestock become larger and control of livestock farm environment has been used important in the field of industry. We implemented wireless sensor networks and farm environment automatic control system for applying to the breeding barn environment by calculating the THI index. First, we gathered environmental information like livestock object temperature, heart rate and momentum. And we also collected the farm environment data including temperature, humidity and illuminance for calculating the THI index. Then we provide accurate control action roof open and electric fan in of intelligent farm to keep the best state automatically by using collected data. We believed this technology can improve industrial competitiveness through the u-IT based smart integrated management system introduction for industry aversion and dairy industries labor shortages due to hard work and old ageing.

• International Journal of Contents
• /
• v.3 no.4
• /
• pp.1-7
• /
• 2007

There has been increased interest in wireless sensors in the last few years. This paper provides insight into the properties that make these sensors so attractive, specifically considering their efficiency, data reliability, and the ability to verify the data generated. Some advantages a wireless network presents over traditional information sensing are discussed as well. The paper considers how the environmental field can benefit from using these networks. Some of the possible challenges this industry will face in adopting this new method of data sampling and collection are also considered. A project we conducted raised concern over measures needed for the integrity of the communication system to be maintained, thus ensuring the integrity of the data being collected. From results of an experimental project conducted in York University, the reliability and usefulness of a sensor network is discussed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.185-194
• /
• 2010

In this paper, we propose an application layer-based vertical handover management protocol, called multihoming RTP (mhRTP), for real-time applications with seamless mobility across heterogeneous wireless access networks. The proposed multi-homing RTP provides a soft handover by utilizing multiple available wireless access network interfaces simultaneously. The newly available path is dynamically added to the ongoing session by the mhRTP session manager. Also the decision making of QoS-improving or QoS-guaranteed handover is possible based on the estimation of available bandwidth in each candidate network. The performances of the proposed mhRTP have been analyzed through a series of simulations on OPNET network simulator. From the performance analysis, we confirmed that the proposed mhRTP can provide QoS-guaranteed vertical handover with efficient session managements.