• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.6 s.336
• /
• pp.67-74
• /
• 2005

Crypto-systems have difficulties in designing hardware due to the various standards. We propose a programmable and configurable architecture for cryptography coprocessors to accommodate various crypto-systems. The proposed architecture has a 32 bit I/O interface and internal bus width, and consists of a programmable finite field arithmetic unit, an input/output unit, a register file, and a control unit. The crypto-system is determined by the micro-codes in memory of the control unit, and is configured by programming the micro-codes. The coprocessor has a modular structure so that the arithmetic unit can be replaced if a substitute has an appropriate 32 bit I/O interface. It can be used in many crypto-systems by re-programming the micro-codes for corresponding crypto-system or by replacing operation units. We implement an elliptic curve crypto-processor using the proposed architecture and compare it with other crypto-processors

• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.363-371
• /
• 2017

Purpose: The purpose of this study was to investigate the feasibility of regenerative therapy with a collagenated bone graft and resorbable membrane in intrabony defects, and to evaluate the effects of the novel extracellular matrix (ECM)-based membrane clinically and radiologically. Methods: Periodontal tissue regeneration procedure was performed using an ECM-based resorbable membrane in combination with a collagenated bovine bone graft in intrabony defects around the teeth and implants. A novel extracellular matrix membrane (NEM) and a widely-used membrane (WEM) were randomly applied to the test group and the control group, respectively. Cone-beam computed tomography images were obtained on the day of surgery and 6 months after the procedure. Alginate impressions were taken and plaster models were made 1 week and 6 months postoperatively. Results: The quantity of bone tissue, the dimensional changes of the surgically treated intrabony defects, and the changes in width and height below the grafted bone substitutes showed no significant difference between the test and control groups at the 6-month examination. Conclusions: The use of NEM for periodontal regeneration with a collagenated bovine bone graft showed similar clinical and radiologic results to those obtained using WEM.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.12
• /
• pp.4905-4908
• /
• 2015

Background: Platelets are blood elements thought to play a role in the immune system and therefore tumor development and metastasis. Platelet activation parameters such as mean platelet volume (MPV), platelet distribution width (PDW), and plateletcrit (PCT) can be easily evaluated with the whole blood count and have been studied as markers of systemic inflammatory responses in various cancer types. Our aim in this study was to evaluate the correlation between endometrial pathologies and MPV, PDW and PCT. Materials and Methods: A total of 194 patients who presented to our clinic with abnormal vaginal bleeding were included in our study. The patients were divided into 3 groups (endometrial hyperplasia, endometrial cancer, control) according to their pathology results. The groups were compared for MPV, PDW, and PCT values obtained from the blood samples taken on endometrial biopsy day. Results: The endometrial cancer patients were the oldest group (p=0.04). There was no significant difference between the three groups in terms of white blood cell count (WBC), platelet count (PC), and hemoglobin (Hb) level. The highest MPV (p<0.001), PDW (p=0.002), and PCT (p<0.001) levels were in the endometrial cancer group, and the lowest levels were in the control group. Conclusions: The easy evaluation of platelet parameters in patients who are suspected of having endometrial pathology is a significant advantage. We found MPV, PDW, and PCT to be correlated with the severity of endometrial pathology with the highest values in endometrial cancer. Studies to be conducted together with different laboratory parameters will further help evaluate the diagnosis and severity of endometrial cancer and precursor lesions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.5-13
• /
• 2019

This study was conducted to investigate the application effects of dried food waste powder (FWP) and mixtures of FWP and organic fertilizer (MFOs) on the growth of lettuce and Chinese cabbage. The physicochemical properties of FWP and MFOs were analyzed. As FWPs containing 3.11% NaCl was applied at 250 kg, 500 kg and 1,000 kg per 10a, growth factors of lettuce and Chinese cabbage, such as a number of leaf, leaf length, leaf width, and dry weight were decreased than those of control appling organic fertilizer. The higher the FWP ratio in the MFOs, the lower the concentrations of N and P₂O₅ in the MFOs, while the higher the concentration of NaCl. As compared to dry weight of control after treating MFOs, lettuce were not significant in MFOs treatments containing 10~30% FWP, and Chinese cabbage in MFOs treatment containing 10% FWP.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.897-900
• /
• 2007

This paper presents a study on the DSP controller and IGBT inverter driver design for the power-by-wire(PBW) system using BLDC servo motor. This BLDC servo motor system was realized with DSP(Digital Signal Processor) and IGBT inveter module. The PBW system needs speed control of servo motor for linear thrust action. This paper implements a servo controller with vector control and min-max PWM technique. As CPU of controller, TMS320F2812 DSP was adopted because it has PWM(Pulse Width Modulation) waveform generator, A/D(Analog to Digital) converter, SPI( Serial Peripheral Interface) port and many input/output port etc.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.167-171
• /
• 2004

Objective of this research was to investigate the effect of irrigation concentration on the growth and fruit quality of sweet pepper(Capsicum annuum L.) in fertigation. The sweet pepper was grown for 210 days with irrigation concentration of EC 0.5, 1.0, 1.5, 2.0, and 3.0 dSㆍ$m^{-1 }$ in fertigation nutrient solution developed by European Vegetable R & D Center, Belgium. The net $CO_2$ assimilation and transpiration rate were the highest in the treatment of 2.0 dSㆍ$m^{-1 }$. The pH in the soil was range of 5.63 ～6.03, the EC increased as the irrigation concentration was getting higher. The SPAD value also increased as the irrigation concentration was getting higher, N, P, K, Mg except Ca were highest in the treatment of EC 2.0 dSㆍ$m^{-1 }$. The growth was good in the treatment of EC 2.0 dSㆍm$m^{-1 }$. The fruit length, width, firmness, and pericarp thickness had no statistical differences among treatments, the fruit fresh weight and dry weight were good in the treatment of EC 2.0 dSㆍ$m^{-1 }$ the yield was good in the treatment of EC 1.5 dSㆍ$m^{-1 }$ and EC 2.0 dSㆍ$m^{-1 }$ The sugar contents was the highest in the treatment of EC 2.0 dSㆍ$m^{-1 }$ with 9.0$^{\circ}$Brix. In conclusion, the optimal irrigation concentration for sweet pepper fertigation was EC 2.0 dSㆍm$^{-1}$ .

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.203-205
• /
• 2006

This paper presents a novel soft-switching PWM utility frequency AC to high frequency AC power conversion circuit incorporating boost-half-bridge inverter topology, which is more suitable and acceptable for cost effective consumer induction heating applications. The operating principle and the operation modes are presented using the switching mode and the operating voltage and current waveforms. The performances of this high-frequency inverter using the latest IGBTs are illustrated, which includes high frequency power regulation and actual efficiency characteristics based on zero voltage soft switching (ZVS) operation ranges and the power dissipation as compared with those of the previously developed high-frequency inverter. In addition, a dual mode control scheme of this high frequency inverter based on asymmetrical pulse width modulation (PWM) and pulse density modulation (PDM) control scheme is discussed in this paper in order to extend the soft switching operation ranges and to improve the power conversion efficiency at the low power settings. The power converter practical effectiveness is substantially proved based on experimental results from practical design example.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1700-1706
• /
• 2014

In this paper, a step down converter for LED backlight of mobile application has been proposed. The converter which is operated with 4 MHz high switching frequency is capable of reducing mounting area of passive devices consists of a power stage and a control block. Circuit elements of the power stage are inductor, output capacitor, MOS transistors and feedback resistors. The control block consists of pulse width modulator, error amplifier and oscillator etc. Proposed step down converter has been designed and verified using a $0.35{\mu}m$ 1-poly 4-metal BCD process technology. Simulation results show that the output voltage is 1.8 V in 3.7 V input voltage, output current 100 mA which is larger than 25 ~ 50 mA in conventional 500 KHz driven converter when the duty ratio is 0.4.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.333-342
• /
• 2009

Three-level Diode Clamped Multilevel Inverter, generally known as Neutral-Point-Clamped (NPC) Inverter, has an inherent problem causing Neutral Point (NP) potential variation. Until now, in many literatures NP potential problem has been investigated and lots of solutions have also been proposed. However, under fault and fault tolerant control, distinctive feature for NP potential variation problem was rarely published from the standpoint of reliability. In this paper, NP potential is analytically investigated both normal and faulty conditions under carrier based PWM. Subsequently, relation between fault detection time and size of capacitor is analyzed. This information is explored by simulation and experiment results, which contribute to enhance the reliability of inverter system.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1060-1062
• /
• 1999

Pulsed Nd:YAG laser is used widely for materials processing and instrumentation. It is very important to control the laser energy density in materials processing by a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, the alternating charge-discharge system was designed to adjust a pulse repetition rate. And the parallel mesh is added to increase laser output power. This system is controlled by one chip microprocessor and allows to replace an expensive condenser for high frequency to a cheap condenser for low frequency. In addition, we have investigated the current pulse shape of flashlamp and the operating characteristics of a pulsed Nd:YAG laser. As a result, it is found that the laser output of the power supply using the parallel mesh and the alternating charge-discharge system is not less than that of typical power supply. As the pulse repetition rate rises from 10pps to 110pps by the step of 20pps at 1000V and 1200V, it is found that the laser efficiency decreases but the laser output power increases about 5W at each step.