• 한국염색가공학회지
• /
• 제17권3호
• /
• pp.1-7
• /
• 2005

Cationic dyeable polyester(CDP) was produced through melt blending of cationic chips having $2mol\%$ of sodium salt of dimethyl ester of 5-sulfoisophthalic acid(DMS salt) and normal polyester chips in different proportions to obtain yarns having varying amount of comonomer in the fiber. The modified polyesters showed increased moisture regain, decreased viscosity, lower softening point and improved antistatic characteristics, according to the amount of modifier. In dyeing at $100^{\circ}C$ the dyeing rate of cationic dyes with CDP fiber increased slowly than that of disperse dyes. In dyeing at $120^{\circ}C$ cationic dyes reached to equilibrium at 30min and disperse dyes at 10min. Cationic dyes in dyeing of CDP fabric have a better wash fastness compared with disperse dyes, also rubbing fastness of cationic dyes is better than that of disperse dyes. The light fastness of CDP fabric for cationic and disperse dyes is not good. The fastness of 75d/36f CDP fabric is higher than 75d/72f fabric. Solvent wicking fastness of CDP with cationic dyes is better than that of disperse dyes.

• 감성과학
• /
• 제17권4호
• /
• pp.71-78
• /
• 2014

PET 중공필라멘트 복합 DTY(Draw Textured Yarns)와 ATY(Air-jet Textured Yarns)는 경량의 스포츠 의류를 포함한 고감성 의류용으로 많이 사용되고 있다. 본 연구는 중공섬유 복합 DTY와 ATY 복합사 직물의 수분 및 열이동에 관계되는 쾌적특성에 중공 복합사 및 직물의 구조 특성이 어떠한 영향을 미치는 가에 대한 분석이다. 기공의 크기가 큰 중공 복합 직물의 흡수성이 우수하였고 커버팩터는 영향을 미치지 않았다. 또한 ATY사 직물이 DTY사 직물에 비해 흡수성이 우수하였다. 반면, 건조특성은 기공 사이즈가 미세한 직물이 기공사이즈가 큰 직물보다 건조시간이 짧았으며 낮은 커버팩터와 기공 사이즈가 작은 하이멀티사 직물이 중공 복합직물에 비해 건조 특성이 우수하였다. 직물의 기공 사이즈는 공기투과도와 열전도도 특성에 가장 중요한 인자였다. 직물의 큰 기공도는 중공 복합 직물의 기공도와 열전도도에 비선형적인 반비례 상관관계를 나타냈다.

• 한국의류산업학회지
• /
• 제17권6호
• /
• pp.1020-1029
• /
• 2015

This paper investigated the wearing performance of knitted fabrics made of air vortex yarns using PTT/tencel/cotton fibres in comparison with ring and compact yarns for emotional garment. Wicking property of knitted fabric made of MVS yarns was worse than those by ring and compact yarns, however, drying property of knitted fabric made of MVS yarns was better than those by ring and compact yarns, which was explained as more water vapor transport due to larger openness between fibres in the MVS yarns than those in the ring and compact yarns. Thermal conductivity of knitted fabric made of MVS was lower than those of ring and compact yarns and maximum heat flow(Q_max) at the transient state of MVS knitted fabric was lower than those of ring and compact yarns, which may be attributed to MVS yarn structure that has parallel fibres in the core part of the yarn and fasciated fibre bundles on the sheath part with roughness on the yarn surface. However, pilling of MVS knitted fabric was better than those by ring and compact yarns, which was caused by less and shorter hairy fibres protruded from MVS yarn surface than those of ring and compact yarns. It was observed that tactile hand of MVS yarn knitted fabrics was stiffer than those of ring and compact yarns knitted fabrics. It was explained by low extensibility and compressibility and high bending and shear rigidities of the MVS yarn knitted fabrics, which resulted in bad wearing performance of MVS knitted fabric.

• 한국의류학회지
• /
• 제25권1호
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-2
• /
• pp.236.1-236.1
• /
• 2003

Evaluation of solid surface properties is very important for formulation of solid dosage form, specially insoluble drugs. The contact angle of insoluble drugs was measured by the penetration rate into powder bed using Washburn equation and wicking method. From the measured contact angle data, the surface free energy value of pharmaceutical powders ${\gamma}$s was divided and analysized into the polar component, ${\gamma}$s$\^$p/ and the dispersion component, ${\gamma}$s$\^$d/. Furthermore, the data was interpreted for acid part, ${\gamma}$s$\^$+/ and base part, ${\gamma}$s$\^$$\square$/ of surface free energy. (omitted)

• 대한가정학회지
• /
• 제26권4호
• /
• pp.1-13
• /
• 1988

The purpose of this study is to investigate water and after vapor transport characteristics of underwear fabrics. Experimental materials were cotton woven fabric and cotton knitted fabric, nylon tricot (untreated and hydrophilic finished) and cotton/polyester/cotton triple layer. Cotton knitted fabric have three types of knit structure (interlock, rib, plain stitch) and knit with either 38's or 60's combed yarn. And cotton woven fabric have plain weave with 60's combed yarn. As experimental methods, vapor cup test, dynamic method, vertical wicking test and transplanar uptake test were used. The results are as follows. 1) In cotton specimens, the order of water vapor transpiration (wvt) was plain > rib > interlock in the same yarn diameter. The knit fabric of thinner yarn showed the better wvt among the same knit structure. 2) In cotton specimens, the order of water absorbency was interlock > rib > plain in the same yarn diameter. the knit fabric of thicker yarn showed the better absorbency among the same knit structure. 3) When knit fabric (60's plain) is compared with woven fabric 960's plain), knit fabric showed faster rate of wvt, more amount of uptake and slower rate of water uptake than woven fabric did. 4) When compared untreated nylon with hydrophilic finished nylon, hydrophilic finished nylon showed much more water absorbency than untreated nylon did, but showed same rate of wvt. 5) The water transport characteristics of triple layer underwear fabric showed that the thinner and the lighter one, the better wvt and absorbency did.

• 유변학
• /
• 제11권1호
• /
• pp.34-43
• /
• 1999

수지 이동 성형공정에서 섬유직조가 수지에 의해 함침될 때 발생하는 기공 또는 나쁜 젖음성은 최종 성형품의 물성 저하에 심각한 영향을 미치게 된다. 본 연구에서는 수지이동 성형공정에서의 이러한 문제점을 극복하기 위한 기초 데이터를 제공하기 위하여, 실란 커플링제를 사용한 섬유의 표면 개질이 수지의 유동특성과 수지와 섬유 사이의 젖음성 및 기공함량에 미치는 영향을 조사하였다. 빔 형태의 금형을 대상으로 에폭시 수지와 평직형태의 유리섬유를 사용하여 미시적인 유동가시화 실험 및 경화실험을 수행하였다. 섬유의 표면을 개질함으로써 수지와 섬유 사이의 동적 접촉각이 감소하고 위킹속도는 증가한 것으로 나타났으며, 이러한 결과로부터 본 연구에서 사용한 화학적 표면개질이 섬유직조의 젖음성 및 미시적 흐름 거동을 향상시킬 수 있는 중요한 요인임을 확인할 수 있었다. 또한 수지의 높은 온도와 낮은 침투 속도는 동적 접촉각을 감소시키기 위한 중요한 가공 변수임을 알 수 있었다. 그러나 섬유직조의 투과성은 표면을 개질하였을 경우 오히려 감소하였는데, 이는 젖음성의 향상으로 인하여 수지와 섬유 사이의 접촉시간의 증가에 기인하는 것으로 생각된다. 마지막으로 경화공정을 통해 제조된 시편의 기공 함량을 측정 비교한 결과, 표면개질은 수지이동 성형공정에서의 기공형성에도 중요한 변수로 작용하여, 수지와 섬유 사이의 젖음성을 향상시키고, 최종 성형품의 기공함량을 감소시킴을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.823-828
• /
• 1994

Dispersion condition of Si3N4 powder in molten wax was established by comparing relative viscosity of mixture with 20 vol% solids loading, while the evaluation of compression-molded sample was demonstrated as an effective method for developing a binder system for injection molding. The best dispersion of Si3N4 powder in molten wax was achieved when Si3N4 powder was treated with 5% stearic acid, and the critical powder volume fraction was determined to be about 0.51 from density measurement of compression-molded samples. Samples containing polar secondary binder showed markedly improved green strength, higher thermal expansion and increased wicking rate in the early stage.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.61-71
• /
• 2006

This paper addresses the factors hindering the image quality of lines in inkjet printed on polyester fabric as printing media. Lines were printed onto different types of polyester fabrics in warp and filling directions. Line image quality including line width, edge blurriness, and edge raggedness was assessed. The effect of capillary wicking on line image quality of printed spun polyester fabric is discussed. The factors on the image quality include printing position(top of the yam or between the yarn), printing direction(warp or filling), yarn structures(filament or spun), thread size(yam or fiber), finishing, and ink properties(evaporation rate). More than 30% differences in image quality results were observed by changing the printing location on the spun polyester fabric. The best results of the image quality were obtained with the printed plain and spun polyester fabrics. The fiber sizes may affect capillary size; therefore, the image quality can be dissimilar. Types of finishing materials and inks greatly improve the line image quality on spun polyester fabrics.

• 한국분말재료학회지
• /
• 제8권2호
• /
• pp.91-97
• /
• 2001

The conventional debinding process in metal injection molding is very long time-consuming and unfriendly environmental method. Especially, in such a case of injection molded parts from hard and fine metal powder, such as WC-Co, an extremely long period of time is necessary in the conventional slow binder removal process. On the other hand, supercritical debinding is thought to be the effective method which is appropriate to eliminate the aforementioned inconvenience in the prior art. The supercritical fluid has high diffusivity and density, it can penetrate quickly into the inside of the green metal bodies, and extract the binder. In this paper, super-critical debinding is compared with wicking debinding process. Wax-based binder system is used in this study. The binder removal rate in supercritical $CO_2$ have been measured at $65^{\circ}C$, 75$^{\circ}C$ in the pressure range from 20 MPa to 28 MPa. Pores and cracks in silver bodies after sintering were observed using SEM When the super-critical $CO_2$ debinding was carried out at 75$^{\circ}C$, almost all the wax (about 70 wt% of binder) was removed in 2 hours under 28 MPa and 2.5 hours under 25 MPa.