• Fashion & Textile Research Journal
• /
• v.23 no.5
• /
• pp.645-654
• /
• 2021

This study aimed to visually compare the implementation of digital virtual fabrics for stretch fabrics mainly used in clothing that closely touch the body, using CLO. A digital fabric was used in CLO after measuring the weight, thickness, bending, and tensile force of five adhering clothing fabrics using a CLO fabric kit. The visual similarity of draftability was compared by measuring the area of the bending angle and the shape of the wrinkles of the real and digital fabric. A comparison of the bending angles showed that Fabric A was -0.75° and Fabric D was -2.5°, showing slightly lower drape properties than the real fabric. Meanwhile, Fabric B was 2.75°, Fabric C was 2.13°, and Fabric E was 1.375°, showing slightly higher drape properties in the vertical direction than the real fabric. Comparing the widths of the drape shapes, Fabric A was 0.77%, Fabric B was 1.27%, Fabric C was 0.06%, and Fabric E was 1.48%, which showed a slight difference. Fabric D showed a difference of 3.17% and was implemented where the digital fabric spread a little wider. As a result, the stretch fabric was visually expressed similarly to the real fabric as a whole in CLO. For 3D virtual clothing technology to be used widely in the close clothing industry in the future, more research on real clothing is needed.

• BioChip Journal
• /
• v.12 no.4
• /
• pp.294-303
• /
• 2018

Shear stress occurs in flowing liquids, especially at the interface of a flowing liquid and a stationary solid phase. Thus, it occurs inside the artery system of the human body, where it is responsible for a number of biological functions. The shear stress level generally remains less than $70dyne/cm^2$ in the whole circulatory system, but in the stenotic arteries, which are constricted by 95%, a shear stress greater than $1,000dyne/cm^2$ can be reached. Methods of researching the effects of shear stress on cells are of large interest to understand these processes. Here, we show the development of a microfluidic device for generating shear stress gradients. The performance of the shear stress gradient generator was theoretically simulated prior to experiments. Through simple manipulations of the liquid flow, the shape and magnitude of the shear stress gradients can be manipulated. Our microfluidic device consisted of five portions divided by arrays of micropillars. The generated shear stress gradient has five distinct levels at 8.38, 6.55, 4.42, 2.97, and $2.24dyne/cm^2$. Thereafter, an application of the microfluidic device was demonstrated testing the effect of shear stress on human umbilical vein endothelial cells.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.25-36
• /
• 2018

Drip irrigation system is a low energy cost method which can efficiently save and supply water by dropping water slowly on the crop's root zone during crop growth. In the drip irrigation system, disk filters take an important role to physically remove impurity (inorganic and suspended organic) particles present in agricultural water which can cause emitter clogging. For the purpose, both top-and-bottom surfaces of the disk are grooved in micron size flowing from outside to inside. However, many congested flow paths in disk filter media incur higher head loss of inflow water resulting in relatively decreasing velocities depending on operation time than sand and mesh filters. Therefore, it is important to optimize the structure of disk filter in micro irrigation system. The head loss of disk filter media takes also charge of more than 60 % of total head loss in whole disk filter. This study is to find the appropriate cross-sectional shape of the disk groove to minimize the head loss by executing the experiment. The experiment used three disk filters that have similar filter body but have a half-elliptic and two kinds of triangular cross sections. The experimental results showed that the disk filter with half-elliptic cross sections of disk grooves have less head loss than the disk filter with regular triangular one.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.120-132
• /
• 1998

This stusy was to investigate the marginal fitness of porcelain-fused-to- metal crown after succesive firing cycle. Main variables were the degree of marginal curvature of labiocervical margin and the type of alloy. The exaggerated marginal curvature(EMC) was created by additional reduction at the faciocervical wall of the normallized marginal curvature (NMC)-typed ivorine tooth by using milling machine. The difference in the shape was the mid facial margin was placed 2mm apical to cemento- enamel junction in labial surface. Three types of alloy were high noble, noble, and base metal alloy. Test specimens were divided into 8 groups and each group had 8 specimens. Sixty four ceramometal crowns were made totally. Measurement stages were following degassing, opaquing. body porcelain firing, and glazing, and measuring sites were 4. (midmesial, midfacial, middistal, and midlingual). Digital, travelling measuring microscope (0.5 um precision, Olympus. Japan) was used under ${\times}250$ magnification. Within the limitation of this investigation, it was concluded as belows: 1. The pattern of marginal distortion was varied. Degassing stage was not a specific, causative stage that induce most of total marginal distortion during whole procedure fabricating a ceramometal crown. Body firing stage induced discrepancy relatively more than other firing stages. 2. The specimens that were Ni-based alloy and had EMC were distorted persistently following successive fabricating procedures. But marginal openings were decreased after glazing. 3. The release of metal grinding-induced stress was presumed as a cause that induce marginal distortion. 4. The amount of discrepancies of the labial and lingual margins were greater than that of the mesial and distal margin in the specimen that had EMC. 5. Silver-plated die was not enough to resist abrasion during repeated seating of metal copings on the die-holding device.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.111-122
• /
• 1985

The present study was performed to observe the ultrastructure of the integument of adult Paragonimus westermani. Dogs experimentally infected with 60 metacercariae of F. westermani were autopsied 4 months after the infection. Adult p. westermani were extracted from the dogs and the fine structure was studied by means of scanning and transmission electron microscope. The findings are as follows: 1. Scanning electron microscopic findings showed that the spines and the papillae are distributed at whole body surface but the well developed spines or papaillae are shown around the oral sucker and ventral sucker. 2. At the end of the body, excretory pore was found, the shape was irregular. 3. Transmission electron microscopic findings showed that plasma membrane, tegument, basal lamina, connective tissue, circular muscle layer, longitudinal muscle layer. nerve axon and tegumental cell were observed. 4. In higher magnification, plasma membrance and bar-shaped granules were found at the outer surface of the tegument.

• Journal of the Korean Home Economics Association
• /
• v.19 no.3
• /
• pp.21-32
• /
• 1981

Clothing must have the individual beauty and the function that one can do one's body movement freely. therefore, from the human engineering view point, the exact measurement of the human body and the analysis of it's results must be applied to clothing because the arm works most. In this study, the skin surface of arm was investigated by shell made of Alginate of each movement. And by sometic method the rate of expansion and contraction of each section, inter-relation among the bust girth, axillary arm girth and scye girth and between the shoulder length right and the under axilla waist length were calculate4d. With these results, cap height, breadth of a sleeve and arm hole girth of existing sleeve pattern have been compared and analysed. The results are as follows; 1) According to the developmental figures of shell, the whole area change was small but that of shape was remarkable in M 4, 9, 13. The change of the Block 1 was particular. 2) Over arm length was contracted in all movements except M6 and under arm length expanded. The changes of sections a, b, c are large, while those of sections d, e are small. 3) In terms of latitudes, change of fore-arm region was small. The rate of scye girth varied from 14.3% of M13 to-5.6% of M2. The breadth of a sleeve expanded in all movements, and especially the front region expanded more than the back. 4) The relation between the shoulder length right and under axilla waist length, in all occasions, was contracted mutually, and one contracted, the other expanded. Therefore, in clothing construction when we consider the function of the arm it is better to widen the arm hole and the breadth of a sleeve at the same time than no widen the shoulder length by lowering the upper part of the upper side seam line.

• Journal of the Korean Society of Costume
• /
• v.60 no.6
• /
• pp.1-10
• /
• 2010

The cultures and traditions of Asia has the roots so deep and it is the origin of inspiration. Therefore, it is easy to find a different inspiration when designing, expecially for Western designers who are seeking European tradition and its comparison. The most distinctive feature of the Asian look is non-structural and has no clear form close to the structure of the body or mathematical ratio, but is steric with 2-Dimensional planed textiles, and has a flexible, non-structural formative characteristic related to the movable body. This is base on the vision of the universe that regards the parts as the whole. From this research, generally studying about the Asian look and its non-structural formative characteristics. The study looked closely into the aesthetic value of non-structural formative characteristics formation, with basis on the large dress regulation system of the western reasoning and rationalism and mechanism. At first, my study pointed on the dressing functionalism or Neo-classism considering emotions, Anti-Western aspect observing surrealism dressing and expressionism dressing. Second, with men and women showing similar outer shape without the equivalent element such from wearing a corset, the sexism is abolished. Finally, the designers’ inner intention of art is being delivered, from the aspect that the expression of art, size and no waste of fabric shows effort of communicating with the world, giving value to the possibility of continuance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1129-1136
• /
• 2010

Damper springs in a drive-line absorb the impulsive torque generated when a lock-up clutch is connected directly, instead of via a fluid coupling. Design optimization and finite element analysis were performed to improve the shock- and vibration-absorption capacity of the lock-up clutch. For this purpose, a multi-body dynamics model was developed by including the main parts of a vehicle, such as an engine with a clutch, a transmission, drive shafts and wheels, and a whole mass of a vehicle. The spring constants were selected so that resonance of a system could be avoided. Damper springs were optimized on the basis of the spring constants, impulsive torques, compressed angles, spring counts, fatigue constraints, etc. Topology optimization was performed for three plates with the damper springs. The compliance was set up as an objective function, and volume fraction was fixed below 0.3. A new shape for the plates was proposed on the basis of the topology result.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.157-173
• /
• 2001

In fashion, there are various cultural aspects that exist in complexity, where according to the era, even fashion items newly develop and prevail into various designs in the organic function with reality of related cultural phenomenon and aesthetic aim. Among the fashion items, the shoe is historically considered as the shield from lust and also the provision of praise against the most emotional incitement. Mankind has started wearing shoes out of the functional purpose of protection since the ancient Egyptian times. Thereafter humankind has been creating shoes artistically in respect to shape, color, and quality of material, etc, as an expression of aesthetical awareness and introspective desire for beauty. As modern fashion increasingly regards the total fashion image much more important than each items consisting the whole outfit, the role of shoe became essential more than ever. Contrary to its relative importance, little academic attention was given to this area yet, while prestigious museums and galleries in Europe and the USA have held exhibitions of shoes in view of both historical and artistic aspects. This study aims to make a historical inquiry of western shoes. through which their aesthetic values can be drawn. Literature on this subject including aesthetics, history of costume and arts were referred. Fashion magazines and catalogues were investigated for additional information. The process and results of this study are meant to be a suggestion not only to further studies but also to artistic and creative shoe design. Originated for the functional purpose, shoes have evolved in various shapes with different meanings attached to it. When the technological development made the satisfaction for functional needs possible, the intrinsic attribute, the aesthetic value was pursued. The historical contemplations of shoes from Egyptian times to the 1990's led to the results that the intrinsic aesthetic value of shoes can be summarized as follows: 1) protection and extension of body, 2) need for decoration, 3) erotic expression, 4) symbol of dignity and class, 5) fashion.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.3
• /
• pp.233-240
• /
• 1997

Neurons in the nucleus raphe magnus are involved in descending modulation of nociceptive transmission. In this study, we attempted to investigate electrophysiological properties of the NRM neurons dissociated from the postnatal rat medulla. The NRM neurons in the coronal slices of and the dissociated neurons from the postnatal rat medullae were immunohistochemically identified using antibody against serotonin. Relatively small number of neurons were positively stained in both preparations. The positively stained neurons displayed large cell body with double or multiple neurites. Using whole-cell patch clamp configuration ionic currents were recorded from the dissociated NRM-like neurons selected by criteria such as size and shape of cell body and cell population. Two types, high- and low-threshold, of voltage-dependent calcium currents were recorded from the dissociated NRM-like neurons. Some neurons displayed both types of calcium currents, whereas others displayed only high-threshold calcium current. Voltage-dependent potassium currents were also recorded from the dissociated NRM neurons. Some neurons displayed both transient outward and delayed rectifier currents but others showed only delayed rectifier current. These results suggest that there are at least two types of calcium currents and two types of potassium currents in the dissociated NRM neurons.