• Journal of the Korean Ceramic Society
• /
• v.55 no.5
• /
• pp.480-491
• /
• 2018

Calcium phosphates (CaP) were prepared by a wet chemical method. Micro-crystalline dicalcium phosphate (DCPD) was precipitated at $37^{\circ}C$ and pH 5.0 using $Ca(OH)_2$ and $H_3PO_4$. The precipitated DCPD solution was kept at $37^{\circ}C$ for 96 h. Artificial bone cement was composed of DCPD, $Ca(H_2PO_4)_2{\cdot}H_2O$ (MCPM), and $CaSO_4{\cdot}1/2H_2O$, $H_2O$ and aqueous poly-phosphoric acid solution. The wet prepared CaP powder was used as a matrix for the bone cement recipe. With the addition of aqueous poly-phosphoric acid, the cement hardening reaction was started and the CaP bone cement blocks were fabricated for the mechanical strength measurement. For the tested blocks, the mechanical strength was measured using a universal testing machine, and the microstructure phase analysis was done by field emission scanning electron microscopy and X-ray diffraction. The cement hardening reaction occurred through the decomposition and recrystallization of MCPM and $CaSO_4{\cdot}1/2H_2O$ added on the surface of the wet prepared CaP, and this resulted in grain growth in the bone cement block.

• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.539-549
• /
• 2017

In this paper, the wave propagation in an infinite poroelastic cylindrical bone with cavity is studied. An exact closed form solution is presented by employing an analytical procedure. The frequency equation for poroelastic bone is obtained when the boundaries are stress free and is examined numerically. The magnitude of the frequency equation, wave velocity and attenuation coefficient are calculated for poroelastic bone for different values of magnetic field, density and frequency. In wet bone little frequency dispersion was observed, in contrast to the results of earlier studies. Such a model would in particular be useful in large-scale parametric studies of bone mechanical response. Comparison was made with the results obtained in the presence and absence of magnetic field. The results indicate that the effect of magnetic field, density and frequency on wave propagation in poroelastic bone are very pronounced.

• Journal of Periodontal and Implant Science
• /
• v.39 no.sup2
• /
• pp.253-259
• /
• 2009

Purpose: This study was aimed to evaluate the effect of implant drilling speed on the composition of particle size of collected bone debris. Methods: $Br{\aa}nemark$ $System^{(R)}$ drills were used to collect bone debris from 10 drilling holes (1 unit) at 1,500 rpm (Group A) and 800 rpm (Group B) in bovine mandible. After separating particles by size into > 500 ${\mu}m$, between 250 ${\mu}m$ and 500 ${\mu}m$, and < 250 ${\mu}m$ fractions, particle wet volume, dry volume, and weight were measured and the proportion of 3 fractions of bone debris to total wet volume, dry volume and weight was calculated as wet volume % , dry volume % and weight %. Results: No significant differences were found between Group A and B in wet volume, dry volume, and weight. However, of >500 ${\mu}m$ fractions, Group B had significantly higher wet volume %(P = 0.0059) and dry volume %(P = 0.0272) than in Group A. Conclusions: The drilling speed influenced the composition of particle size in collected drilling bone debris. The drilling in 800 rpm produced the more percentage of large particles than in 1,500 rpm. However, the drilling speed didn't effect on total volume of and weight of bone debris.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.234-238
• /
• 1999

This study suggests the design of the functionally gradient composite, [0/90/0/core]$_s$ cross-ply laminate, to prevent stress concentration induced from the difference of rigidity between the bone and the artificial hip joint and to reinforce the wear property of the surface and the expectation of their mechanical properties. First, the four-point bending test is done about wet bones and dry bones to know the mechanical properties of the cortical bones. In result, the wet bone shows the viscoelastic behavior and the dry bone shows the elastic behavior. Moreover, we expect the properties of the proposed gradient composites as a function of carbon fiber volume fraction in each layer to apply Halpin-Tsai equation, CLPT(classical laminate plate theory), and Bernoulli beam theory etc. and decide the thickness ratio of each lamina in order to match Young's modulus of the anisotropic cortical bone with the proposed gradient composites.

• Nutrition Research and Practice
• /
• v.7 no.1
• /
• pp.22-25
• /
• 2013

This study was performed in order to investigate the effects of taurine on cadmium poisoning in muscle, gill, and bone tissues of wild goldfish. For this experiment, 80 wild goldfish were divided into four experimental groups: 0.3 mg/L of cadmium and 0 mg/L of taurine (Group I), 0.3 mg/L of cadmium and 20 mg/kg of taurine (Group II), 0.3 mg/L of cadmium and 40 mg/L of taurine (Group III), and 0.3 mg/L of cadmium and 80 mg/L of taurine (Group IV). The results were as follows: The cadmium concentration in muscle tissue of wild goldfish was 0.65-3.21 mg/kg wet wt in Group I, whereas it decreased in Group IV. Levels of cadmium in gill tissue of wild goldfish were 16.57-42.39 mg/kg wet wt in Group I, 15.23-43.01 mg/kg wet wt in Group II, 15.11-39.56 mg/kg wet wt in Group III, and 13.15-38.55 mg/kg wet wt in Group IV (P < 0.05), suggesting that the cadmium concentration decreased in the experimental groups compared to control. The cadmium concentration in bone tissue of wild goldfish after 28 days was 0.52-9.75 mg/kg in Group II, whereas it increased in Group III (P < 0.05). In conclusion, taurine may have a preventive effect against cadmium accumulation in biological tissues.

• The Korean Journal of Ecology
• /
• v.27 no.3
• /
• pp.141-146
• /
• 2004

This paper reports on Pb and Cd concentrations in the tissues of 76 individuals of 16 rare bird species found dead across Korea. In most of species, Pb concentration was higher in kidney and bone than in liver. The range of the mean liver Pb was 0.47 (Cygnus cygnus)∼3.74 ㎍/wet g (Asio flammeus). Based on hepatic Pb concentrations, 39 (51.3%) of the 76 individuals were classifed as background level (〈2㎍/wet g), 35 (46.1%) were elevated level (〉2㎍/wet g) and 2 (2.6%) were poisoned level (〉10㎍/wet g). These results were indicated many rare birds were suffered from chronic Pb exposure. Cd concentration was generally higher in kidney than in liver and bone. The range of the mean kidney Cd was 0.06 (Bubo bubo)∼l.75㎍/wet g (falco subbuteo). Only one of the 76 individuals had elevated Cd concentration (〉2.7㎍/wet g) in kidney. These results indicated most of rare birds had low Cd accumulations.

• Nutrition Research and Practice
• /
• v.8 no.5
• /
• pp.539-543
• /
• 2014

BACKGROUND/OBJECTIVES: Soy isoflavones are structurally similar to estrogen and bind to estrogen receptors, suggesting that they exhibit estrogenic activities; therefore, they are referred to as phytoestrogens. Fermentation may affect the bioavailability of isoflavones altering soy isoflavone glycosides in the form of aglycones. Thus, this study investigated the effects of fermented soybeans by Rhizopus oligosporus on bone metabolism in both young rats as a pilot test and in ovariectomized (ovx) old rats as a model of menopause. MATERIALS/METHODS: In the pilot test, a total of 24 seven-week-old female Sprague-Dawley (SD) rats were fed one of three diets for a period of four weeks: casein, unfermented soybean product, or fermented soybean product by R. oligosporus. In the ovx rat model, 20-week-old SD rats weighing 260-290 g underwent either sham-operation (n = 10) or bilateral ovariectomy (n = 30) and were then fed the AIN-93M diet for one week. Thereafter, rats were fed sham-casein, ovx-casein, ovx-soybean, or ovx-fermented soybean diet for five weeks. After decapitation, femoral bones were isolated and preserved in 9% formalin for assessment of bone mineral density (BMD), bone mineral content (BMC), and bone-breaking strength (BBS). RESULTS: Ovx rats showed significantly increased weight gain and decreased uterine wet weight. Of particular interest, ovx rats fed fermented soybeans showed increased uterine wet weights compared to control rats. Fermented soybean diet caused a significant increase in plasma 17-${\beta}$ estradiol concentrations in young rats, and 17-${\beta}$ estradiol levels were enhanced in ovx rats to match those of sham-operated ones. Significantly lower femoral BMD and BMC were observed in ovx rats compared to sham-operated controls, whereas bone areas did not differ statistically among the groups. In addition, BBS tended to be increased in ovx rats fed soybeans and fermented soybeans. CONCLUSIONS: Supplementation of fermented soybeans could have preventive and therapeutic effects against osteoporosis in postmenopausal women.

• KOMUNHWA
• /
• no.66
• /
• pp.87-112
• /
• 2005

Stain removal on ivory has been, for a long time, considered an undesirable treatment in conservation field because ivory is hygroscopic and anisotropic, having different physical properties in different directions. Cyclododecane, which sublimes at room temperature, has been investigated for its use in conservation field since 1995, as a reversible temporary consolidant, sealing agent or coating, water repellent, and barrier layer. This research aims to remove stains on ivory, temporarily protecting the none-stained area or painted area from methanol, acetone or the aqueous cleaning system using cyclododecane as a hydrophobic sealing agent. This research also aims to obtain information regarding whether cyclododecane can be safely and effectively used on archaeological wet ivory. Melted cyclododecane and saturated solutions of cyclododecane in mineral spirits, and hexanes were applied to ivory samples. Application methods, working properties of cyclododecane on ivory, and effect of cyclododecane coating on moisture content of wet ivory were evaluated. The sealing layer formed by molten cyclododecane or by saturated cyclododecane solution in hexane or saturated cyclododecane solution in mineral spirits did not form a secure contact with the surface of the highly polished ivory. The sealing formed with two different layers, in which saturated cyclododecane solution in hexane was applied initially and then molten cyclododecane was applied over the first layer, was found to securely protect the painted area. When the wet samples were kept in 100% RH environments for a month, active mold growths were observed except in the samples sealed with molten cyclododecane. In conclusion, cyclododecane was an efficient hydrophobic sealing agent to protect painting area while cleaning stains on ivory. It also prevented mold growing on wet ivory and wet bone. Evenness of cyclododecane film on ivory will be determined in UV light. Analytical techniques will include visual observation, polarized light microscopy, Scanning Electron Microscope, and Gas Chromatography.

• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.589-593
• /
• 2008

The hydroxyapatite with different amounts of strontium was synthesized with wet chemical technique. The structural, morphological and chemical characterizations for the prepared hydroxyapatite with various strontium amounts were carried out with XRD, SEM, EDS, and FT-IR. Strontium is quantitatively incorporated into hydroxyapatite where its substitution for calcium provokes a well distribution in the EDS mapping and a linear shift of the infrared absorption bands of the hydroxyl and phosphate groups, coherent with the greater ionic radius of strontium.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.670-675
• /
• 2016

Calcium phosphate crystallites were prepared by wet chemical method for use in artificial bone. In order to obtain ${\beta}$-tricalcium phosphate (TCP), nano-crystalline calcium phosphate (CaP) was precipitated at $37^{\circ}C$ and at $pH5.0{\pm}0.1$ under stirring using highly active $Ca(OH)_2$ in DI water and an aqueous solution of $H_3PO_4$. The precipitated nano-crystalline CaP solution was kept at $90^{\circ}C$ for the growth of CaP crystallites. Through the growing process of CaP crystallites, we were able to obtain various sizes of rectangular CaP crystallites according to the crystal growing times. Dry nano-crystalline CaP powders at $37^{\circ}C$ were mixed with dry macro-crystalline CaP crystallites and the shaped mixture sample was fired at $1150^{\circ}C$ to make a ${\beta}-TCP$ block. Several tens of nm powders were uniformly coated on the surface, which was comprised of powders of several tens of ${\mu}m$, using a vibrator. The mixing ratio between the nanometer powders and the micrometer powders greatly affected the mechanical strength of the mixture block; the most appropriate ratio of these two materials was 50 wt% to 50 wt%. The sintered block showed improved mechanical strength, which was caused by the solid state interaction between the nano-crystalline ${\beta}-TCP$ and the macro-crystalline ${\beta}-TCP$.