• Journal of Korean Critical Care Nursing
• /
• v.13 no.1
• /
• pp.27-43
• /
• 2020

Purpose : This integrative review aimed to synthesize studies on intensive care unit (ICU) nurses' attitude, perceptions, and experiences toward end-of-life care decision-making. Methods : Using Whittermore and Knafl (2005)'s methods, we identified and synthesized research articles published in domestic journals between the years 2003 and 2019 and evaluated the quality of selected articles using the Mixed Methods Appraisal Tool. Results : In the 13 studies reviewed, 12 were published prior to enactment of the "The Act for Hospice and Palliative Care and Decision-Making about Life-Sustaining Treatment (2018)." All nine quantitative studies identified were based on cross-sectional descriptive survey. In four qualitative studies, content analysis (n=2) and phenomenology (n=2) were used. Overall, ICU nurses were well-aware of the necessity of communicating and limiting life-sustaining treatments. Many ICU nurses had positive attitude towards limiting life-sustaining treatments to promote patients' comfort and dignity. Although nurses were willing to take active roles, they also reported having experienced high stress in the process of decision-making and implementation. Conclusions : It is important to prepare ICU nurses with proper knowledge and attitude regarding the topic area. It is also equally important to develop systems to support nurses' emotional stress and moral distress during communication, decision-making, and implementation.

• Journal of Environmental Impact Assessment
• /
• v.8 no.3
• /
• pp.35-47
• /
• 1999

The purpose of this study is to research the environmental amenity factors of a city to devise the strategies to preserve the factors. For this study, the area of Masan city in Korea was chosen, and questionnaires, field studies, and statistical researches were used. Based on the results, the research showed the city surveyed had expanded by 1,069%, and the population of the city had increased by 272% from 1970 to 1995. In the city-life environment, the traffic was not smooth and the streets were not safe. The number of cars increased by 40,797% from 1970 to 1995, but the total length of roads increased only by 333%. The number of traffic accidents increased by 850%. Buildings were not preserved or maintained and did not have any traditional value. Additionally, buildings were not harmonious with environmental surroundings. Land allocation for utilization was not mixed well with tradition. In relation with the surroundings, there were not enough spaces for old people, and parking spaces were limited. In the field of public policy and finance, economic support and fundamental facilities were not enough. The survey of the household environment and the neighborhood environment showed that the room temperature, sunshine, air condition, and space were medial in the household environment. Public social facilities and entertainment culture had the lowest quality in the neighborhood environment. The city-life environment, the neighborhood environment, and the household environment affected the quality of life in order. The above results showed that cities should be planned upon sustainable development with the idea of emphasizing ecological harmony and considering people first, that citizen should be planned upon sustainable life by the harmony between people and the environment. Cities should be places where all people can live together pleasantly and cooperate with each other.

• Journal of Forest and Environmental Science
• /
• v.32 no.2
• /
• pp.140-148
• /
• 2016

This study aims to estimate the forest volumes of the economic forest in Gangwon Province of Republic of Korea (hereinafter referred to as Gangwon) through the synthetic estimation. To estimate the forest volume, Stratified systematic sampling method was used along with the forest type maps and the $5^{th}$ National Forest Inventory data. The synthetic estimation includes sample plots of the expanded areas as well as those of the target area, and the forest volume of economic forest in every city and county throughout Gangwon. Results show that the average forest volume calculated by synthetic estimation was $159.6m^3/ha$ in national economic forest and $129.6m^3/ha$ in private economic forest. The total forest volume of the national economic forest was approximately $59.45million\;m^3$, which was $20.18million\;m^3$ higher than that of the private economic forest. On the other hands, the standard error of the national economic forest was approximately ${\pm}2.21m^3/ha$, which was ${\pm}0.30m^3/ha$ lower than that of the private economic forest. The lowest standard errors was about ${\pm}3.12 m^3/ha$ in broad-leaved forest, followed by ${\pm}4.33m^3/ha$ of mixed forest, and ${\pm}5.78m^3/ha$ of coniferous forest.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.4
• /
• pp.514-521
• /
• 2018

Objective: This experiment was conducted to investigate the effects of crude glycerin from waste vegetable oil (CGWVO) on performance, carcass traits, meat quality, and muscle chemical composition. Methods: Twenty-four crossbred (Thai Native${\times}$Anglo Nubian) uncastrated male goats ($16.8{\pm}0.46kg$ body weight [BW]) were assigned to a completely randomized design and subjected to four experimental diets containing 0%, 2%, 4%, and 6% of CGWVO (63.42% of glycerol and 47.78% of crude fat) on a dry matter (DM) basis. The diets were offered ad libitum as total mixed rations twice daily. The feed intake, feeding behavior, growth performance, carcass and meat traits, and muscle chemical composition were evaluated. Results: Based on this experiment, there were significant differences (p>0.05) among groups regarding DM intake, growth performance, and carcass traits where goats receiving 6% of CGWVO had lower daily DM intake, growth performance, and carcass traits than those fed on 0%, 2%, and 4% of CGWVO. There were no effects of CGWVO on carcass length, carcass width, Longissimus muscle (LM) area, Warner-Bratzler shear force, pH and color of LM at 45 min after slaughter, as well as on other carcass cut and muscle chemical composition. Conclusion: In conclusion, the addition of up to 4% of DM in the diets for crossbred finishing goats seems to be the most interesting strategy, since it promotes greatest animal performance. Moreover, this study was a suitable approach to exploit the use of biodiesel production from waste vegetable oil for goat production.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.83-89
• /
• 2000

This paper presents a pressure drop correlation for evaporation and condensation of alternative refrigerant with oil in micro-fin tubes. The correlation was developed from a data base consisting of oil-free pure and mixed refrigerants in micro-fin tube; Rl25 R134a. R32 R410a(R32/R125 50/50% mass), R22, R407c(R32/R125/R134a, 23/25/52% mass) and R32/R134a(25/75% mass). The micro-fin tube used in this paper had 60 0.2mm high fins with a 18 helix angle. The cross sectional flow area $(A_c)$ was $60.8 mm^2$ giving an equivalent smooth diameter$(D_e)$ of 8.8mm. The hydraulic diameter $(D_h)$ was estimated to the 5.45mm. The new correlation was obtained by replacing the friction factor and the tube-diameter in Bo Pierre correlation by a friction factor derived from pressure drop data for a micro-fin tube and the hydraulic diameter, respectively. This correlation was also used to predict some pressure data with a lubricant after using a mixing viscosity rule of lubricants and refrigerants. As a result, the new correlation was also well predicted to the measured data within a mean deviation of 19.0%.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.2
• /
• pp.146-153
• /
• 2008

Integrated humidity sensor system with two stages operational amplifier has been designed and fabricated by $0.8{\mu}m$ analog mixed CMOS technology. The system (28 pin and $2mm{\times}4mm$) consisted of Wheatstone-bridge type humidity sensor, resistive type humidity sensor, temperature sensors and operational amplifier for signal amplification and process in one chip. The poly-nitride etch stop process has been tried to form the sensing area as well as trench in a standard CMOS process. This modified technique did not affect the CMOS devices in their essential characteristics and gave an allowance to fabricate the system on same chip by standard process. The operational amplifier showed the stable operation so that unity gain bandwidth was more than 5.46 MHz and slew rate was more than 10 V/uS, respectively. The drain current of n-channel humidity sensitive field effect transistor (HUSFET) increased from 0.54 mA to 0.68 mA as the relative humidity increased from 10 to 70 %RH.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.56-62
• /
• 2013

Organic wastes are not disposing object but renewable resources. One of those ways of rendering to resources, composting is environmentally friendly way as to aspect of recycling of resources. Regardless of ways, composting goes through the main processes which are fermentation process and curing process. In the study, mobile composting device was developed with the experiments which were performed to solve the problems of fermentation and curing process. Since reaction vessel is rotated, it does not cease in the middle of agitation because of foreign. In addition, it mixed as well. With maintaining uniform temperature of reaction vessel by controlling amount of air, fermentation and curing are easy to use. Its economic feasibility is better than the existing fermentation equipments. Furthermore, it benefits to reduce the personnel and materiel maintenance cost, and mass produce composting product which use organic waste. Especially, although it needs less space, it has effect to provide transferable composting device with available area to increase by contacting organic waste to air.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.219-224
• /
• 2017

A study on dissimilar friction-welded joints was performed for cam shaft applications using solid bar samples, 20mm in diameter, of forging steel(SF45) and carbon steel(SM45C). The main parameters of friction welding such as tensile tests, Vickers hardness surveys of the bond of area, the heat affected zone (HAZ), and the observation of microstructure were investigated to ensure a good quality of friction welding through visual observations. The specimens were tested as-welded and post weld heat treatment(PWHT). This paper deals with optimizing the welding conditions and analyzing various rotary bending fatigue test(RBFT) properties about heat-treated base metal(BM), as-welded and PWHT. Consequently, two materials for friction welding are strongly mixed with a well-combined structure of micro-particles without any molten material, particle growth, or any defect. Moreover, the fatigue limit of BM(SF45) and PWHT for the RBFT were observed as 180MPa and 250MPa, respectively. It was confirmed that the PWHT causes approximately 40％ improvement in the fatigue limit when compared to the BM(SF45).

• School Mathematics
• /
• v.10 no.2
• /
• pp.259-277
• /
• 2008

Conventional assessments only provide a single summary score that indicates the overall performance level or achievement level of a student in a single learning area. For assessments to be more effective, test should provide useful diagnostic information in addition to single overall scores. Cognitive diagnosis modeling provides useful information by estimating individual knowledge states by assessing whether an examinee has mastered specific attributes measured by the test(Embretson, 1990; DiBello, Stout, & Rousses, 1995; Tatsuoka, 1995). Attributes are skills or cognitive processes that are required to perform correctly on a particular item. By the results of this study, students, parents, and teachers would be able to see where a student stands with respect to mastering the attributes. Such information could be used to guide the learner and teacher toward areas requiring more study. By being able to assess where they stand in regard to the attributes that compose an item, students can plan a more effective learning path to be desired proficiency levels. It would be very helpful to the examinee if score reports can provide the scale scores as well as the skill profiles. While the scale scores are believed to provide students' math ability by reporting only one score point, the skill profiles can offer a skill level of strong, weak or mixed for each student for each skill.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.183-183
• /
• 2011

Multiferroic materials have been widely studied in recent years, because of their abundant physics and potential applications in the sensors, data storage, and spintronics. $BiFeO_3$ is one of the well-known single-phase multiferroic materials with $ABO_3$ structure and G-type antiferromagnetic behavior below the Neel temperature $T_N$ ~ 643 K, but the ferroelectric behavior below the Curie temperature $T_c$~1,103 K. In this study, the $BiFe_{1-x}Ni_xO_3$ (x=0 and 0.05) bulk ceramics were prepared by solid-state reaction and rapid sintering with high-purity $Bi_2O_32$, $Fe_3O_4$ and NiO powders. The powders of stoichiometric proportions were mixed, as in the previous investigations, and calcined at 450$^{\circ}C$ for $BiFe_{1-x}Ni_xO_3$ for 24 h. The obtained powders were grinded, and pressed into 5-mm-thick disks of 1/2-inch diameter. The disks were directly put into the oven, which has been heated up to 800$^{\circ}C$ and sintered in air for 20 min. The sintered disks were taken out from the oven and cooled to room temperature within several min. The phase of samples was checked at room temperature by powder x-ray diffraction using a Rigaku Miniflex diffractometer with Cu K${\alpha}$ radiation. The Raman measurements were carried out by employing a hand-made Raman spectrometer with 514.5-nm-excitation $Ar^+$ laser source under air ambient condition on a focused area of 1-${\mu}m$ diameter. The field-dependent magnetization measurements were performed with a superconducting quantum-interference-device magnetometer.