• Journal of Forest and Environmental Science
• /
• 제28권3호
• /
• pp.170-178
• /
• 2012

Dipterocarps or Dipterocarpaceae is a commercially important timber producing and dominant keystone tree family in the rain forests of Borneo. Borneo's landscape is changing at an unprecedented rate in recent years which affects this important biodiversity. This paper attempts to model the natural occurrence (distribution including those areas with natural forests before being converted to other land uses as opposed to current distribution) of dipterocarp species in Sarawak which is important for forest biodiversity conservation and management. Local modeling method of Inverse Distance Weighting was compared with commonly used statistical method (Binary Logistic Regression) to build the best natural distribution models for three genera (12 species) of dipterocarps. Database of species occurrence data and pseudoabsence data were constructed and divided into two halves for model building and validation. For logistic regression modeling, climatic, topographical and edaphic parameters were used. Proxy variables were used to represent the parameters which were highly (p>0.75) correlated to avoid over-fitting. The results show that Inverse Distance Weighting produced the best and consistent prediction with an average accuracy of over 80%. This study demonstrates that local interpolation method can be used for the modeling of natural distribution of dipterocarp species. The Inverse Distance Weighted was proven a better method and the possible reasons are discussed.

• 정보과학회 논문지
• /
• 제43권11호
• /
• pp.1270-1274
• /
• 2016

로지스틱 회귀분석은 통계학 등의 분야에서 예측을 위한 기술 혹은 변수 간의 상관관계를 설명하기 위하여 오랫동안 사용되어 왔다. 이러한 로지스틱 회귀분석 방법에서 현재 각 속성들은 목적 값에 대하여 동일한 중요도를 가지고 있다. 본 연구에서는 이러한 가중치 계산을 좀더 세분화하여 각 속성의 값이 서로 다른 중요도를 가지는 새로운 학습 방법을 제시한다. 알고리즘의 성능을 최대화하는 각 속성값 가중치의 값을 계산하기 위하여 점진적 하강법을 이용하여 개발하였다. 본 연구에서 제안된 방법은 다양한 데이터를 이용하여 실험하였고 속성값 기반 로지스틱 회귀분석 방법은 기존의 로지스틱 회귀분석보다 우수한 학습 능력을 보임을 알 수 있었다.

• 자원ㆍ환경경제연구
• /
• 제13권2호
• /
• pp.245-269
• /
• 2004

환경보전 활동을 위한 노력도 교부금과 같은 예산의 지역간 배분에 있어 감안이 되어야 하는데 그렇지 못하고 있다. 개발활동만 기준하여 지원되고 있다. 본 연구의 주된 목적은 환경변수를 예산 배분정책에 반영할 수 있는 방법을 개발하고 이를 실제로 적용하는데 있다. 본 연구는 각 지역별 환경에 미치는 다양한 변수들을 고려하여, 지역간 환경 기여도의 평가방법론을 개발하고 검증하였다. 최대최소법, 최대최대법, 단순가중치법, 계층가중치법과 같은 네 가지 방법론을 적용하여, 대구시의 환경 기여도를 평가해 본 결과, 극단적 상황이 예상되지 않는 조건 하에서 단순가중치법과 계층가중치법을 우선해서 대구시 환경 기여도를 분석할 수 있었다. 이른 기준을 감안한 예산배분은 개발에 치중된 재정지원에서 환경적으로 건전한 지역개발을 유도하는데 기여할 것으로 기대한다.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1051-1057
• /
• 2004

A numerical optimization procedure for the shape of three-dimensional channel with angled ribs mounted on one of the walls to enhance turbulent heat transfer is presented. The response surface method is used as an optimization technique with Reynolds-averaged Wavier-Stokes analyses of flow and heat transfer. SST turbulence model is used as a turbulence closure. Computational results for local heat transfer rate show reasonable agreements with experimental data. The pitch-to-height ratio of the rib and rib height-to-channel height ratio are set to be 9.0 and 0.1, respectively, and width-to-rib height ratio and attack angle of the rib are chosen as design variables. The objective function is defined as a linear combination of heat-transfer and friction-loss related terms with weighting factor. Full-factorial experimental design method is used to determine the data points. Optimum shapes of the channel have been obtained in the range from 0.0 to 0.1 of weighting factor.

• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.403-413
• /
• 2017

The fabric braided braking hose that delivers the driver's braking force to brake cylinder undergoes the large deformation cyclic motion according to the steering and bump/rebound motions of vehicle. The cyclic large deformation of braking hose may give rise to two critical problems: the interference with other adjacent vehicle parts and the micro cracking stemming from the fatigue damage accumulation. Hence, both the hose deformation and the fatigue damage become the critical issue in the design of braking hose. In this context, this paper introduces a multi-objective optimization method for minimizing the both quantities. The total length of hose and the helix angles of fabric braided composite layers are chosen for the design variables, and the maximum hose deformation and the critical fatigue life cycle are defined by the individual single objective functions. The trade-off between two single objective functions is made by introducing the weighting factors. The proposed optimization method is validated and the improvement of initial hose design is examined through the benchmark simulation. Furthermore, the dependence of optimum solutions on the weighting factors is also investigated.

• 대한조선학회논문집
• /
• 제54권5호
• /
• pp.368-377
• /
• 2017

Outfittings of offshore plants and high value-added vessels, such as FPSO, drillship, are much more than outfittings of general ships. So the complexity of the outfittings is increased and the importance of outfittings has also increased. But, there is no clear method to define the installation sequence of outfittings, yet. In this study, we developed the algorithm to define the installation sequence of outfittings by applying variables and constraints related to outfitting, such as process parameters, weighting coefficients, installation constraints. Also, we developed the application that applied the algorithm and compared cases by changing the weighting coefficients of process parameters. We verified the practicality of the algorithm by developing the application. The results of this study are that the accuracy of the outfitting planning is improved and efficient lead time can be predicted by defining the installation sequence of outfittings.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.33-38
• /
• 2010

Technology of vehicle industry has been developing and it is required a better vehicle performance than before. Therefore, the consumers are asking not only an economic efficiency, functionality, polished design, ride comfort and silence but also a driving stability. The ride comfort, silence and driving stability are influenced by the size of vehicle and various facilities. But the principal factor is a room noise and vibration sensed by a driver and passenger. Thus, the NVH of vehicle has been raised and used as a principal factor for evaluation of vehicle performance. The primary objective of this study is an optimized design of powertrain mounting system. To optimized design was applied MSC.Nastran optimization modules. Results of dynamic analysis for powertrain mounting system was investigated. By theses results, design variables was applied 12 dynamic spring constant. And the weighting factor according to translational displacement and rotational displacement applied 3 cases. The objective function was applied to minimize displacement of powertrain. And the design variable constraint was imposed dynamic spring constant ratio. The constraint of design variable for objective function was imposed bounce displacement for powertrain.

• 설비공학논문집
• /
• 제15권10호
• /
• pp.860-869
• /
• 2003

Design optimization of the heat sink with 7${\times}$7 square pin-fins is performed numerically using the Computational Fluid Dynamics (CFD) and the Computer Aided Optimization (CAO). In the pin-fins heat sink, the optimum design variables for fin height (h), fin width (w), and fan-to-heat sink distance (c) can be achieved when the thermal resistance ($\theta$$_{j}$) at the junction and the overall pressure drop ($\Delta$p) are minimized simultaneously. To complete the optimization, the finite volume method for calculating the objective functions, the BFGS method for solving the unconstrained non-linear optimization problem, and the weighting method for predicting the multi-objective problem are used. The results show that the optimum design variable for the weighting coefficient of 0.5 are as follows: w=4.653 mm, h=59.215 mm, and c=2.667 mm. In this case, the objective functions are predicted as 0.56K/W of thermal resistance and 6.91 Pa of pressure drop. The Pareto optimal solutions are also presented.re also presented.d.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.97-110
• /
• 2021

Fog can cause large-scale human and economic damages, including traffic systems and agriculture. So, Korea Meteorological Administration is operating about 290 visibility meters to improve the observation level of fog. However, it is still insufficient to detect very localized fog. In this study, high-resolution grid-type visibility data were retrieved from irregularly distributed visibility data across the country. To this end, three objective analysis techniques (Inverse Distance Weighting (IDW), Ordinary Kriging (OK) and Universal Kriging (UK)) were used. To find the best method and parameters, sensitivity test was performed for the effective radius, power parameter and variogram model that affect the level of objective analysis. Also, the effect of data distribution characteristics (level of normality) on the performance level of objective analysis was evaluated. IDW showed a relatively high level of objective analysis in terms of bias, RMSE and correlation, and the performance is inversely proportional to the effective radius and power parameter. However, the two Krigings showed relatively low level of objective analysis, in particular, greatly weakened the variability of the variables, although the level of output was different depending on the variogram model used. As the level of objective analysis is greatly influenced by the distribution characteristics of data, power, and models used, care should be taken when selecting objective analysis techniques and parameters.

• 디지털융복합연구
• /
• 제17권5호
• /
• pp.217-223
• /
• 2019

자동차 분야에서 저항 점용접의 결함 및 품질을 실시간으로 예측할 수 있는 연구는 원가절감과 고품질 생산을 위한 필수 불가결한 연구 분야라 할 수 있다. 용접 품질은 전단강도와 너깃의 크기에 의해서 결정되며 여러 가지 독립변수에 따라 결과가 달라진다. 실시간 예측시스템을 개발하기 위하여 다중 회귀분석을 실시하여 3개의 독립변수로 두 가지 종속변수를 충분한 통계적 결과로 구하였으나 회귀식에 의한 품질 예측은 정확도를 보장할 수 없었다. 본 연구에서는 다층 신경망 회로를 구축하였다. 10가지의 동저항 변수에 의한 신경망은 3개의 은닉층을 구축하여 실행 함수와 가중치 행렬을 구하였다. 그러나 이 경우, 입력 변수가 너무 많아 실시간 제어에 어려움이 있을 수 있으므로 회귀분석에 의한 3개의 독립변수로 신경망을 구축하였다. 그 결과 모든 시험데이터를 불량, 부분 불량, 양품으로 구분하는데 성공하였다. 따라서 다중 회귀분석에 의해서 구한 3개의 독립변수에 의한 실시간 용접 품질 판정 시스템을 완성할 수 있었다.