• Journal of Environmental Science International
• /
• v.12 no.9
• /
• pp.897-903
• /
• 2003

This study focuses on importance level analysis of environmentally-friendly planning factors using Analytic Hierarchy Process(AMP). This study verify different planning principle makes comparison matrix by a relative comparison value, verified consistency after yield weight to analyze more objective importance for apartment complex estate environmentally-friendly planning factor. In order to decide importance of apartment complex estate environmentally-friendly planning factors multiplying weight of verified planning principle with weight of planning factors. The results are as follows; First, importance of preservation of green tract of lands, Preparation of Biotop, Tree planting of sites, Propriety of development density high except Circulation and practical use of water. Next, valued planning factors constituent appeared to Energy efficient building plan, Rubbish recycling, thermal utilization of solar energy, Artificial tree planting of buildings etc. importantly. Finally, plan constituent that importance is underrated most appeared by Practical use of building materials and equipment, Centralization of energy and resources, Preservation of corridor etc.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.337-342
• /
• 2005

This study was conducted to investigate the bark production from a top branch(Woojuk) of lacquer tree(Rhus verniciflua) that collected Rhus lacquer in summer, analyzing a relationship between several factors - diameter, tree weight, weight of Woojuk and bark. The weight of Woojuk averaged was made up $48\%$ of the tree on average. As the weight of the tree increased, however, the Woojuk showed the rising trend. It was turned out that the tree size for making 1kg of dry bark must be at least DBB 8cm. The result on Woojuk's bark was that $43.3\%$ of total trees produced a green bark of 1.1kg to 1.5kg, and most of them put out 1.5kg and less. Also the rate of trees to make 0.6kg to 1.0kg of dry bark was highest in $50.8\%$, but its production in most trees was 1.0kg and below. As the moisture content of a green bark averaged $39\%$, it is estimated that the production of 1kg in dry bark requires at least 6kg of top branch in lacquer tree.

• Korean Journal of Poultry Science
• /
• v.31 no.1
• /
• pp.25-31
• /
• 2004

The effect of drinking rhus tree-extract on performance of broiler was performed to investigate development of natural antibiotic in process of broilers production. A total of 320 broiler chicks at 1 day of age were fed the commercial diet and water, drinking water containing 0 ppm(control), 500 ppm (T1), 1,000 ppm (T2) and 2,000 ppm (T3) of rhus tree-extract fur seven weeks. The body weight gain and fred conversion ratio were not different by drinking rhus tree-extract until 35 days of age, but body weight gain and feed conversion ratio were tend to improve by drinking rhus tree-extract over 35 days of age, the improvement was higher in both T$_1$, and T$_3$ than control group(p＜0.05) when 35 to 42 days of age. There was a decrease in the microflora population of both E. coli. end Salmonella in the cecum contents and feaces in broilers by drinking rhus tree-extract. The digestibility of dry matter, crude fat, and crude ash of feed were tend to increased in broiler drinking rhus tree-extract. Digestibility of crude protein of feed in broiler three treated groups was significantly improved (p＜0.15) as compared with those in control group. These results indicated that the drinking rhus tree-extract were effective in the body weight gain, feed conversion ratio, decreasing of microflora population of both E. coli and Salmonella in the cecum contents and feaces, and it had also effective the digestibility of nutrients in broilers.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.35-42
• /
• 2014

This paper suggests a method that obtains the minimum spanning tree (MST) far more easily and rapidly than the present ones. The suggested algorithm, firstly, simplifies a graph by means of reducing the number of edges of the graph. To achieve this, it applies a method of eliminating the maximum weight edge if the valency of vertices of the graph is equal to or more than 3. As a result of this step, we can obtain the reduced edge population. Next, it applies a method in which the maximum weight edge is eliminated within the cycle. On applying the suggested population minimizing and maximum weight edge deletion algorithms to 9 various graphs, as many as the number of cycles of the graph is executed and MST is easily obtained. It turns out to lessen 66% of the number of cycles and obtain the MST in at least 2 and at most 8 cycles by only deleting the maximum weight edges.

• Journal of KIISE:Databases
• /
• v.36 no.5
• /
• pp.341-351
• /
• 2009

Recently high utility pattern (HUP) mining is one of the most important research issuer in data mining since it can consider the different weight Haloes of items. However, existing mining algorithms suffer from the performance degradation because it cannot easily apply Apriori-principle for pattern mining. In this paper, we introduce new high utility pattern mining approach by using a prefix-tree as in FP-Growth algorithm. Our approach stores the weight value of each item into a node and utilizes them for pruning unnecessary patterns. We compare the performance characteristics of three different prefix-tree structures. By thorough experimentation, we also prove that our approach can give performance improvement to a degree.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.316-324
• /
• 2001

A table compression method for reversible variable length code is proposed in this paper. TNWT(Transition Number and Weight of Tree) method, which uses the transition number of bits within a symbol and the level of a code tree, is proposed. Compression of table values is performed after arrangment of values that is not distinghishable by transition number and weights. In decoding, the transition number and weight of code are used. In this method, the table for RVLC decoding can be implemented with a smaller memory.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.271-277
• /
• 2012

In this paper, we propose a dynamic tree formation protocol for multiple UAV which is gathering data or accomplishing a mission such as disaster monitoring, environment monitoring, and disaster relief. Especilly, we designed Hop-LQI Weight algorithm to form optimal tree in wireless dynamic environment applying situation of radio signal attenuation over distance and implemented our algorithm in MSP 430 K-mote sensor platform using TinyOS codes. We verified performance of our algorithm by comparing average link setup time by the number of nodes with minimum LQI, link cost calculation method in wireless communication.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.215-224
• /
• 2011

In this paper, a mechanism connecting all weighted migration routes with minimum cost with EGOSST is proposed. Weighted migration routes may be converted to weighted input edges considered as not only traces but also traffics or trip frequencies of moving object on communication lines, roads or railroads. Proposed mechanism can be used in more wide and practical area than mechanisms considering only moving object traces. In our experiments, edge number, maximum weight for input edges, and detail level for grid are used as input parameters. The mechanism made connection cost decrease average 1.07% and 0.43% comparing with the method using weight minimum spanning tree and weight steiner minimum tree respectively. When grid detail level is 0.1 and 0.001, while each execution time for a connecting solution increases average 97.02% and 2843.87% comparing with the method using weight minimum spanning tree, connecting cost decreases 0.86% and 1.13% respectively. This shows that by adjusting grid detail level, proposed mechanism might be well applied to the applications where designer must grant priority to reducing connecting cost or shortening execution time as well as that it can provide good solutions of connecting migration routes with weights.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.302-304
• /
• 1997

Chemical structure and electrical properties such as water treeing and space charge accumulation of various raw materials(XLPE) used for power cable insulation were investigated. It was found that chemical structure was changed after crosslinking reaction and every materials have different amounts of DCP and antioxidant. Electrical properties were also changed after extraction using $CHCl_3$ and xylene. Water tree length was smaller with additives such as DCP and antioxidant and bigger with low molecular weight components of polyethylene than that of extracted samples. Heterocharge was changed into homocharge after extraction. This shows that additives and low molecular weight components of polyethylene cause the heterocharge.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.2
• /
• pp.120-124
• /
• 1994

Browse from oriental white oak(Quercus aliena Blume) was analysed for nutritive value and biomass estimation. The content of cmde protein was high on August and September. NDF, ADF and lignin contents were increased with progressing the seasons but IVDMD, TDN, DE and ME levels were not different from the variation of seasons. Tannin content was high on May and June. Basal stem diameter $\times$ height of tress was highly correlated with browse dry weights(r=0.80**) and the linear regression equation are the follows; Y = 8.23 + O.57X(Y = browse dry weight(g), X= basal stem diameter $\times$ height(cm)). Using the traditional cutting method, the amounts of browse was determined as 823 g dry weight per tree, while the new method by the above equation gave a similar results, i. e., 793 g dry weight per tree. The possibility of browse biomass estimation of oriental white oak by the basal stem diameter $\times$ height index was found.