• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.1-10
• /
• 2013

In this paper, we propose a method of embedded linux light-weight to improve efficiency of application running on embedded systems. Three methods including fast booting scheme applying the Hibernation technique, JFFS2 file system optimization applying the Symbolic Link and virtual address mapping, kernel light-weight that guarantees the general purpose was applied. Since then check the system dependency and generate kernel image according to the target embedded kit. And embedded system performance of existing linux and linux which the method proposed in this paper was compared. In experimental result, the kernel size was 9.6% improved and the system booting time was 18% improved. And application processing speed on target embedded kit was improved 11% in the best case, 66% in the worst case. This result show that the light-weight method proposed in this paper is guarantee fast booting time and securing resources and it is good for the application processing speed improvement.

• Journal of the Korean Home Economics Association
• /
• v.26 no.1
• /
• pp.33-42
• /
• 1988

This study was done for the purpose of analysing the relationships between the clothing weight and health state on the kindergartners. The data were collected in July. Oct. 1986, and February, April. 1987, 324 kindergartners is Seoul. And those factors assumed in the study to have impacts on the clothing weight were, 1) Anthropometric measurement and BMI, Kaup-Index, % fat. 2) The motor ability 3) The health states assumed by application of cornell medical index and health state, Incidence, medical history. The results obtained were to follows. 1) In November, clothing weight was ghigh correlation between anthropometric measurements, BMI, Kaup-Index, motor ability and cornell-medical index. 2) The health problem scores were significant in total clothing weight, upper wear clothing weight, under wear clothing weight. 3) The relation between clothing weight and weight, BMI, motor ability and cold contration among the health state scores proves to be significant correlation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.8
• /
• pp.334-340
• /
• 2006

Copper is widely used in electric wire, cable, conductor in electric devices. As the demand for electric power is increasing rapidly, electric power devices are getting amazingly bigger and complicated. The using of light-weight conductor can reduce the size and making cost of the electric devices. In high-frequency application, Electric current in a conductor tends to shift to the surface of the conductor, resulting in an uneven current distribution in the inner conductor. In the extreme case the current may essentially concentrate in the 'skin' of the inner conductor as a surface current. In high frequency application, therefore, inner area of copper conductor may replace with aluminum conductor, which reduces the weight of conductor. This paper describes the manufacture and evaluation of composite conductors made of copper and aluminum. The optimum extruding ratio was 16 at $300^{\circ}C$. The electrical resistance of manufactured composite bus bar was $57{\mu}{\Omega}$ at DC and $49.5{\mu}\{Omega}$ at 300Hz.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.23-31
• /
• 2014

Recently, sewer-pipe constructions replacing deteriorated pipes are currently underway in the downtown area. To resolve many problems in the conventional method of open-cut construction, lining-board system using light-weight GFRP panels is developed. The pultruded GFRP panels can be successfully used for the developed lining-board system as temporary decks and retaining walls in virtue of light weight, high strength and high durability. In this paper, the structural safety and serviceability of the lining-board system are examined through FE analyses and experiments. Further more, a field application of the lining-board system is presented. The field application shows that quality and environment of construction can be significantly improved.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.645-648
• /
• 2006

Recently, the method of the apartment building design has been changed from wall type structures to rahmen structures. With like this reason, dry walls are used plentifully. Especially, the gypsum board was used from previously plentifully however the weak point of it is difficult to maintain because it weak strength. For the improvement of gypsum board, light weight concrete panel using cement board is used recently. As this study is the research of the series t on the development of non-bearing light weight concrete panel using bottom ash, the purpose of this study is to obtain basic data for application in the field. The results are as follows. structure 1 satisfy domestic standard concerned with sound insulation between households at the laboratory and field test.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.66-75
• /
• 2000

The purpose of this study is to develop and illustrate methods of applying trade-off techniques to landing craft air cushion design evaluation. The problem areas of concern are the application of quantitative analytical methods to conceptual design. The interrelationships between composite system measures and selected performance requirements(speed, cruising range, cargo etc.) are analyzed and the expressions for gross weight are developed as functions of performance parameters. Trade-offs of performance parameters in terms of weight are then calculated. The application of these results to evaluation of Require Operational Capabilities are illustrated.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.71-76
• /
• 2003

The purpose of this study is the development, application and assessment of probability and artificial neural network methods for assessing landslide susceptibility in a chosen study area. As the basic analysis tool, a Geographic Information System (GIS) was used for spatial data management. A probability method was used for calculating the rating of the relative importance of each factor class to landslide occurrence, For calculating the weight of the relative importance of each factor to landslide occurrence, an artificial neural network method was developed. Using these methods, the landslide susceptibility index was calculated using the rating and weight, and a landslide susceptibility map was produced using the index. The results of the landslide susceptibility analysis, with and without weights, were confirmed from comparison with the landslide location data. The comparison result with weighting was better than the results without weighting. The calculated weight and rating can be used to landslide susceptibility mapping.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.149-155
• /
• 2006

This paper is concerned with the weight reduction of front side member of a vehicle considering the application of high strength steel sheet. The influence of steel sheet grade and thickness on the energy absorption, impact load and deformed shape of front side member is investigated by using reverse engineering and FE-analysis. The reverse engineering is applied to obtain 3D model of front side member from B.I.W for the FE simulation. FE analysis is carried out with commercial crash analysis SW PAM-CRASH. The crashworthiness of front side member is considerably improved with steel sheet strength and thickness increase. From the result of this study the weight reduction in automotive parts for the improvement of the fuel efficiency can be easily achieved with replacing high strength steel without deterioration of crashworthiness.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.1
• /
• pp.26-29
• /
• 1994

The topical application of methoprene a kind of juvenile hormone(JH) on 4th instar larvae at 48th hour after ecdysis-3 , followed by insulin on 5th instar larvae and silkgland weights, cocoon weight and cocoon shell weight, and fecundity ; and significantly decreases percent of cocooning and moth emergence. After treatment with methoprene followed by insulin, cocoon weight increase by 17~20% and cocoon shell weights by 18~32% respectively.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.51-54
• /
• 2013

Chitosan is a useful natural polymer material in many application fields such as biomaterials, water-treatment, agriculture, medication, and food science. However, the poor solubility limits its application. In this study, the effects of radiation on chitosan were investigated using gamma ray and electron beam irradiation. The chemical structure and molecular weight analysis show similar degradation effects of chitosan powder in both gamma ray and electron beam irradiation. However, the radiation irradiated chitosan in $H_2O$ has a lower molecular weight, since the hydroxyl radicals attack the glycosidic bonds. This effect is more clearly shown in the electron beam irradiation results.