• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.727-730
• /
• 2001

초고속 인터넷 서비스의 확대에 따라 이를 교육에 직 간접적으로 응용하기 위한 노력이 지속적으로 진행되어 왔다. 특히 웹 기반의 가상강의 저작도구를 통한 웹 코스웨어는 원거리 학습자들의 학습 욕구를 자기 주도적인 학습을 통해 가능케 했고 기존의 텍스트, 사운드를 통한 가상강의에서 동영상이 가미된 주문형 교육 서비스(EOD: Education On Demand)가 가능해졌다. 그러나 이를 이용하는 학습자는 전체적인 모듈의 이해를 통해 수업이 진행됨에 따라 학습과정에서는 질의응답을 튜터를 통해 웹 캐스팅이 이루어졌다. 따라서, 질의응답은 텍스트 형식의 E-mail, 채팅, 게시판, 방명록을 통해 이루어지므로 학습자가 요구한 질의 내용을 잘못 이해하고 튜터가 학습 과정에서의 피드백을 제공하지 못함으로써 개인 학습의 동기부여가 감소됨에 따라 흥미를 잃게 되었다. 본 논문에서는 이러한 문제점을 개선하기 위해 멀티 캐스팅 기법을 통해 교육용 서버를 이용한 학습지원도구를 분석, 설계한다. 가상강의는 기본적인 컨텐츠를 제시하고 그를 통해 수업이 진행되는 과정에서의 질의응답을 일대다(One-To-Many)의 멀티 캐스팅 서비스를 튜터가 지정한 교육용 서버를 통해 텍스트 형식이 아닌 강의자료로 쓰인 문서 파일에 직접 작성하여 전송하게 된다. 따라서 튜터는 메일링 서비스를 통해 질문사항을 자신의 폴더 서비스로 확인하고 즉시 학습자에게 피드백을 제공함으로써 튜터와 학습자들간의 커뮤니케이션이 활발히 이루어지며, 상호작용의 증가를 통해 웹 기반의 컨퍼런싱(WBC: Web Based Conferencing)을 가질 수 있게 된다.rver는 Client가 요청한 Content(services)를 전달 해 주는 컨텐트 전달 모듈(Content Deliver Module)과 서버 Phonebook 엑세스 모들(Server Phonebook Access Module)로 구성되어 있다.외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.461-470
• /
• 2005

In leaner-controlled environment where learners can decide and restructure the contents, methods and order of learning by themselves, it is possible to apply individualized learning in consideration of each learner's characteristics. The present study analyzed learners' learning path pattern, which is one of learners' characteristics important in Web-based teaching-learning process, using the Apriori algorithm and grouped learners according to their learning path pattern. Based on the result, we designed and implemented a multi-dimensional learning path pattern analysis system to provide individual learners with teaming paths, learning contents, learning media, supplementary teaming contents, the pattern of material presentation, etc. multi-dimensionally. According to the result of surveying satisfaction with the developed system satisfaction with supplementary learning contents was highest (Highly satisfied '$24.5\%$, Satisfied'$35.7\%$). By learners' level, satisfaction was higher in low-level learners (Highly satisfied'$20.2\%$, Satisfied'$31.2\%$) than in high-level learners (Highly satisfied'$18.4\%$, 'Satisfied'$28.54\%$). The developed system is expected to provide learners with multi-dimensionally meaningful information from various angles using OLAP technologies such as drill-up and drill-down.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.412-425
• /
• 2008

One of the important elements for improving academic achievement of learners in education through e-learning is to support learners to study by finding questions they want with providing various evaluation questions. However, most of question retrieval systems usually depend on keyword search based on only a syntactical analysis and/or a hierarchical browsing system classified by the topics of subjects. In such a system it is not easy to find integrative questions associated with each other. In order to improve this problem, in this paper we proposed a question management and retrieval system which allows users to easily manage questions and also to effectively find questions for study on the Web. Then, we implemented a system that gives to access questions for the domain of C language programming. The system makes it possible to easily search questions related to not only a single theme but also questions integrated by interrelationship between topics and questions. This is done by supporting to be able to retrieve questions according to conceptual interrelationships between questions from user query. Consequently, it is expected that the proposed system will provide learners to understand the basic theories and the concepts of the subjects as well as to improve the ability of comprehensive knowledge utilization and problem-solving.

• Journal of Distribution Science
• /
• v.13 no.8
• /
• pp.97-104
• /
• 2015

Purpose - This study examines the positive impact of the social distance between producers and users of online content, investigating and analyzing the most popular Web content. In addition, it tries to elicit the matching effect that appears when the individuals'cultural background is consistent with social distance. Research design, data, and methodology - We collected and analyzed actual data about 4,981 videos clips on YouTube, looking at six countries in order to verify the content of this study. Based on the results of the data analysis, the study conducted behavioral measurements on popularity, social distance, culture, and user engagement. The unit of analysis was the content and we collected information about the content producers and the content records. We controlled the views, comments, likes, calendar dates, and ages in the empirical models. The data was collected in 2011, with the records coming from South Korea, Japan, China, U.S., German, and France. A total of 4,980 elements were analyzed in the model. The empirical model estimated is the bivariate negative binomial distribution (NBD) model. Results - It turns out that there is a possibility that the matching effect can be diminished by variables that reflect the psychological involvement of user engagement. This study proposes academic and practical implications based on these research results. This research shows the positive effect of social distance between users and producers on the increased performance of the online content. We find the effect of social distance to be a stronger tendency in collectivism. The collectivists follow their sense of friendship and intimacy in their culture and, the social congruence effect can be found there as well. The effect, however, could erode in a social case where users are motivated by strong intrinsic and psychological factors. In addition, user engagement complicates the process of user decision making regarding the information. Conclusions - This study examines how the differential effects of social distance caused by culture could disappear through user commitment as a complicated user motivation. Some potential implications are as follows. First, a firm in the collectivism culture has to communicate based on the social distance. In fact, most online channels do not have a function that indicates the social distance as measured by favorites or subscribers. This function could help increase the performance of the content in online channels, but this increasing effect can only be found in a collectivist culture. Based on this, the firms have to communicate and announce to users the actual social distance between users and producers. Second, firms should develop a system that discovers the social distance and culture and shows these measures to users and producers, since the congruence effect between social distance and culture is found only for low user engagement. The firms can take the advantage of the congruence effect only for the development of the social distance and culture visualized system.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.711-718
• /
• 2010

The requirement of the maximum yield strength of shear reinforcement in the KCI-07 code is quite different to those in the ACI-08 code, EC2-02, CSA-04, and JSCE-04 codes. Eighteen RC beams having high strength shear reinforcement were tested. Test results indicated that even if the yield strength of shear reinforcement in beams was much greater than the maximum yield strength required by the KCI-07 design code, the shear reinforcement of these beams reached their yield strains. Furthermore, the shear strengths of tested beams increased almost linearly with the increase of the amount of shear reinforcement. In addition, larger numbers of diagonal cracks developed in the web of the beam having greater yield strength than the beams having lower yield strength of shear reinforcement. The maximum crack width of the beam having high strength shear reinforcement was approximately the same to the crack with of the beam having normal strength shear reinforcement.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.651-659
• /
• 2015

Currently, social demands for long span building structures are increasing due to architectural planning purposes and economic efficiency. As a result, lighter board-type voiding materials were suggested. With the use of board-type voiding materials, a slab is able to become light weight and convenient. This process efficiently eliminates concrete where it is not required; considerably diminishing dead weight while maintaining the flexural strength of the slab. The reduction in concrete also allows for overall cost reductions and design flexibility. Also it can be ease with fixing the voided material that is composed of one body form. Although board-type voiding materials are ideal, the top and bottom concrete plates lack integrity. Because of this, test results show horizontal cracking towards the tops and bottoms of the concrete columns, or webs, connecting the slabs. The key to correcting this problem is to increase the shear strength. In order to increase the shear strength of the structure, horizontal shear area must increase. R70(100)-D-F has the largest horizontal shear area as it also shows stronger strength. As a result, shear strength ($V_{nh}$) is dependent on the horizontal shear area (N). $V_{nh}={\alpha}{\times}0.16{\sqrt{f_{ck}}}{\frac{{\pi}D^2}{4}}{\times}N({\alpha}=1.8125)$. The web columns have a shear span to depth ratio (a/d) that is less than 2; which classifies it as a deep beam. In this case, however, the shear strength of the deep beams may be as much as 2 to 3 times greater than that predicated conventional equations developed for members of normal proportions. As a result, ${\alpha}$ is suggested as an extra coefficient in the equation for shear strength ($V_{nh}$).

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.25-37
• /
• 2000

As computer systems of high capacity and high performance recently emerged, various researches about GISs(Geographic Information Systems) have been in progress and many GIS applications have also been developed. From the domestic situation where many people are using mobile devices, because of the recent advances in the mobile technology, we can infer that the time will come when every individual will carry a mobile device with a GPS(Global Positioning System) module resulting from the development of a miniature GPS Module. Therefore, a mobile GIS that can allows users to deal with dynamic GIS data management and perform their tasks while moving will be required. This paper discusses the design and implementation of a mobile GIS using the shareware DBMS, called postgresSQL. The Mobile GIS in which a mobile concept is utilized at the GIS data server makes it possible to insert, delete, update GIS data, to zoom in and zoom out displayed maps, and to locate the user's position on the client device. Therefore, It is possible to manage dynamic GIS data in order to deal with GIS data on the maps while moving, connect various GIS data servers through the middleware, and connected with ITS (Intelligent Transport System) which is one of applications of the Mobile GIS developed in this paper.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.109-120
• /
• 2016

Flexural tests of full-scale concrete-filled U-shape hybrid composite beams were conducted. Ordinary (SS400) and high-strength (SM570) steel plates were used in the web and in the bottom flange of U-shape steel section respectively. The primary objectives were to develop the hybrid section configuration with maximized flexural capacity and to investigate its flexural strength and deformation capacity. All the hybrid test specimens in this study exhibited the plastic moment capacity and resonable deformability. It is shown that the plastic stress distribution can be assumed in calculating the flexural strength of the proposed hybrid composite beams if the plastic neural axis is located within 15% of the total beam depth from the top of the composite slab. The procedure for computing the effective flexural stiffness of hybrid composite beams is also recommended based on test results.

• Communications of Mathematical Education
• /
• v.29 no.4
• /
• pp.573-588
• /
• 2015

In this paper, we introduce development process and application of a simple and effective model of a statistics laboratory using open source software R, one of leading language and environment for statistical computing and graphics. This model consists of HTML files, including Sage cells, video lectures and enough internet resources. Users do not have to install statistical softwares to run their code. Clicking 'evaluate' button in the web page displays the result that is calculated through cloud-computing environment. Hence, with any type of mobile equipment and internet, learners can freely practice statistical concepts and theorems via various examples with sample R (or Sage) codes which were given, while instructors can easily design and modify it for his/her lectures, only gathering many existing resources and editing HTML file. This will be a resonable model of laboratory for studying statistics. This model with bunch of provided materials will reduce the time and effort needed for R-beginners to be acquainted with and understand R language and also stimulate beginners' interest in statistics. We introduce this interactive statistical laboratory as an useful model for beginners to learn basic statistical concepts and R.

• Journal of Internet Computing and Services
• /
• v.2 no.2
• /
• pp.71-93
• /
• 2001

Commonly to design a database system. a conceptual database has to be designed and then it is transformed into a logical database schema prior to building a target database system. This paper proposes a method which transforms a Temporal Entity-Relationship Model(TERM) into a Temporal Object-Oriented Model(TOOM) to build an efficient database schema. I formalize the time concept in view of object versioning and specify the constraints required during transformation procedure. The proposed transformation method contributes to getting the logical temporal data from the conceptual temporal events Without any loss of semantics, Compared to other approaches of supporting various properties, this approach is more general and efficient because it is the semantically seamless transformation method by using the orthogonality of types of objects, semantics of relationships and constraints over roles.