• 대한조선학회지
• /
• 제5권2호
• /
• pp.35-44
• /
• 1968

The longitudinal cut method of experimental ship wave analysis, originally developed by J.N. Newman, is presented and various plausible sources of error are discussed. A further use of autocorrelation function and crosscorrelation function when two wave systems are superposed is indicated.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.79-105
• /
• 1994

A ship in waves is suffered from the various wave loads that comes from its motion throughout its life. Because these loads are dynamic, the analysis of a ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship motion calculation as a rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, compared with ship's depth, induce the large ship motion, so the ship section configuration under waterline is rapidly changed at each time. This results in a non-linear problem. Considering above situation in this paper, a strength analysis method is introduced for the hull girder among waves considering non-linear hydrodynamic forces. This paper evaluates the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom flare impact forces by momentum slamming theory. For numerical calculation a ship is idealized as a hollow thin-walled box beam using thin walled beam theory and the finite element method is used. This method applied to a 40,000 ton double hull tanker and attention is paid to the influence of the response of the ship's speed, wave length and wave height compared with the linear strip theory.

• 한국해안·해양공학회논문집
• /
• 제30권4호
• /
• pp.180-190
• /
• 2018

파랑 중 횡 방향으로 운동하는 투과성 진자판을 파랑에너지를 차단과 추출을 동시에 하는 복합 시스템으로 활용하는 기초 연구를 수행하였다. Porter and Evans(1995)가 제안한 Galerkin 방법을 사용하여 투과성 진자판에 대한 회절과 방사 문제를 풀어 반사율과 투과율, 운동변위, 그리고 추출파워를 구하였다. Galerkin 방법은 고유함수전개법 보다 수렴성이 좋기 때문에 짧은 계산시간에도 불구하고 정확한 해를 주었다. 투과성 진자판이 불투과성 진자판 보다 파랑에너지 추출과 차단 측면에서 모두 효과적이라고 말할 수는 없지만 파랑 하중을 줄일 수 있고 해수 교환이 가능하다는 장점은 지니고 있다.

• 한국항해항만학회지
• /
• 제48권3호
• /
• pp.192-199
• /
• 2024

연안에서 발생하는 월파는 고파랑에 의한 대표적인 자연재해 중 하나이며, 태풍 시 발생하는 월파는 연안침수의 주요 원인으로 작용한다. 최근의 연안역은 사회적·경제적 수요의 증가로 연안을 따라 주거지역 및 상업지역이 집중되고 있어 장기적인 해수면의 상승 및 태풍 빈도의 증가 등으로 인한 연안재해의 위험성이 지속적으로 지적되어 왔다. 지금까지 월파량은 주로 실내 수리모형실험을 통해 구조물의 마루 높이를 초과하는 수괴를 집수함을 통해 직접 수집하여 계측시간의 평균월파량으로 평가해 왔다. 본 연구에서는 실해역에서 발생하는 월파를 정량적으로 평가하기 위한 관측시스템의 개발을 목표로 월파고의 시간변동을 이용하여 개별 월파량을 추정하는 방법을 제안하였다. 우리나라 해안에 많이 설치된 사석경사제를 대상으로 수리모형실험을 수행하였으며, 월파 발생 시 구조물 마루에서 발생하는 범람유속을 장파유속으로 가정한 월파유량계수를 도입하고 월파고로부터 월파량을 예측하여 실험결과와 비교·검토하였다. 그 결과, 본 연구에서 도출된 월파유량계수를 월파고에 적용하여 월파량 추정이 가능함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.548-549
• /
• 2014

Omni-directional shear-horizontal magnetostrictive patch transducers have a disadvantage that magnetic flux leakage into the plate when it is installed on a ferromagnetic plate. The leakage produces poor transduction efficiency and unwanted wave mode excitation which should be avoided in guided wave inspections of large plate-like structures. In order to resolve these problems, we newly developed a method to reduce the leakage into the plate. In the method, the patch and the magnet are vertically lifted off and their optimal positions are determined by numerical simulations. Also, the verification of the developed method is successfully verified by experiments.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.31-35
• /
• 2001

By applying the Boundary Integral Equation Method (BIEM) to obliquely incident for Rubble Mound Breakwater (RMB), wave reflection and transmission the coefficients are studied numerically. The validity of and the present BIEM is confirmed by comparing it with 1)numerical results of the eigenfunction expansion method of Dalrymple et al.(1991), and 2)numerical results of the BIEM of Kojima et al.(1988). Therefore, the characteristics of RMB for obliquely incident waves are investigated according to the variations of the wave period, equivalent linear nondimensional friction coefficient and direction of incident waves. It is revealed that the wave transformations of obliquely incident waves are different from those of normally incident waves.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.26-33
• /
• 2006

A sonar dome is basically designed and installed to protect sonar array from shocks, sea wave slaps and floating matters. The acoustic wave passing through sonar dome, however, can be distorted in magnitude and phase. This paper presents a numerical method for predicting the steady-state sound pressure on the surface of transducer array in the sonar dome and typical results of sonar beam pattern affected by sonar dome. A beam tracing model with phase information and a multi-layered elastic boundary model are involved. A full three-dimensional sonar dome is modeled as a GRP acoustic window, a rubber coated steel baffle and a rubber coated steel hull. A transducer array is modeled as thick steel cylinder. There are some assumptions such as incidence of plane wave, specular reflection on boundary and directionality of transducer element.

• 한국항해학회지
• /
• 제20권2호
• /
• pp.97-107
• /
• 1996

The method of Electromagnetic Wave Immunity Test is continuously endeavored by IEC and CISPR as international unification, but it has not been established yet. The main reason is why it is difficult to obtain the measurement method and normalization of threshold to find out the complicated parameters for Electromagnetic Wave immunity Test. So far, thus, the Electromagnetic Wave Immunity Test is carried out case by case as the electromagnetic environment, which is set up Electromagnetic Wave Immunity Test. This study has developed an algorithm and measurement software suitable for IEC1000-4 Regulations, where a ready-made Amplifier, and Signal Generator have been used and an interconnecting Interface Board has been constructed for connecting with the other apparatuses, i.e., RF Switch, Power Meter, Field Sensor, Pre-Amp., etc. Therefore, we have achieved the aim to develop an automated software using OOP method and the measurement system.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.230-235
• /
• 2014

Two-step quadrature phase-shifting digital holography based on the calculated intensity of a reference wave is proposed. In the Mach-Zehnder interferometer (MZI) architecture, the method only records two quadrature-phase holograms, without reference-wave intensity or object-wave intensity measurement, to perform object recoding and reconstruction. When the reference-wave intensity is calculated from the 2D correlation coefficient (CC) method that we presented, the clear reconstruction image can be obtained by some specific algorithm. Its feasibility and validity were verified by a series of experiments with 2D objects and 3D objects. The presented method will be widely used in real-time or dynamic digital holography applications.

• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.18-27
• /
• 1996

The feasibility of using stress-wave technique in the transverse direction for the assessment of early stages of decay was investigated using compression test specimens having different annual ring orientations subjected to decay by Tyromyces palustris for various time intervals. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, and stress-wave elasticity) and their percent reduction due to decay, measured by stress-wave technique in the transverse direction. The use of stress-wave technique in the transverse direction for the application of this technique to structural members in service is desirable, when considering the easiness of attachment of accelerometers of stress-wave measuring device on the surface of members and also accurate detection of localized decayed areas. In stress-wave technique in the transverse direction, stress-wave parameters measured were different according to the angles between wave propagation path and annual ring, due to the anisotropy of wood structure. Therefore, it is recommended to use percent reduction in stress-wave parameters instead of stress-wave parameters. This evaluation method using percent reduction in stress-wave parameters is ideal when it is impossible to observe annual ring orientation on the transverse surface of wood.