• 한국조경학회지
• /
• 제25권4호
• /
• pp.18-29
• /
• 1998

This study was carried out to test the theory of planned behavior in recreational choices behavior. Lotte World was chosen as study area, and college students were selected by nonprobability sampling for two waves of data collection. The first wave of data were collected one weeks into the spring semester : intention, attitude, subjective norm, and perceived behavioral control were measured. To collect the data of the second wave, the same resondents were asked their behavior, one week data of the second wave, the same respondents were asked their behavior , one week prior to the final examination : whether they visited the Lotte World or not. Polychoric correlation among variables were calculated by the PRELIS because behavior was nominal variable. Then, weighted least square method was utilized to calibrate structural equation model by the LISREL version 7.2. Structural link effect on intention among three determinants : the direct effect on intention was 0.421 and the indirect effect via intention on behavior was 0.145, respectively. However, its effect on behavior was insignificant because actual control over 'visiting of Lotte World' was relatively high. A few comments were sugested on data collection, and inclusion of new variables was discussed for the sufficiency f the theory of planned behavior.

• 한국재료학회지
• /
• 제30권7호
• /
• pp.327-332
• /
• 2020

Laser induced surface activation (LISA) technology requires refined selection of process variables to fabricate conductive microcircuits on a general polymer material. Among the process variables, laser mode is one of the crucial factors to make a reliable conductor pattern. Here we compare the continuous wave (CW) laser mode with the pulse wave (PW) laser mode through determination of the surface roughness and circuit accuracy. In the CW laser mode, the surface roughness is pronounced during the implementation of the conductive circuit, which results in uneven plating. In the PW laser mode, the surface is relatively smooth and uniform, and the formed conductive circuit layer has few defects with excellent adhesion to the polymer material. As a result of a change of laser mode from CW to PW, the value of Ra of the polymer material decreases from 0.6 ㎛ to 0.2 ㎛; the value of Ra after the plating process decreases from 0.8 ㎛ to 0.4 ㎛, and a tight bonding force between the polymer source material and the conductive copper plating layer is achieved. In conclusion, this study shows that the PW laser process yields an excellent conductive circuit on a polymeric material.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권3호
• /
• pp.174-180
• /
• 2010

변동 수심에서의 파랑변형을 비균질 Helmholtz 방정식을 이용하여 계산하였다. 포텐셜 함수가 존재한다고 가정하였으며, 변수분리를 적용하였다. 본 논문에서는 조화파만을 고려하였다. 포텐셜 함수로 구성된 지배방정식을 정수면에 직접 적용하였고, 변동 수심에 대한 비균질 Helmholtz 방정식을 얻었다. 파랑의 진폭과 위상차로 얻어진 복합 포텐셜 함수의 지배방정식을 실수형 변수로 된 두 방정식으로 분리하였다. 분리된 방정식들은 각각 1차와 2차 상미분 방정식이며, 이 방정식들을 단순한 형태의 중앙차분 수치기법을 이용하여 차분식으로 변형하였다. 측면 경계조건에서의 파랑의 진폭, 진폭경사, 그리고 위상경사를 경계면에 적용하여 전방진행방법으로 전 영역에서 해를 구하였다 Booij의 경사면 있는 저면의 경우와 Bragg의 물결모양이 있는 저면의 경우에 적용하였다. 본 연구로 도출된 비균질 Helmholtz 방정식은 완전 선형방정식 계산 결과, Massel의 수정 완경사 방정식, 그리고 Berkhoff의 완경사 방정식의 적용 결과와 비교하였으며, 만족스러운 결과를 얻었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.860-864
• /
• 2004

This article discusses the use of pulse-echo ultrasonic testing for the stress analysis of adhesive bonds between metal sheets. The method is based on the measurement of the reflection wave at the metal/adhesive interface. After describing briefly the physical aspects of the phenomenon, an index is defined to detect defective zone of the joint(both for the lack of adhesive and for insufficient adhesion); the influence of the experimental variables(variables stress...) on the measurement is discussed. By means of a control experiment it is shown that Stress Variation in Adhesive Joints are separate to be distingguished. In this paper, Quantitative Nondestructive Evaluation in Adhesive Joints are together with Ultrasonic Testing and Finite Element Method.

• 대한전기학회논문지
• /
• 제34권9호
• /
• pp.361-367
• /
• 1985

A new injection method is proposed for active power filters to eliminate AC harmonics in ac input current of nonlinear loads such as rectifiers. By injecting the PWM current determined by the proposed injection method, all the harmonics up to order nn can be eliminated to exactly zero. This PWM injection current can be generated by sampling total harmonic wave at the rate of M and the sampled values are converted into the proposed PWM wave with N pulse-width variables and adjustable current magnitude Im. These variables are deetermined by solving a set of N nonlinear harmonic equations and the harmonic-elimination characteristics of the new injection are investigated through digital computer sinmulation. Also by comparing between the simulated results and the ones synthesized by data stored in EPROM, the possibility of the suggested injection method can be shown.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.232-235
• /
• 2007

A comprehensive numerical study was carried out to identify the on-set condition of the cell structures of oblique detonation waves (ODWs). Mach 7 incoming flow was considered with all other flow variables were fixed except the flow turning angles varying from 35 to 38. For a given flow conditions theoretical maximum turning angle is $38.2^{\circ}$ where the oblique detonation wave may be stabilized. The effects of grid resolution were tested using grids from $255{\times}100$ to $4,005{\times}1,600$. The numerical smoked foil records exhibits the detonation cell structures with dual triple points running opposite directions for the 36 to 38 turning angles. As the turning angle get closer to the maximum angle the cell structures gets finer and the oscillatory behavior of the primary triple point was observed. The thermal occlusion behind the oblique detonation wave was observed for the $38^{\circ}$ turning angle.

• Journal of Ship and Ocean Technology
• /
• 제4권2호
• /
• pp.1-12
• /
• 2000

The present study concentrates on the weak-scatterer hypothesis for the nonlinear wave-body interaction problems. In this method, the free surface boundary conditions are linearized on the incoming wave profile and the exact body motion is applied. The considered problems are the diffraction problem near a circular cylinder and the ship response in oblique waves. The numerical method of solution is a Rankine panel method. The Rankine panel method of this study adopts the higher-order B spline basis function for the approximation of physical variables. A modified Euler scheme is applied for the time stepping, which has neutral stability. The computational result shows some nonlinear behaviors of disturbance waves and wave forces. Moreover, the ship response shows very close results to experimental data.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.1-13
• /
• 1997

In this research, and investigation of the eye movement was performend when the objects perceived by the eye are three-dimensional objects, two dimensional images, and trhee dimensional images. This investigation was done by observing the EQG(Electro- oculogram) waves which were obtained from experiments. The observed waves were categorized into several groups. Differences among the waves were analyzed for each object and image perceived by the eye. In order to obtain waves for analysis, two kinds of experiments were performen. In each experiment, the saccadic eye movement and the smooth pursuit eye movement were considered as an independent variables. Waves obtained from the experiments were categorized into 4 types (Wave-1, Wave-2, Wave-3, Wave-4) depending on their characteristics. Unlike the other images, three dimensional image was revealed as a key factor for the active movement of the eye. Futhermore, a unique eye movement was observed in the case of three dimensional images where the focus of the eye was achieved through three steps.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.529-545
• /
• 2016

In this article, the generalized coupled non-Fickian diffusion-thermoelasticity analysis is carried out using an analytical method. The transient behaviors of field variables, including mass concentration, temperature and displacement are studied in a strip, which is subjected to shock loading. The governing equations are derived using generalized coupled non-Fickian diffusion-thermoelasticity theory, which is based on Lord-Shulman theory of coupled thermoelasticity. The governing equations are transferred to the frequency domain using Laplace transform technique and then the field variables are obtained in analytical forms using the presented method. The field variables are eventually determined in time domain by employing the Talbot technique. The dynamic behaviors of mass concentration, temperature and displacement are studied in details. It is concluded that the presented analytical method has a high capability for simulating the wave propagation with finite speed in mass concentration field as well as for tracking thermoelastic waves. Furthermore, the obtained results are more realistic than that of others.

• 한국지구과학회지
• /
• 제38권3호
• /
• pp.173-181
• /
• 2017

The stability of the steady Rossby-Haurwitz wave (R-H wave) in the nondivergent barotropic model (NBM) on the sphere was investigated with the normal mode method. The linearized NBM equation with respect to the R-H wave was formulated into the eigenvalue-eigenvector problem consisting of the huge sparse matrix by expanding the variables with the spherical harmonic functions. It was shown that the definite threshold R-H wave amplitude for instability could be obtained by the normal mode method. It was revealed that some unstable modes were stationary, which tend to amplify without the time change of the spatial structure. The maximum growth rate of the most unstable mode turned out to be in almost linear proportion to the R-H wave amplitude. As a whole, the growth rate of the unstable mode was found to increase with the zonal- and total-wavenumber. The most unstable mode turned out to consist of more-than-one zonal wavenumber, and in some cases, the mode exhibited a discontinuity over the local domain of weak or vanishing flow. The normal mode method developed here could be readily extended to the basic state comprised of multiple zonalwavenumber components as far as the same total wavenumber is given.