• 한국임상수의학회지
• /
• 제17권2호
• /
• pp.359-367
• /
• 2000

The aim of this study was to evaluate the effects of propofol on cortical electroencephalogram (EEG) in seven dogs. Propofol infusion was accomplished from low concentration to high concentration in series, and each concentration was infused for 20 minutes (M0: 0, M0.5: 0.5, M1.0:1.0, and M1.5: 1.5 mg/kg/min of infusion rate). EEG was recorded via needle electrode placed at Cz, which was applied to International 10-20 system. Arterial blood pressure. blood gas analysis and ECG were also measured. Hoemodynamics, Pa$CO_2$, PaO$_2$, heart rate and respiratory rate were variable, but were net significant(p>0.05). The power spectra of EEG in every concentration was compared wish those of control (MO). The powers at a1l frequencies at M1.0 and Ml.5 were decreased. Especially, the powers of the frequencies over 20 Hz were significantly decreased (p<0.O5). Powers at frequencies between 8 and 15Hz at MO.S were significantly increased (p<0.05) in response to the painful stimuli. It was inferred that they may reflect activity of the brain which is consciously processing the external Stimuli. Like the Power spectra, al1 the band powers of He EEG ($\delta$ 1-4, $\theta$4-8, $\alpha$ 8-13, $\beta$L13-21. $\beta$H 21-30, \ulcorner 30-50, and total 1-5OHz) were decreased in proportion to the increase of infusion rate at M1 .0 and M1.5. Especially, decrease of $\beta$H and ${\gamma}$ were significant(p<0.01). At M0.5, $\alpha$ band was significantly increased(p<0.05) among all the bands. Seizure activities which were concide with occurrence of spike wave were shown in all dogs at Ml .0 and M1.5.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.255-261
• /
• 2005

Recently, the RF inductive discharge or inductively coupled plasma continues to attract growing attention as an effective plasma source in many industrial applications, the best known of which are plasma processing and lighting technology. To the point of lighting sources, the ring-shaped electrodeless fluorescent lamps utilizing an inductively coupled plasma have been objects of interest and research during the last decades, mainly because of their potential for extremely long life, high lamp efficacies, rapid power switching response. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. The electromagnetic field in the ferrite core was shown to be high and symmetric. An LS-100 luminance meter and a Darsa-2000 spectrum analyzer were used in the experiment. According to data on the lamp tested using high magnetic field ferrite, the optical and thermal wave fields were shown to be high around the ring-shaped electrodeless fluorescent lamp. The optical or light field was high at the center of the bulb rather than around the ferrite core. The light conditions of the bulb were assumed to be complex, depending on the condition of the filler gas, the volume of the bulb, and the frequency of the inverter. Our results have shown coupling between the gas plasma and the field of the light emitted to be nonlinear.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.39-47
• /
• 2001

본 논문에서는 매트형 거대 부유식 구조물의 동적 응답을 모드중첩법을 이용하여 시간영역에서 해석하였다. 동유체력의 시간기억함수는 고차경계요소법으로 계산한 동유체감쇠력을 푸리에변환하여 구하였으며, 구조물의 동적 응답은 해석적으로 유도한 고유 모드를 시간적분하여 산정하였다. 해석법을 검증하기 위하여 집중하중이 순간적으로 제거되는 경우, 집중하중이 충격적으로 가해지는 경우, 그리고 집중하중이 등속으로 일정거리를 움직인 경우 등 3가지에 대하여 계산을 수행하였다. 이렇게 얻은 수치결과는 3가지 경우 모두 모형에 대한 실험치와 잘 일치하였다.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.217-223
• /
• 2015

In order to predict the motions of a planing hull in waves, it is necessary to accurately estimate the force components acting on the hull such as the hydrodynamic force, buoyancy, and friction, as well as the wave exciting force. In particular, based on strip theory, hydrodynamic forces can be estimated by the summation of the forces acting on each cross-section of the hull. A non-linear strip method for planing hulls was mathematically developed by Zarnick, and his formula has been used to predict the vertical motions of prismatic planing hulls in regular waves. In this study, several improvements were added to Zarnick's formula to predict the vertical motions of warped planing hulls. Based on calm water model test results, the buoyancy force and moment correction coefficients were modified. Further improvements were made in the pile-up correction. Pile-up correction factors were changed according to variations of the deadrise angles using the results found in previous research. Using the same hull form, captive model tests were carried out in other recent research, and the results were compared with the present calculation results. The comparison showed reasonably good agreements between the model tests and present calculations.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.197-200
• /
• 2002

기존 DGPS는 고가의 장비인 RF방식의 무선 모뎀을 사용함으로써 사용자의 무선국 허가, 전파의 지리적 장애물에 의한 영향, 전송거리의 제한, 주파수 혼신, 주파수 자원의 유한성 등의 문제점이 있다. 따라서 본 논문에서는 이런 문제점을 해결하기 위해서 각 DGPS 수신기의 무선 모델을 대체할 수 있는 방법으로 휴대전화를 이용한 DGPS 수신기와의 보정신호 전송기법을 제안하고, DGPS 수신기와 휴대전화 간의 연동을 위한 IM(Interface Module)의 개발에 관한 연구이다. IM은 DGPS 수신기와 휴대전화 간의 인터페이스 모듈로서 RS-232 포트와 모뎀 통신 제어를 통한 보정신호의 전송을 가능하게 한다. 기준국의 IM은 DGPS 수신기와 휴대전화를 통해 이동국에 보정신호를 전송하기 위하여 RS-232 포트와 모뎀을 초기화하고 응답 모드로 대기하며, 이동국의 IM은 RS-232 포트와 모뎀을 초기화 한 후 기준국과 연결(Hand Shaking)를 요구하고, 연결 선정이 완료된 후 송수신 된 보정신호를 이용하여 이동국은 상대 측위를 통한 정화한 측위가 이루어진다.

• 한국항해항만학회지
• /
• 제36권3호
• /
• pp.215-223
• /
• 2012

플로팅 함체의 강성변화가 상부 철골모멘트연성골조에 미치는 영향을 확인하기 위해 함체의 높이를 1.5m, 2.0m, 2.5m로 변화시키면서 파랑하중 3초에서 15초에 대하여 동적 유체 해석과 그에 따른 파력을 산정하고 정적 구조 해석을 수행하였다. 해석결과, RAO-피치와 상부 골조의 모멘트 증가량이 선형적인 관계이고 함체의 곡률이 구조물의 강성과 반비례함을 확인하였다. 이러한 선형적 결과를 종합하여, 임의의 함체에 대한 상부골조의 해석 결과를 이용하여 함체 높이가 다른 경우에도 상부 골조의 모멘트를 추정하는 절차를 제안하였으며, 추정결과가 해석결과와 상당히 잘 일치함을 확인하였다.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.240-247
• /
• 2013

Hydrodynamic characteristics of a planing craft are very sensitive to the hull form variations, especially when the craft navigates with high-speed. Therefore, we need to verify hydrodynamic performances of the craft during the process of hull form design. In this paper, motion performances of a 40ft class cruise leisure boat are evaluated by both model tests and theoretical analyses using two different methods. Model tests are carried out at calm sea and regular wave conditions using high speed towing carriage installed in SNU towing tank. Theoretical methods used are a empirical method proposed by Martin (1976) and a potential method based on Rankine panel (DNV, 2010). The results from the theoretical methods are compared with and verified by those of model tests. Results of empirical formula showed somewhat larger motion RAOs and resonant frequencies than those of model tests. Potential based method showed even larger discrepancies with the model test results. From the analyses of comparison results, we could confirm the limitation of each theoretical method and suggest the way of improvement for the better prediction of motion performances.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.248-251
• /
• 2017

본 논문에서는 $360^{\circ}$ 전방위 화각을 가진 Dash Camera의 EMI 대응을 위한 보드 설계를 제안한다. 제안된 보드는 DM 및 CM 입력 노이즈 감소회로를 설계하고 능동 EMI 필터 결합회로를 적용하여 개발한다. DM 및 CM 입력 노이즈 감소회로 설계부분에서는 기생적 커패시턴스(CP)을 통해 입력 신호로 커플링된 DM 잡음을 얻기 위한 차동연산 증폭기 회로를 사용한다. 능동 EMI 필터 결합회로를 적용하여 설계하는 부분에서는 회로의 간략화를 위하여 EMI 소스의 노이즈를 분리하여 보상해 주기 위하여 노이즈 분리기를 설치하여 CM과 DM 능동필터를 동시에 보상한다. 제안된 EMI 대응을 위한 보드의 성능을 평가하기 위하여 공인 인정기관에서 실험한 결과, 각각의 주파수 대역에 따른 전자파 인증규격이 만족됨을 확인하였다.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.102-112
• /
• 2017

Many studies on dynamic positioning control algorithms using fixed feedback gains have been carried out to improve station keeping performance of dynamically positioned vessels. However, the control algorithms have disadvantages in that it can not cope with changes in environmental disturbances and response characteristics of vessels motion in real time. In this paper, the Fuzzy Gain Scheduling - PID(FGS - PID) control algorithm that can tune PID gains in real time was proposed. The FGS - PID controller that consists of fuzzy system and a PID controller uses weighted values of PID gains from fuzzy system and fixed PID gains from Ziegler - Nichols method to tune final PID gains in real time. Firstly, FGS - PID controller, control allocation algorithm, FPSO and environmental disturbances were modeled using Matlab/Simulink to evaluate station keeping performance of the proposed control algorithm. In addition, simulations that keep positions and a heading angle of vessel with wind, wave, current disturbances were carried out. From simulation results, the FGS - PID controller was confirmed to have better performances of keeping positions and a heading angle and consuming power than those of the PID controller. As a consequence, the proposed FGS - PID controller in this paper was validated to have more effectiveness to keep position and heading angle than that of PID controller.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.591-595
• /
• 2010

Conventional methods of model evaluation usually rely only on model performance based on a comparison of simulated variables to corresponding observations. However, this type of model evaluation has been criticized because of its insufficient consideration of the various uncertainty sources involved in modeling processes. This study aims to propose an extended model evaluation method using multiple assesment indices (MAIs) that consider not only the model performance but also the model structure and parameter uncertainties in rainfall-runoff modeling. A simple reservoir model (SFM) and distributed kinematic wave models (KWMSS1 and KWMSS2 using topography from 250m, 500m, and 1km digital elevation models) were developed and assessed by three MAIs for model performance, model structural stability, and parameter identifiability. All the models provided acceptable performance in terms of a global response, but the simpler SFM and KWMSS1 could not accurately represent the local behaviors of hydrographs. In addition, SFM and KWMSS1 were structurally unstable; their performance was sensitive to the applied objective functions. On the other hand, the most sophisticated model, KWMSS2, performed well, satisfying both global and local behaviors. KMSS2 also showed good structural stability, reproducing hydrographs regardless of the applied objective functions; however, superior parameter identifiability was not guaranteed. Numerous parameter sets could lead to indistinguishable hydrographs. This result supports that while making a model complex increases its performance accuracy and reduces its structural uncertainty, the model is likely to suffer from parameter uncertainty. The proposed model evaluation process can provide an effective guideline for identifying a reliable hydrologic model.