• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.60-61
• /
• 2000

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.52-58
• /
• 2014

The development of efficient systems for water quality improvement for water sources such as lakes, dams and reservoirs has become a necessity to provide not only a cleaner and safer water to the urban society, but also to provide a cleaner and safer environment for the aquatic organisms living in lakes, dams and reservoirs. This study concentrates on the outlet design and internal flow analysis of an axial flow pump used in a floating type water treatment system completely powered by renewable energy source. The treatment system is designed to raise water from depths of about 3~5m up to the water surface where it is naturally mixed with air as it is released back to the reservoir. The outlet of a typical axial flow pump is modified to suit the floating type water mixer. The performance of the axial flow pump is studied by investigating the internal flow of the system. Results show that the change in outlet shape does not alter the performance of the original pump at the maximum efficiency point as long as the cross sectional area of inlet is the same as the outlet. The axial pump for floating type water treatment system has good cavitation performance in the whole flow passage.

• 청정기술
• /
• 제18권4호
• /
• pp.446-450
• /
• 2012

격막식 전해조에서 전해질(염화나트륨, 탄산칼륨 등)을 첨가시킨 수용액을 전해하여 음극에서 생산되는 강알카리성 전해수는 세정효과가 있고, 친환경적이어서 화학적 세정제의 대체물질로 검토되고 있다. 일본에서는 일부 자동차나 정밀부품업계 등에서 세정제로 사용되고 있다. 격막식 전해조를 사용하여 강알카리성전해수를 생산할 경우 필연적으로 양극에서 강산성전해수가 생성된다. 생성되는 강산성전해수는 용도를 찾지 못할 경우 배출되어 폐기되므로 결과적으로 전해수의 생산효율이 저하된다. 또한 격막의 오염으로 인하여 전해효율이 저하되는 단점이 있다. 이러한 단점을 보완하고자 전극반응실과 희석실이 일체화된 무격막 일체형 전해조를 사용하고 전해질의 조성을 변화시키면서 강알카리성전해수를 생성하였으며, 이의 물성 및 특성을 확인하였다. 격막식 전해조에서 생산된 강알카리성전해수와 일체형 전해조에서 생산된 강알카리성전해수의 물성을 비교한 결과 산화환원전위(oxidation reduction potential, ORP), 염소농도에서 차이가 관찰되었다. 계면활성력을 확인하기위한 유화시험에서도 유사한 결과를 얻었으며 이로부터 무격막 일체형 전해조에서 생산된 강알카리성 전해수는 격막식 전해조에서 생산된 강알카리성 전해수처럼 세정용도로 사용 가능함을 확인하였다. 방청력 시험에서는 격막식 전해조에서 생산된 강알카리성 전해수가 우수함을 확인하였다. 무격막 일체형 전해조에서 생산된 강알카리성 전해수는 격막식 전해조에서 생산된 강알카리성 전해수와 달리 유효염소를 함유하고 있어 살균력을 보유하고 있을 것으로 사료된다.

• 분석과학
• /
• 제37권1호
• /
• pp.1-11
• /
• 2024

In agricultural households cultivating vegetables and fruits, the use of various pesticides to protect crops from diseases and pests or to control weeds is widely practiced enhancing quality and productivity. However, pesticides can pose a threat to consumer health by remaining on the food surface or migrating into the food interior. Households commonly peel off skins, wash with water, or use chemical methods to remove foreign substances including residual pesticides on the food surface. In this study, we measured the washing rate by comparing the pesticide concentrations before and after washing in the leafy vegetable perilla leaves and the fruits strawberries and apples, which were intentionally exposed to pesticides. We compared washing rates using tap water, a baking soda solution, and a commercially available food-specific cleaning solution. The target pesticides for analysis were azoxystrobin, bifenthrin, boscalid, difenoconazole, flubendiamide, and indoxacarb, and the residual pesticide analysis was performed using GC-MS/MS or LC-MS/MS. The removal rates of pesticides were highest with the food-specific cleaner, followed by baking soda and tap water in order.

• International Journal of Fluid Machinery and Systems
• /
• 제7권3호
• /
• pp.125-129
• /
• 2014

The paint removal and recoating are the very important process in airplane maintenance. The traditional technology is to use the chemical way corroding the paint with paint remover. For changing the defects, corrosion & pollution & manual working, of the traditional technology, the physical process which removes the paint of airplane with 250MPa/250kW ultra-high pressure rotary water jetting though the surface cleaner installed on the six axes robot is studied. The paint layer of airplane is very thin and close. The contradiction of water jetting paint removal is to remove the paint layer wholly and not damage the surface of airplane. In order to solve the contradiction, the best working condition must be reached through tests. The paint removal efficiency with ultra-high pressure and move speed of not damaged to the surface. The move speed of this test is about 2m/min, and the paint removal efficiency is about $30{\sim}40m^2/h$, and the paint removal active area is 85-90%. No-repeat and no-omit are the base requests of the robot program. The physical paint removal technology will be applied in airplane maintenance, and will face the safety detection of application permission.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.358-359
• /
• 2000

Statement of problem. Confusion about the relationship of surface characteristics of implant to osteoblast cell attachment. Purpose. This study attempted to bone cell attachment to the implant surface which was modified by heat. Material and methods. Commercially pure titanium grade 2, $4{\times}4mm$ sheet 40 pieces were treated for 10 minutes with ultrasonic cleaner with methylethyl ketone, ethanol, deionized distilled water, and half of the specimen 20 pieces were heat treated in $980^{\circ}C$ for 15 minutes. All 40 specimens were autoclaves. Total 6 dishes were prepared, 3 dishes were for control group, and the other 3 dishes were for heat treatment. In fourth day, cell account was done. Conculsion. The change of surface characterization by heat treatment could affect the cell attachment in the early stage however, the change of surface characterization would not be prolonged.

• 한국안광학회지
• /
• 제15권3호
• /
• pp.227-234
• /
• 2010

목적: 안경용 초음파세척기를 이용하여 소프트콘택트렌즈의 단백질 침전물 세척 효과와 콘택트렌즈의 변수에 미치는 영향을 조사하였다. 방법: 단백질을 오염시킨 etafilcon A 재질의 소프트콘택트렌즈를 다목적용액에 넣어 안경용 초음파세척기와 콘택트렌즈용 초음파세척기를 사용하여 세척하고 대조군의 콘택트렌즈는 다목적용액으로 세척한 후 콘택트렌즈에 남아있는 단백질을 추출하여 정량하였고 콘택트렌즈의 전체지름, 베이스커브, 중심두께, 도수 및 함수율의 변화를 측정하였으며 주사전자현미경(scanning electron microscope)으로 콘택트렌즈 표면을 관찰하였다. 결과: 단백질을 오염시킨 etafilcon A 재질의 콘택트렌즈는 다목적용액에 의해 6.08%의 세척효과를 보였고, 다목적용액에 콘택트렌즈를 넣고 초음파세척기로 세척한 경우에는 시간에 따라 안경용 초음파세척기에서는 23.73~33.92%, 콘택트렌즈용 초음파세척기에서는 0~12.99%의 세척효과를 보였다. 결론: 안경용 초음파세척기로 세척한 콘택트렌즈에서 변수 및 표면 변화는 관찰되지 않았다. 결론: 안경원에서 사용하는 안경용 초음파세척기는 소프트콘택트렌즈의 단백질 침전물 제거에 효과적이고 변수 변화를 유발하지 않아 안경원에서 진단용 소프트렌즈의 세척에 활용될 수 있을 것으로 사료된다.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.91-96
• /
• 2024

Recently, extensive studies have been carried out to enhance various performance aspects such as the durability, lifespan, and hardness by combining diverse materials or developing novel materials. The utilization of superhydrophobic surfaces, particularly in the automotive, textile, and medical device industries, has gained momentum to achieve improved performance and efficiency. Superhydrophobicity refers to a surface state where the contact angle when water droplets fall is above 150°, while the contact angle during sliding motion is smaller than 10°. Superhydrophobic surfaces offer the advantage of water droplets not easily sliding off, maintaining a cleaner state as the droplets leave the surface. Surface modification involves two fundamental steps to achieve superhydrophobicity: surface roughness increase and surface energy reduction. However, existing methods, such as time-consuming processes and toxic organic precursors, still face challenges. In this study, we propose a method for superhydrophobic surface modification using lasers, aiming to create roughness in micro/nanostructures, ensuring durability while improving the production time and ease of fabrication. The mechanical durability of superhydrophobic samples treated with lasers is comparatively evaluated against chemical etching samples. The experimental results demonstrate superior mechanical durability through the laser treatment. Therefore, this research provides an effective and practical approach to superhydrophobic surface modification, highlighting the utility of laser treatment.

• 디지털융복합연구
• /
• 제20권5호
• /
• pp.547-557
• /
• 2022

해양 유류오염 및 유출량 증가에 따라 방제능력을 추가로 확보에는 많은 위험이 있다. 현재 해역에 배치된 방제선을 재배치하여 유휴능력을 개선하고 부족한 해역에 배치하고자 하고자 해양오염지수를 도출하고 해역별 해양오염지수 대비 방제능력을 비교하여 방제선 배치의 적절성을 검증하였다. 해양오염을 유발하는 항목에 대한 해역별 수치에 전문가 집단에서 도출한 가중치를 곱하여 해양유류 오염위험지수를 도출하였다. 해역별 해양오염 위험지수(F) 대비 방제능력(A)이 부족한 해역은 목포(F:13.4, A:1.9), 부산(F:14.3, A:6.4), 여수(F:21.5, A:16.6)이고, 여유있는 해역은 마산(F:5.9, A:13.3), 군산(F:1.7, A:8.3), 제주(F:2.7, A:6.9)이다. 따라서 해양오염 위험도에 비례한 평준화된 방제능력을 제고하기 위해 방제능력 여유 해역인 마산, 군산, 제주의 방제선을 방제능력 부족해역인 목포, 부산, 여수으로 재배치되어야 함을 시사한다.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.239-246
• /
• 2015

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.