DOI QR코드

DOI QR Code

Effect of cavitation on surface damage of 16.7Cr-10Ni-2Mo stainless steel in marine environment

해양 환경 하에서 16.7Cr-10Ni-2Mo 스테인리스강의 표면 손상에 미치는 캐비테이션의 영향

  • Chong, Sang-Ok (Division of Marine Engineering, Mokpo National Maritime University) ;
  • Han, Min-Su (Division of Marine Engineering, Mokpo National Maritime University) ;
  • Kim, Seong-Jong (Division of Marine Engineering, Mokpo National Maritime University)
  • 정상옥 (목포해양대학교 기관시스템공학부) ;
  • 한민수 (목포해양대학교 기관시스템공학부) ;
  • 김성종 (목포해양대학교 기관시스템공학부)
  • Received : 2015.06.16
  • Accepted : 2015.10.16
  • Published : 2015.10.31

Abstract

Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of $30{\mu}m$ and seawater temperature of $25^{\circ}C$, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation.

Keywords

References

  1. T. Oshima, Y. Habara, and K. Kuroda, ISIJ Inter., 47, 359 (2007). https://doi.org/10.2355/isijinternational.47.359
  2. G. Okamoto, Corros. Sci., 13, 471 (1973). https://doi.org/10.1016/0010-938X(73)90031-0
  3. T. Momma and A. Lichtarowicz, Wear, 186, 425 (1995).
  4. A. J. Sedriks, Corrosion of stainless steels, 2nd ed. p. 115, John Wiley & Sons, New York (1996).
  5. D. A. Jones, Principles and prevention of corrosion, 2nd ed. p. 415, Prentice Hall, New Jersey (1996).
  6. I. R. Jones, and D. H. Edward, J. Fluid Mech., 7, 596 (1960). https://doi.org/10.1017/S0022112060000311
  7. C. MaCaul, Proceedings of the Corrosion 96 Research Topical Symposia, p. 24, NACE, Houston (1996).
  8. M. H. Im, Corros. Sci. Tech., 10, 218 (2011).
  9. ASTM Standard G32-92, Standard Method of Vibratory Cavitation Erosion Test, Annual Book of ASTM Standards, Philadelphia (1992).
  10. M. Qin, D. Y. Ju, and R. Oba, Surf. Coat. Technol, 201, 1409 (2006). https://doi.org/10.1016/j.surfcoat.2006.02.006
  11. J. C. Park and S. J. Kim, J. Kor. Inst. Surf. Eng., 45, 25 (2011).
  12. S. J. Kim, M. S. Han, and M. S. Kim, Corros. Sci. Tech., 11, 84 (2012).
  13. S. J. Kim and K. Y. Hyun, Corros. Sci. Tech., 11, 151 (2012). https://doi.org/10.14773/cst.2012.11.4.151
  14. K. Sato, H. Soyama, Y. Yamuchi, T. lkohagi, R. Oba, and R. Oshima, Proceedings of 11th International Conference on Jet Cutting Technology, p. 436, St. Andrews, Scotland (1992).
  15. P. Peyre, X. Scherpereel, L. Berthe, C. Carboni, R. Fabbro, G. Beranger, et al. Mater. Sci. Eng., A208, 294 (2000).
  16. K. Masaki, Y. Ochi, and A. Ishii, Mater. Sci. Res. Int., 4, 200 (1998).
  17. S. J. Kim, K. Y. Hyun, and S. K. Jang, Curr. Appl. Phys., 12, S24 (2012).
  18. S. K. Jang, S. O .Chong, M. S. Han, and S. J. Kim, J. Kor. Inst. Surf. Eng., 45, 278 (2012). https://doi.org/10.5695/JKISE.2012.45.6.278
  19. H. Mochizuki, M. Yokota, and S. Hattori, Wear, 262, 522 (2007). https://doi.org/10.1016/j.wear.2006.06.011
  20. G. Bregliozzi, A. Di Schino, S. I. U. Ahmed, J. M. Kenny, and H. Haefke, Wear, 258, 503 (2005). https://doi.org/10.1016/j.wear.2004.03.024