• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.862-867
• /
• 2013

Since the industrial revolution, seawater has increased in temperature and acidity due to the increase in anthropogenic carbon dioxide in the atmosphere. To understand the effect of elevated $CO_2$ on the early life stages of fish, we reared fertilized eggs of black sea bream Acanthopagrus schlegelii under three $CO_2$ concentrations (400, 850 and 1550 ppm) for 3 weeks. The standard length and wet weight of black sea bream larvae declined with enhanced $CO_2$ concentration in the rearing water (P<0.05). However, chemical analysis using ICP-OES on internal tissues of black sea bream larvae indicated that the whole-body calcium concentration increased with $CO_2$ concentration in the rearing water. These conflicting results suggest that future experiments should examine the acid-base balance to investigate the formation of bone and otolith during larval growth.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.3
• /
• pp.109-113
• /
• 1999

The objective of this research was to develop growth media for artificial ground by blending calcined clay and coconut peat. To achieve this, aggregates of clay particles were mixed with disel oil and heated to high temperature(1150~120$0^{\circ}C$) to expand clays. The particle sizes of expanded clay were controlled to 2~5mm in diameter. Then expanded clayes were mixed with coconut peat and changes of soil physicochemical properties and their effect on plant growth of Hedera L. were determined. The infiltration rate of calcined clay was very high, but the water holding capacity, the cation exchange capacity(CEC), and the nutrient contents were low. The characteritics of coconut peat was vice verse to calcined clay. This indicates that the mixture of calcined clay and coconut peat have the better characteristics than each material. As compared to mineral soil, the infiltration rate, the water holding capacity, the CEC and the nutrient contents increased, but bulk density decreased to about 1/4. And, Hedera L. grown in the mixture of calcined clay and coconut peat(6:4, v/v) had higher plant height, longer leaf length, more total number of leaves per plant and fresh weight than that grown in mineral soil, but statistical differences were not observed between two treatments.

• Smart Structures and Systems
• /
• v.9 no.1
• /
• pp.71-104
• /
• 2012

In this research, a typical tension-leg type of floating platform incorporated with an innovative concept of underwater tuned liquid column damper system (UWTLCD) is studied. The purpose of this study is to improve the structural safety by means of mitigating the wave induced vibrations and stresses on the offshore floating Tension Leg Platform (TLP) system. Based on some encouraging results from a previous study, where a Tuned Liquid Column Damper (TLCD) system was employed in a floating platform system to reduce the vibration of the main structure, in this study, the traditional TLCD system was modified and tested. Firstly, the orifice-tube was replaced with a smaller horizontal tube and secondly, the TLCD system was combined into the pontoon system under the platform. The modification creates a multipurpose pontoon system associated with vibration mitigation function. On the other hand, the UWTLCD that is installed underwater instead would not occupy any additional space on the platform and yet provide buoyancy to the system. Experimental tests were performed for the mitigation effect and parameters besides the wave conditions, such as pontoon draught and liquid-length in the TLCD were taken into account in the test. It is found that the accurately tuned UWTLCD system could effectively reduce the dynamic response of the offshore platform system in terms of both the vibration amplitude and tensile forces measured in the mooring tethers.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.89-94
• /
• 1999

In this study small glass columns with 2.5cm inner diameter and 24.5cm length were used as many as the sample numbers to study the effects of initial pH, temperature, dissolved oxygen concentration, and sediment depth on the release of phosphorus from lake sediment. No phosphorus release occurred at $10^{\circ}C$ with all pHs, and release rate at $25^{\circ}C$ was higher than that at $35^{\circ}C$ with pH 4 and reverse trends were observed at pH 7 and 10. Under all conditions, DO concentrations were decreased and equilibrium was obtained after 4-8 days when phosphorus release started and the Do concentrations were less than 1 mg/l. Sediment depth had little effect on phosphorus release rate. It was found that relation between released SRP(Soluble Reactive Phosphorus) concentration and time was zero order reaction and reaction rate coefficients were obtained. The amount of phosphorus release from lake sediment can be predicted by considering these k values.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.2 s.110
• /
• pp.57-63
• /
• 2005

Microflute has several advantages of production cost and strength compared to board. Production technology of microflute has not been fully explored. Therefore suitability of corrugating medium for microflute shape formation was analyzed by measuring (1) lengths of corrugating medium before flute formation, (2) those after flute formation but before conditioning and (3) those after flute formation and after conditioning. The suitability of corrugating medium was better when the length change before and after conditioning after flute formation was smaller, because flute sustained its form. The suitability of corrugating medium for microflute shape formation was better when the flute height after flute formation was higher. The suitability of corrugating medium was analyzed depending on properties of corrugating medium in terms of fiber bonding strength and paper stiffness. For better microflute shape formation and its preservation it was found that fiber bonding should be increased, proper stiffness was required, and resistance to water absorption from surroundings should be increased.

• Journal of Aquaculture
• /
• v.20 no.4
• /
• pp.265-269
• /
• 2007

We studied the effects of temperature on the egg development and larvae of Takifugu pardalis. The larvae hatched 135-480 hr after fertilization in $13^{\circ}C-24^{\circ}C$ and 32 ppt. The higher the temperature the earlier the larvae hatch within $13^{\circ}C-24^{\circ}C$. The maximum hatching rate was made in $15^{\circ}C$ and 32 ppt. The higher the temperature the larger the newly hatched larvae. The larvae hatched in $24^{\circ}C$ were ca. 3.35 mm in total length. Occurrence of the deformed larvae was lower in $13^{\circ}C-18^{\circ}C$ regime and higher over $21^{\circ}C$ regime.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.6
• /
• pp.119-133
• /
• 2013

The purpose of this study is to develop riverbed techniques to activating ecological function of hyporheic zone. Hyporheic zone maybe simply defined as an active eco-tone between surface water and groundwater, which facilitates to exchange water, nutrients and aquatic habitat occur in response to variation in discharge and bed geomorphology. The aim of this study is to evaluate the effectiveness of an applied riverbed technique for two years since its installation in the hyporheic zone. The experimental riverbed technique has been implemented on Anyang stream penetrating Anyang city in Gyunggi province. The dimension of the installed structure is 5.0 m in width, 46 m in length. Bottom layer is filled with rip-rap covered with gabion. After the implementation of the technique, the study conducts follow-up monitoring in two years of between 2011 and 2012. The results of follow-up monitoring for two years are as follows:1) In Hydro geomorphic process, the riverbed technique maintains hydraulic stability despite of several flood events in 2011, 2012. 2) After transformation to form pool-and-riffle habitat, for aquatic community composed of freshwater fish, macro invertebrate, and attached algae, the species diversity and population gradually increased. 3) The riverbed technique achieved desired effect on enhancement of ecological function in hyporheic zone.

• Macromolecular Research
• /
• v.15 no.2
• /
• pp.160-166
• /
• 2007

Novel multiblock copolymers, based on segmented sulfonated hydrophilic-hydrophobic blocks, were synthesized and investigated for their application as proton exchange membranes. A series of segmented sulfonated poly(arylene ether sulfone)-b-polyimide multiblock copolymers, with various block lengths, were synthesized via the coupling reaction between the terminal amine moieties on the hydrophilic blocks and naphthalene anhydride functionalized hydrophobic blocks. Successful imidization reactions required a mixed solvent system, comprised of NMP and m-cresol, in the presence of catalysts. Proton conductivity measurements revealed that the proton conductivity improved with increasing hydrophilic and hydrophobic block lengths. The morphological structure of the multiblock copolymers was investigated using tapping mode atomic force microscopy (TM-AFM). The AFM images of the copolymers demonstrated well-defined nanophase separated morphologies, with the changes in the block length having a pronounced effect on the phase separated morphologies of the system. The self diffusion coefficient of water, as measured by $^1H$ NMR, provided a better understanding of the transport process. Thus, the block copolymers showed higher values than Nafion, and comparable proton conductivities in liquid water, as well as under partially hydrated conditions at $80^{\circ}C$. The new materials are strong candidates for use in PEM systems.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.9-16
• /
• 2000

This paper deals with the numerical and experimental study on the characteristics of the flow around a sunken vessel. Numerical simulation of the two dimensional steady flow on the midship section are carried out by the CFD code which is developed by using finite volume method and which includes the standard $textsc{k}$-$\varepsilon$ model with standard wall function. A experimental study is also carried out for the 1/100 scale model in circulating water channel. A velocity fields around the ship are measuremed by using particle image velocimetry technique. And the fluid forces acting on the ship hull by uniform current are measured by two axis load cell. The computed and measured velocity fields on the midship section are compared with each other in the view point of velocity dstribution and reattachement length, which shows good agreement in quality. The drag force on the vessel also showed the same tendency in both computational and experimental results. However, the quantitative disagreements are shown due to the three dimensional effect of the experiment. The result are used to determine the functional efficiency and stability of the vessel as a artificial reef.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1400-1405
• /
• 2004

Experimental study is performed to investigate the effect of heat load and operating temperature on the thermal performance of a heat pipe with screen mesh wick. The heat pipe was designed in 200 screen meshes, 500mm length and 12.7mm O.D tube of copper, water as working fluid(4.8g) and nitrogen as non-condensible gas(NCG). The heat pipe used in this study has evaporator, condenser and adiabatic section, respectively. Experimental data of axial wall temperature distribution is presented for heat transport capacity, the temperature of cooling water of condenser, inclination angle, and operating temperature. For the results from this study, it is found that, for the same charging mass of working fluid, the initial operating temperature and the overall wall temperatures of heat pipe are higher for NCG charging mass of $5.0{\times}10^{-6}kg$ and $3.4{\times}10^{-6}kg$, than that of $1.0{\times}10^{-6}kg$.