• 제목/요약/키워드: water leakage detection

검색결과 93건 처리시간 0.027초

전기비저항탐사 방법에 의한 지중 저장 이산화탄소 누출 가능 경로 탐지 (Detection of Potential Flow Paths of Leaked CO2 from Underground Storage Using Electrical Resistivity Survey)

  • 임우리;함세영;황학수;김성욱;전항탁
    • 지질공학
    • /
    • 제28권1호
    • /
    • pp.69-79
    • /
    • 2018
  • 한국 정부는 온실효과에 대응하기 위해서 이산화탄소 배출을 850.6 Mt에서 2030년까지 314.7 Mt (37%)로 감축하기로 하였다. 이러한 상황에서, 한국 정부는 이산화탄소 지중저장시설로부터 누출되는 이산화탄소를 시함부지 규모로 연구하기 위하여 2014년에 이산화탄소 지중저장 환경관리연구단(K-COSEM)을 발족하였다. 이산화탄소의 누출을 탐지하기 위해서는 대산지역의 수리지질학적, 지구물리학적 특성을 규명하는 것이 필요하다. 본 연구에서는, 충북 음성군 대소면 내산리의 연구부지에서 2017년 6월 28일부터 7월 24일과 8월 7일부터 9월 11일까지 두 차례에 걸쳐서 각각 $CO_2$$SF_6$를 용해시킨 물을 지하에 주입하여 지하에서의 이산화탄소 누출 거동을 알아내고자 하였다. 주입정은 심도 24 m, 케이싱은 21 m까지, 스크린 구간은 심도 21~24 m 구간이다. 2017년 8월 18일과 9월 1일의 두 차례 전기비저항탐사로 주입수의 흐름과 전기비저항 특성을 파악하고자 하였다. 연구 결과에 의하면, 고 전기비저항대와 저 전기비저항대가 뚜렷하게 구별되며, 주입수의 유동방향은 자연상태의 지하수 흐름과 비슷하게 나타났다. 또한, 저 전기비저항대는 주입심도로부터 천부 표토층까지 광범위하게 형성되며, 이는 높은 투수성을 가지는 풍화대가 이산화탄소 누출 가능성이 높다는 것을 지시한다.

상수관망에서 수압모니터링지점 선정방법 (Determination Methods of Pressure Monitoring Location in Water Distribution System)

  • 권혁재
    • 한국수자원학회논문집
    • /
    • 제46권11호
    • /
    • pp.1103-1113
    • /
    • 2013
  • 본 연구에서는 상수관망의 수압모니터링지점 선정방법을 제시하고 이를 모의하기 위해 단순화된 샘플관망에 적용하여 최적위치를 선정하였다. 또한, 최적의 수압모니터링지점 선정방법을 도출하고 실제 도시의 상수관망에 적용하여 모니터링 지점을 선정해보았다. 모니터링 지점선정방법은 크게 세 가지로 구분하여 계산하였다. 먼저 조도계수 변화로 인한 민감도분석, 유량변화로 인한 압력기여도분석과 민감도분석을 통하여 모니터링 지점을 선정하였다. 그리고 부정류 해석결과를 이용한 압력기여도분석과 민감도분석결과를 정류해석결과와 비교하였다. 결과를 통하여 가장 효과적이고 간편한 방법을 선정하였고 실제 상수관망에 적용하였다. 본 연구에서 제시된 모니터링 지점선정방법은 상수관망의 유지관리는 물론 누수탐지를 위한 수압관리 모니터링 지점선정방법으로 활용이 가능할 것으로 판단된다.

방류수의 방사능 오염 측정을 위한 배열형 SiPM 기반 방사선 검출 센서 제작 (Development of Radiation Sensor Based on Array SiPM for Measurement of Radioactive Contamination in Effluent)

  • 김정호;박혜민;주관식
    • 센서학회지
    • /
    • 제27권4호
    • /
    • pp.232-236
    • /
    • 2018
  • A radiation detection sensor was developed and characterized by combining three types of CsI(Tl) scintillators and an array-type SiPM to detect the radioactive contamination of discharged water in real time. The characterization results showed that type 3 exhibited the most desirable characteristics in response linearity (R-square: 0.97889) according to detection sensitivity and incident radiation dose. Furthermore, in terms of spectral characteristics, type 3 exhibited 16.54% at 0.356 MeV (the emission gamma ray energy of $^{133}Ba$), 10.28% at 0.511 MeV (the emission gamma ray energy of $^{22}Na$), 9.68% at 0.356 MeV (the emission gamma ray energy of $^{137}Cs$), and 2.55% and 4.80% at 1.173 MeV and 1.332 MeV (the emission gamma ray energies of $^{60}Co$), respectively. These measurements confirmed the good energy characteristics. The results were used to evaluate the spectral characteristics and energy linearity in a mixed source using type 3 with the best detection characteristics. It was confirmed that the gamma ray peaks of $^{133}Ba$, $^{22}Na$, $^{137}Cs$, and $^{60}Co$ were well resolved. Moreover, it was confirmed that R-square, which is an indicator of energy linearity, was 0.99986. This indicates a good linearity characteristic. Based on this study, further commercialization studies will contribute to measurements in real time and to the management of the contamination caused by radioactive wastewater or radioactive material leakage, which originate from facilities that use radioactive isotopes or care facilities.

기상조건별 비산먼지 관리체계 최적화 연구 (Optimization of Fugitive Dust Control System for Meteorological Conditions)

  • 김현구
    • 한국대기환경학회지
    • /
    • 제21권6호
    • /
    • pp.573-583
    • /
    • 2005
  • Fugitive dust, which is emitted in the ambient air without first passing through a stack or duct designed to control flow, is frequently generated by means of wind erosion from storage yards at Pohang Steel Wokrs. The size distribution of fugitive dust is mostly in the range of coarse particulate which is deposited as soon as emitted and less harm to human health; however $20\%$ of fugitive dust contains PM 10 known as one of most harmful airborne pollutant. Consequently, effective control and reduction of fugitive dust is strongly requested by the local society, but it is not easy so far because the generation and dispersion of fugitive dust highly depends on meteorological conditions, and it being occurred for irregularity. This research presented a fugitive dust control system for each meteorological condition by providing statistical prediction data obtained from a statistical analysis on the probability of generating the threshold velocity at which the fugitive dust begins to occur, and the frequency occurring by season and by time of the wind direction that can generate atmospheric pollution when the dispersed dust spreads to adjacent residential areas. The research also built a fugitive dust detection system which monitors the weather conditions surrounding storage yards and the changes in air quality on a real-time basis and issues a warning message by identifying a situation where the fugitive dust disperses outside the site boundary line so that appropriate measures can be taken on a timely basis. Furthermore, in respect to the spraying of water to prevent the generation of fugitive dust from the storage piles at the storage yard, an advanced statistical meteorological analysis on the weather conditions in Pohang area and a case study of fugitive dust dispersion toward outside of working field during $2002\∼2003$ were carried out in order to decide an optimal water-spraying time and the number of spraying that can prevent the origin of fugitive dust emission. The results of this research are expected to create extremely significant effects in improving surrounding environment through actual reduction of the fugitive dust produced from the storage yard of Pohang Steel Works by providing a high-tech warning system capable of constantly monitoring the leakage of fugitive dust and water-spray guidance that can maximize the water-spraying effects.

Effect of growth phase of cyanobacterium on release of intracellular geosmin from cells during microfiltration process

  • Matsushita, Taku;Nakamura, Keisuke;Matsui, Yoshihiko;Shirasaki, Nobutaka
    • Membrane and Water Treatment
    • /
    • 제6권3호
    • /
    • pp.225-235
    • /
    • 2015
  • During low-pressure membrane treatments of cyanobacterial cells, including microfiltration (MF) and ultrafiltration (UF), there have reportedly been releases of intracellular compounds including cyanotoxins and compounds with an earthy-musty odor into the water, probably owing to cyanobacterial cell breakage retained on the membrane. However, to our knowledge, no information was reported regarding the effect of growth phase of cyanobacterial cells on the release of the intracellular compounds. In the present study, we used a geosmin-producing cyanobacterium, Anabaena smithii, to investigate the effect of the growth phase of the cyanobacterium on the release of intracellular geosmin during laboratory-scale MF experiments with the cells in either the logarithmic growth or stationary phase. Separate detection of damaged and intact cells revealed that the extent of cell breakage on the MF membrane was almost the same for logarithmic growth and stationary phase cells. However, whereas the geosmin concentration in the MF permeate increased after 3 h of filtration with cells in the logarithmic growth phase, it did not increase during filtration with cells in the stationary phase: the trend in the geosmin concentration in the MF permeate with time was much different between the logarithmic growth and stationary phases. Adsorption of geosmin to algogenic organic matter (AOM) retained on the MF membrane and/or pore blocking with the AOM were greater when the cells were in the stationary phase versus the logarithmic growth phase, the result being a decrease in the apparent release of intracellular geosmin from the stationary phase cells. In actual drinking water treatment plants employing membrane processes, more attention should be paid to the cyanobacterial cells in logarithmic growth phase than in stationary phase from a viewpoint of preventing the leakage of intracellular earthy-musty odor compounds to finished water.

A* 알고리즘을 이용한 기관실 순찰로봇의 최단 경로 탐색에 관한 연구 (Study on the Shortest Path finding of Engine Room Patrol Robots Using the A* Algorithm)

  • 김선덕
    • 해양환경안전학회지
    • /
    • 제28권2호
    • /
    • pp.370-376
    • /
    • 2022
  • 기술의 발전으로 스마트 선박과 관련된 다양한 연구가 진행되고 있으며, 기관실을 무인으로 순찰할 수 있는 기관실 순찰 로봇도 이러한 연구 중의 하나이다. 순찰로봇은 인공지능을 통해 학습된 정보를 기반으로 기관실을 이동하며 기기 정상 유무 및 누수, 누유, 화재 등의 이상 유무를 파악한다. 기관실 순찰로봇에 관한 연구는 인공지능을 이용한 객체 검출에 관한 연구가 주로 진행되고 있으나, 순찰로봇의 이동 및 제어에 관한 연구는 부족한 상황이다. 이는 순찰로봇이 객체를 검출하더라도 검출한 객체까지 이동할 방법이 없다는 문제를 야기한다. 이에 본 논문에서는 기관실 이상상황 발생 시 빠르게 이상 유무를 파악할 수 있는 기동성을 확보하기 위해, A* 알고리즘을 적용하여 순찰로봇이 최단경로를 탐색할 수 있는지를 확인하였다. 라이다를 장착한 소형차를 이용하여 선박 기관실을 주행하며 데이터를 얻어, SLAM으로 매핑하여 지도를 만들었다. 매핑한 지도에서 순찰로봇의 출발 지점과 목표 지점을 설정하고, A* 알고리즘을 적용하여 출발 지점부터 목표 지점까지 최단 경로를 탐색하는지를 확인하였다. 시뮬레이션 결과 매핑된 지도에서 출발 지점부터 목표 지점까지의 장애물을 회피하며 최단 경로를 잘 탐색함을 확인 할 수 있었으며, 기관실 순찰로봇에 적용하면 선박안전에 도움이 될 것으로 사료된다.

Studies on the Sorption and Fixation of Cesium by Vermiculite (II)

  • Lee, Sang-Hoon
    • Nuclear Engineering and Technology
    • /
    • 제6권2호
    • /
    • pp.97-111
    • /
    • 1974
  • 천연 점토 광물질의 ion교환능은 비교적 낮지만, 여러가지 황성화법에 의하여 교환능의 개설이 기대된다. 본 연구에 있어서는 점토 광물질 중에서도 교환 흡착능이 비교적 큰 vermiculite를 사용하여 저준위 방사성 액체 폐기물을 처리하는데 있어서 효과적인 이용 방법을 검토하기 위하여 vermiculite의 이온교환 기능에 관한 기초 연구를 실험하였다. Cs 이온의 교환능 및 분배계수는 Cs-l37의 방사능도를 Scintillation counter로 측정하였고, 천연 및 활성화된 vermiculite에 대한 특성은 X-ray회절과 전자회절에 의한 분석 및 열시차 분석과 아울러 전자 현미경에 의한 검사에 의거 해석하였다. Na-vermiculite에 의한 Cs이온의 교환 및 흡착에 있어서는 결정격자의 C-axis spacing의 수축을 초래하게 되고, Cs이온의 교환능은 주로 C-axis spacing의 크기에 좌우된다고 본다. Na-vermiculite에 의한 Cs이온의 교환 및 흡착 연구를 수행함으로서 저준위 방사성 핵종의 처리 분만 아니라, 고 방사성 폐액 저장 tank의 외각 충진 물질로서 Cs-137과 같이 반감기가 긴 핵종의 leakage로 인한 지하수 오염을 방지할 수 있는 재질로서도 적합하다.

  • PDF

목장형 유가공장의 미생물 분석 및 저감기술 적용 평가 (Evaluation of Microbial Analysis and Application of Reduction Technology in a Dairy Factory)

  • 김종희;이은선;김부민;함준상;오미화
    • Journal of Dairy Science and Biotechnology
    • /
    • 제41권4호
    • /
    • pp.203-210
    • /
    • 2023
  • Bacterial contamination negatively affects the quality, functionality, and safety of dairy products. Adherent populations of bacteria, referred to as biofilms, grow on the surfaces of dairy processing equipment and are the primary cause of dairy contamination. In addition, microorganisms present in the farm environment and dairy factory can contaminate the Clear-In-Place (CIP) line through raw milk transport pipes; therefore, exhaustive management is required. In dairy manufacturing facilities, biofilm formation is controlled using CIP systems that primarily require sodium hydroxide and nitric acid. However, the leakage or incomplete removal of these potently active compounds can be harmful to humans. In the present study, we compared the eradication of Escherichia coli and other bacteria using commercially available combinations of sodium hypochlorite (NaClO) and citric acid, which are recognized by the Korean Ministry of Food and Drug Safety (MFDS) as food disinfectants. When considered in the CIP system of the field manufacturing process, E. coli was not detected (compared to detection before treatment), and other bacteria were detected at 0-32 culture-forming units (CFU)/cm2. The residual amount of chlorine ions after CIP treatment was similar to that in tap water, and there was no significant difference in the overall components of the fermented dairy products. Therefore, the NaClO/citric acid CIP system can be safely applied in dairy manufacturing processes.

하수관거 배면 공동 탐지를 위한 충격반향법의 적용성 평가 (Assessment of Impact-echo Method for Cavity Detection in Dorsal Side of Sewer Pipe)

  • 송석민;김한섭;박두희;강재모;최창호
    • 한국지반공학회논문집
    • /
    • 제32권8호
    • /
    • pp.5-14
    • /
    • 2016
  • 싱크홀 발생의 주요 원인인 하수관거 배면의 공동 탐지를 위해 비파괴검사 방법 중 하나인 충격반향법을 적용한 실내 모형 실험을 수행하였다. 콘크리트 하수관의 모의를 위해 얇은 두께의 콘크리트 평판 시험체를 제작하였고 주변지반은 모래로 조성하였으며 공동의 모사를 위해 스티로폼 박스를 모래에 매립하였다. 콘크리트 판 배면이 공동인 경우와 완전히 모래에 밀착된 경우로 나누어 실험이 진행되었으며 일정한 타격 강도의 유지를 위해 새롭게 제작된 타격 장치를 사용하여 획득 자료의 신뢰성을 높였다. 측정된 반사파는 고속 푸리에 변환과 국소 푸리에 변환을 사용하여 주파수 특성 및 시간 특성을 분석하였다. 그 결과, 푸리에 스펙트럼의 형상으로는 공동의 유무를 판별할 수 없는 것으로 나타났다. 본 연구에서는 공진 시간이라고 명한 새로운 지표를 제안하였다. 이는 공진 주파수가 일정 강도를 초과하는 지속 시간으로 정의하였다. 공진 시간은 공동의 유무를 효과적으로 예측하는 것으로 나타났다. 나아가 공동유무를 구분할 수 있는 공진 시간을 제시하였다. 실제 현장 조건에서의 검증과 보다 광범위한 적용성의 확보를 위해 다양한 지반 조건에 대한 추가 실험과 실제 하수관에 대한 현장 실험 등을 진행할 예정이다.

딥러닝 기반 지하공동구 제어반 문열림 인식 (Deep Learning-based Object Detection of Panels Door Open in Underground Utility Tunnel)

  • 김경환;김지은;정우석
    • 한국재난정보학회 논문집
    • /
    • 제19권3호
    • /
    • pp.665-672
    • /
    • 2023
  • 연구목적: 지하공동구는 도시 지하에 전기, 수도, 가스 등의 인프라를 공동 수용하는 시설로 공기 흐름이 부족하여 계절에 상관없이 결로가 자주 발생한다. 결로는 전기 설비의 누전 화재를 일으키는 원인이 되므로 지하공동구 내의 조명 등 각종 시설물 관리를 위해 필요한 제어반은 결로에 노출되지 않도록 문이 닫힌 상태로 관리되어야 한다. 본 논문에서는 딥러닝 객체인식 기술을 활용하여 수km 거리에 반복 배치된 공동구 제어반의 문 열림 여부를 이동 카메라 조건과 조명이 꺼진 조건에서도 인식하고자 한다. 연구방법: 지하공동구를 순찰하는 로봇이 촬영한 영상데이터를 이용하여 딥러닝 객체인식 모델인 YOLO를 모자이크 이미지 증강기법으로 학습시켜 제어반 문 열림과 문 닫힘을 인식한다. 연구결과: 모자이크 이미지 증강기법으로 학습시킨 모델과 사용하지 않은 모델의 성능을 비교한 결과, 모자이크 학습 모델이 더 우수한 성능(모든 클래스에 대한 mAP가 0.994 이상임)을 보이는 것을 확인하였다. 결론: 지하공동구의 조명이 꺼진 상태에서도, 공동구 내부 시설물이 복잡한 환경에서도 제어반의 문열림 여부를 우수한 성능으로 인식하여 지하공동구 재난안전관리에 도움이 될 것으로 기대된다.