• Water for future
• /
• v.8 no.1
• /
• pp.23-26
• /
• 1975

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.860-867
• /
• 2015

This paper presents a control method for energy cost saving in the water reuse pumping system. An optimize horizon switching strategy is proposed to implement an pump control. And Particle Swarm Optimization (PSO) algorithm is used to solve optimal problems in each time step. Energy costs are calculated for electricity on both TOU in the light, heavy, and maximum load time period and peak charges. The control method in water reuse pumping systems is determined to reduce the TOU cost. The simulation results show a energy cost saving for water reuse pumping systems.

• Journal of Ginseng Research
• /
• v.9 no.1
• /
• pp.1-8
• /
• 1985

Preventive effect of ginseng saponin fraction against ethanol intoxication of the liver of rats fed width 12% ethanol instead of water for 6 days was investigated. Control group was dosed 12% ethanol instead of water (free access) for 6 days and test group was dosed 0.1% ginseng saponin fraction in the 12% ethanol instead of water for 6 days. Normal rats was given only water freely. It was observed that the activities of alcohol dehydrogenase (ADH) and Microsomal ethanol oxidizing system (MEOS) of both control and test groups were higher than those of normal group while the activity of aldehyde dehydrogenate (ALDH) of control and test groups were lower than that of normal rats, However, the ALDH activity decrease of test group was much less than that of control groups. Electron micrograph showed that severely swollen and disrupted mitochondria and dilated and vesiculated ER can be seen in control group while dilated or vesiculated ER are very few and swollen or disrupted mitochondria can not be seen in test group. From the above experimental result, it seems that ginseng saponin might stimulate ethanol oxidation and the removal of acetaldehyde resulting in the decrease of ethanol intoxication of the liver.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.6
• /
• pp.106-112
• /
• 2014

Recently, tidal power generation has gained much attention. South Korea's tidal power generation systems were imported from abroad by turnkey type and have being operated. Therefore, for efficient operation and technological independence of a tidal power system, development of core technology is required. This paper deals with the start stop control system of water turbine generator in the tidal power plant, as one of our development project results. Using the SCADA system, the status and operations of water turbine generator in the tidal power plant, as well as simulation for calculation of maximum power were carried out. A small model type of start stop control device was also developed. In addition, the control system in Sihwa tidal power plant was modeled, and the results obtained by the dynamic simulation were given in graphics by 2D simulator.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.719-721
• /
• 1998

In this paper, we reviewed the steam temperature control in an once through boiler. The steam temperature control is very difficult. Generally, steam temperature of an once through boiler is not only controlled by boiler spray water flow, but also influenced by feed water flow and fuel flow. An advanced control strategy has been developed by experienced engineer. Specifically, We reviewed temperature control strategy for Taian power plant in this paper. This control strategy is represented by state control observer. This state control observer algorithm for temperature control has been used since the late 1980's. This paper describes control strategy employed and observed benefits from advanced steam temperature control.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.6
• /
• pp.136-147
• /
• 1998

An experimental facility consisting of two 3$\times$4.4$\times$2.8m rooms identical in construction is built. Each room has a control system and storage tank supplying hot water to the radiant floor heating system. The facility enables simultaneous comparison of two different control strategies each implemented in a separate room. The operating performance of three kinds of flow control scheme is tested and compared in this study: (ⅰ) conventional on-off control based on feedback from room air temperature (ⅱ) TPSC(two parameter switching control )(ⅲ) TPOC(two parameter on-off control). Results show that TPSC and TPOC using room air and surface temperature sequentially as feedback signal to control hot water supply is the better temperature regulation scheme than conventional control based on feedback from only room air temperature. They are good candidates for the room with radiant floor heating system under continuous and intermittent heating mode.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.403-408
• /
• 2001

In order to control hydration heat in mass concrete, pipe cooling method has been widely used. However, open pipe cooling system cannot be applied to the mass concrete structures when cooling water supply is difficult. To control hydration heat of high strength mass foundation, closed loop pipe cooling system was developed to solve the cooling water supply. This paper reports the performance result of hydration heat control with closed loop pipe cooling system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.381-381
• /
• 2012

Noise control in underwater environments is an entirely different beast from its airborne counterpart, partly because of the orders-of-magnitude difference in density and compressibility between water and air. One of the most popular systems ever used for (passive) noise reduction under water is an anechoic coating known as "alberich," which was developed by the German during the Second World War and are still used today in naval applications. This talk looks back on some recent developments in underwater noise control, ranging from acoustic metamaterials to active noise control techniques, specifically geared to achieving underwater invisibility.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.794-800
• /
• 2004

The purpose of this study is to propose a method of controlling freshwater algae which grows abundantly and forms water bloom in the eutrophic water body with $H_2O_2$. Both laboratory and field methodologies were used. For the laboratory test $H_2O_2$ was injected into the different growth phases of incubated Microcystis aeruginosa and the resulting algae growth control rate was examined. For the field test, $H_2O_2$ was dispersed into a lake. Lake water quality was evaluated using a pre-test and post-test analysis of chlorophyll-a, luminance, transmittance, etc., which allowed a comparative evaluation of water quality change. From the experimental results, the growth of algae can be controlled with the small amount of 1mg/L of $H_2O_2$ at the lag phase of growth. The field test results show that the green colour of lake water was removed completely by the reduction of chlorophyll-a and improved transmittance, luminance, TKN, TP, TOC and SS. These indicators of water quality were improved significantly after $H_2O_2$ injection. Toxicity test results using the lake fish show no evidence of detrimental effect of $H_2O_2$ up to 15mg/L. The results of $EC_{50}$ with P. phosphoreum show that the toxicity of $H_2O_2$ was negligible compared to copper which was commonly used for algae control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.644-651
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on water quality such as turbidity, temperature, pH and alkalinity. However, the process of chemical reaction to improve water quality (e.g., turbidity) by chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts using Jar-test data. In this paper, a systematic control strategy is proposed to derive the optimum dosage of coagulant, PAC(Polymerized Aluminium Chloride), using Jar-test results. A neural network model is developed for coagulant dosing and purifying process by means of six input variables (turbidity, temperature, pH, alkalinity of raw water, PAC feed rate, turbidity in flocculation) and one output variable, while considering the relationships to the reaction of coagulation and flocculation. The model is utilized to derive the optimum coagulant dosage (in the sense of minimizing turbidity of water in flocculator). The ability of the proposed control scheme validated through the field test has proved to be of considerable practical value.