• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.2
• /
• pp.89-93
• /
• 2008

Goldfish were exposed to radioactive isotope $^{18}F$, which is used for positron emission tomography (PET). $^{18}F$ is created when the oxygen in water combines with hydrogen on exposure to positrons accelerated by a cyclotron. The temporal change in intestine contractility was measured by physiograph after the exposure to $^{18}F$. The distance between the goldfish and 580 mCi of $^{18}F$ was approximately 4 cm and the exposure was for 4 hrs. The absorption level calculated from the distance, exposure time, and half-life of $^{18}F$ was approximately 2 Gy. The contractile activity of goldfish intestine was lowest on the first day and increased gradually to 100% of the control level by a period of between 5 and 36 days.

• Herbal Formula Science
• /
• v.19 no.1
• /
• pp.113-130
• /
• 2011

Objectives : This study was performed to investigate 93 prescriptions which are all affiliated Phlegm-Fluid Substances chapter depending on Symptoms in Dongeuibogam. Methods : The following conclusions are reached through investigations on the applications of prescriptions which are all affiliated Phlegm-Fluid Substances chapter Depending on Symptoms in Dongeuibogam. Results : 1. Fluid detention disease article represents that Byukeum(癖飮), Hyuneum(懸飮) and Yueum(流飮) have the same treat criteria, in effect, there is not any problem left in case it is reached fluid detention disease is not 8 but 6. 2. Strong water-utilization herbs can be mainly used in treating Fluid detention disease, eliminating phlegm warm herbs are almost used two times more than eliminating phlegm cold herbs in eliminating phlegm disease. 3. Arisamatis Rhizoma is only used by itself in Chongmongseok-hwan, the others are used at the same time with Pinelliae Rhizoma. As a result of this, Arisamatis Rhizoma has an effects on eliminating Wind relative dusease but eliminating phlegm disease which can cause upper body phlegm disease. 4. Fritillariae Cirrhosae Bulbus and Tricosanthis Radix are able to get rid of obstinate phlegm-Fluid disease in eliminating phlegm cold herbs. 5. Gamisachil-tang and Gamieejin-tang which are located in throat chapter are more proper prescriptions to treat phlegm at throat than Gwache-san or Jeoljehwadam-hwan which is located in Phlegm-Fluid Substances chapter in Dongeuibogam. 6. Glycyrrhizae Radix is used 46 times(49%) at total 93 prescriptions in eliminating phlegm disease herbs. It seems to be needed more study whether Glycyrrhizae Radix can control the Phlegm-Fluid disease or not. Conclusions : The 93 prescriptions for eliminating Phlegm-Fluid Substances in Dongeuibogam are mainly composed of Sobanha-tang, Eejin-tang and Baeksang-hwan, etc.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.224-232
• /
• 2014

PURPOSE. The purpose of the present study was to evaluate the effect of thermocycling and mechanical loading on the biaxial flexural strength and the phase transformation of one Ce-TZP/$Al_2O_3$ and two Y-TZP core materials. MATERIALS AND METHODS. Thirty disc-shaped specimens were obtained from each material. The specimens were randomly divided into three groups (control, thermocycled, and mechanically loaded). Thermocycling was subjected in distilled water for 10000 cycles. Mechanical loading was subjected with 200 N loads at a frequency of 2 Hz for 100000 times. The mean biaxial flexural strength and phase transformation of the specimens were tested. The Weibull modulus, characteristic strength, 10%, 5% and 1% probabilities of failure were calculated using the biaxial flexural strength data. RESULTS. The characteristic strengths of Ce-TZP/$Al_2O_3$ specimens were significantly higher in all groups compared with the other tested materials (P<.001). Statistical results of X-ray diffraction showed that thermocycling and mechanical loading did not affect the monoclinic phase content of the materials. According to Raman spectroscopy results, at the same point and the same material, mechanical loading significantly affected the phase fraction of all materials (P<.05). CONCLUSION. It was concluded that thermocycling and mechanical loading did not show negative effect on the mean biaxial strength of the tested materials.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.504-510
• /
• 2016

PURPOSE. Polyamide polymers do not provide sufficient bond strength to auto-polymerized resins for repairing fractured denture or replacing dislodged denture teeth. Limited treatment methods have been developed to improve the bond strength between auto-polymerized reline resins and polyamide denture base materials. The objective of the present study was to evaluate the effect of surface modification by acetic acid on surface characteristics and bond strength of reline resin to polyamide denture base. MATERIALS AND METHODS. 84 polyamide specimens were divided into three surface treatment groups (n=28): control (N), silica-coated (S), and acid-treated (A). Two different auto-polymerized reline resins GC and Triplex resins were bonded to the samples (subgroups T and G, respectively, n=14). The specimens were subjected to shear bond strength test after they were stored in distilled water for 1 week and thermo-cycled for 5000 cycles. Data were analyzed with independent t-test, two-way analysis of variance (ANOVA), and Tukey's post hoc multiple comparison test (${\alpha}=.05$). RESULTS. The bond strength values of A and S were significantly higher than those of N (P<.001 for both). However, statistically significant difference was not observed between group A and group S. According to the independent Student's t-test, the shear bond strength values of AT were significantly higher than those of AG (P<.001). CONCLUSION. The surface treatment of polyamide denture base materials with acetic acid may be an efficient and cost-effective method for increasing the shear bond strength to auto-polymerized reline resin.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.417-422
• /
• 2016

PURPOSE. The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS. Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples ($8{\times}8{\times}1mm$) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (${\alpha}=.05$). RESULTS. The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION. Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.254-259
• /
• 2007

The control of enzymic browning in potato slices by the use of citrate and phosphate buffer at different pH values and concentration was investigated. Minimally processed potatoes were stored at $5^{\circ}C$ and $20^{\circ}C$ followed by dipping in distilled water, citrate buffer (pH $3.0{\sim}5.0$) and phosphate buffer (pH $5.0{\sim}7.0$). The color characteristic was measured after storage at $5^{\circ}C$ and $20^{\circ}C$ for 24 hours. Treatment effectiveness was greatly improved by reducing pH and temperature. The citrate buffer was more effective than phosphate buffer in the browning inhibitory capacity. The citrate buffer (pH 3.0) showed the most anti-browning effect in this condition and more effective inhibition of browning by increasing concentration of treatment solution. The phosphate buffer (pH 5.0) treatment showed more effectiveness than concentration of 0.5 M of citrate buffer treatment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.3
• /
• pp.211-220
• /
• 2006

Need of porcelain-repair system is largely demanding as dental porcelain restorations are increased in clinical dentistry. This study investigated shear bond strength of commercial porcelain-repair systems on dental porcelain and their reliability. Experimental groups were as follows; Group A Super Bond C&B, Group B Porcelain repair kit, Group C Ceramic repair, and Group D Spectrum system as a control. Porcelain disks were fired and embedded in epoxy resin. Porcelain surface were ground using 220 grit SiC disk, then cleaned in ultrasonic bath. Then porcelain specimens were treated with each repair system. A clear polystyrene cylinder 3.5 mm in internal diameter was filled with composite resin. Then the resin cylinder was polymerized with a visible light curing unit. Thirty one specimens at each group were prepared and stored at $37^{\circ}C$ distilled water for 48 h. Specimens were tested in an Instron testing machine according to ISO TR 11405. Mean shear bond strength and standard deviation of each group was $15.7{\pm}4.1MPa$ (Group A), $12.8{\pm}4.9MPa$ (Group B), $7.2{\pm}3.0MPa$ (Group C) and $9.6{\pm}2.2MPa$ (Group D). ANOVA and Tukey HSD post-hoc test showed that there were significant differences between groups (p<0.05). Data of bond strength were analyzed with two-parameter Weibull distribution. Confidence interval of Weibull modulus (m-parameter) at 95% of Group A (3.5-6.3) and Group D (3.6-6.0) were significantly higher than Group B (2.2-3.7) and Group C (2.0-3.4). There was little correlation between mean shear bond strength and Weibull modulus. Results indicated that acid-etching of porcelain surface increased porcelain-resin shear bonding strength.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.193-197
• /
• 2010

In terms of the system efficiency, it is very useful to apply the ejector into the fuel recirculation system of a fuel cell system since the ejector needs no parasitic power to operate. Since the conventional automotive fuel cell use hydrogen and air as their fuel, the only hydrogen is needed to be recirculated for the better fuel efficiency. On the other hand, the submarine fuel cell needs both hydrogen and oxygen recirculation systems because the submarine drives under the sea. In particular, the cathodic recirculation has to meet the tougher target since the oxygen based pressurized stack generally used in the submarine applications generates the significant amount of the water in the stack during the operation. Namely, the oxygen utilization has designed less than 50% in the whole operating range for the better exhausting of the generated waters. And thereby in terms of the oxygen utilization, the entrainment ratio of the ejector should be more than 1 within the whole operating range. However, the conventional ejector using a constant nozzle can not afford to satisfy the mentioned critical requirement. To overcome the problem, the dual-ejector and its control strategy are designed. The performance of the proposed dual-ejector is verified by the experiments based on the real operating conditions of the target submarine system. Furthermore, the proposed design method can be used for the other fuel recirculation system of a large-scale fuel cell system with the critical requirement of the fuel utilization.

• Journal of the Korean Ceramic Society
• /
• v.32 no.12
• /
• pp.1357-1368
• /
• 1995

Nasigels of composition Na0.75Zr2PSi2O12 and Na3Zr2PSi2O12 have been synthesized by the sol-gel technique using metal alkoxide precursors. The monolithic dry gels of Na0.75Zr2PSi2O12 with no crack have been prepared by the control of the shrinkage rte, but gels of Na3Zr2PSi2O12 were impossible to prepare without cracking. The gels treated up to 80$0^{\circ}C$ led to the formtion of glass but the glasses were converted to the crystalline phases at above this temperature. Crystaline phases precipitated from the Na0.75Zr2PSi2O12 glass were NASICON-like phase, Na2Si2O5, and free Zirconia. Phase that precipitated from the Na3Zr2PSi2O12 was only rhombohedral NASICON. For Na0.75Zr2PSi2O12 gels, framework of PO4 tetrahedra and SiO4(PO4) tetrahedra formed at low temperature but changed to that of SiO4 and SiO4(PO4) tetrahedras as it were crystallized. In the case of Na3Zr2PSi2O12 gel, framework of isolated PO4 and SiO4 tetrahedras formed at low temperature but changed to SiO4(PO4) tetrahedra framework which usually formed in the NASICON crystal after crystallization at high temperature. The gels treated up to 80$0^{\circ}C$ contained the residual water. The ionic conduction was attributed to the motion of proton and Na+ ion at low (up to 150~20$0^{\circ}C$) and high temperatures, respectively. As the temperature of heat treatment increased, ionic conductivity gradaully increased with the extent of precipitation of crystalline phase.

• The Korean Journal of Malacology
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2013

This study aimed to evaluate the effects of shaking stress in the hemolymph of the Manila clam Ruditapes philippinarum by quantification of nitric oxide (NO) levels. The clams were divided into 3 groups as follows: clams placed in a plain container (control), clams injected with nitro-L-arginine methyl ester (NAME, an NO inhibitor), and clams in a container filled with nylon fiber at a density of $1kg/m^3$. Subsequently, each group was placed in sea water and shaken at 100 rpm for 6 h. The concentration of NO was quantified by using DAF assay and Griess assay. Both the assays showed that while shaking significantly increased the NO concentration, the NO inhibitor reduced the NO concentration in the hemolymph of the clams tested. In addition, the nylon fiber, which was used as a filler, effectively prevented the increase in NO concentration. This result suggests that measurement of NO concentration is a useful tool for evaluation of physiological stress in marine bivalves. In addition, it should be considered that a filler is necessary when dredge fishing or the suspended clam culture method is developed.