참고문헌
- Davidowitz G, Kotick PG. The use of CAD/CAM in dentistry. Dent Clin North Am 2011;55:559-70. https://doi.org/10.1016/j.cden.2011.02.011
- El Zohairy AA, De Gee AJ, Mohsen MM, Feilzer AJ. Microtensile bond strength testing of luting cements to prefabricated CAD/CAM ceramic and composite blocks. Dent Mater 2003;19:575-83. https://doi.org/10.1016/S0109-5641(02)00107-0
- Oh SH, Kim SG. Effect of abutment shade, ceramic thickness, and coping type on the final shade of zirconia all-ceramic restorations: in vitro study of color masking ability. J Adv Prosthodont 2015;7:368-74. https://doi.org/10.4047/jap.2015.7.5.368
- Lee WS, Kim SY, Kim JH, Kim WC, Kim HY. The effect of powder A2/powder A3 mixing ratio on color and translucency parameters of dental porcelain. J Adv Prosthodont 2015;7:400-5. https://doi.org/10.4047/jap.2015.7.5.400
- Attia A, Kern M. Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. J Prosthet Dent 2004;92:551-6. https://doi.org/10.1016/j.prosdent.2004.09.002
- Dalpino PH, Francischone CE, Ishikiriama A, Franco EB. Fracture resistance of teeth directly and indirectly restored with composite resin and indirectly restored with ceramic materials. Am J Dent 2002;15:389-94.
- El-Damanhoury HM, Haj-Ali RN, Platt JA. Fracture resistance and microleakage of endocrowns utilizing three CAD-CAM blocks. Oper Dent 2015;40:201-10. https://doi.org/10.2341/13-143-L
- Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5. https://doi.org/10.1016/j.prosdent.2015.06.014
- Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater 1994;10:353-62. https://doi.org/10.1016/0109-5641(94)90059-0
- Imirzalioglu P, Karacaer O, Yilmaz B, Ozmen Msc I. Color stability of denture acrylic resins and a soft lining material against tea, coffee, and nicotine. J Prosthodont 2010;19:118-24. https://doi.org/10.1111/j.1532-849X.2009.00535.x
- Preis V, Grumser K, Schneider-Feyrer S, Behr M, Rosentritt M. The effectiveness of polishing kits: influence on surface roughness of zirconia. Int J Prosthodont 2015;28:149-51. https://doi.org/10.11607/ijp.4153
- Steiner R, Beier US, Heiss-Kisielewsky I, Engelmeier R, Dumfahrt H, Dhima M. Adjusting dental ceramics: An in vitro evaluation of the ability of various ceramic polishing kits to mimic glazed dental ceramic surface. J Prosthet Dent 2015;113:616-22. https://doi.org/10.1016/j.prosdent.2014.12.007
- Sarikaya I, Guler AU. Effects of different polishing techniques on the surface roughness of dental porcelains. J Appl Oral Sci 2010;18:10-6. https://doi.org/10.1590/S1678-77572010000100004
- Motro PF, Kursoglu P, Kazazoglu E. Effects of different surface treatments on stainability of ceramics. J Prosthet Dent 2012;108:231-7. https://doi.org/10.1016/S0022-3913(12)60168-1
- Fasbinder DJ, Neiva GF. Surface evaluation of polishing techniques for new resilient CAD/CAM restorative materials. J Esthet Restor Dent 2016;28:56-66. https://doi.org/10.1111/jerd.12174
- Raimondo RL Jr, Richardson JT, Wiedner B. Polished versus autoglazed dental porcelain. J Prosthet Dent 1990;64:553-7. https://doi.org/10.1016/0022-3913(90)90126-W
- Fuzzi M, Zaccheroni Z, Vallania G. Scanning electron microscopy and profilometer evaluation of glazed and polished dental porcelain. Int J Prosthodont 1996;9:452-8.
- Yilmaz C, Korkmaz T, Demirkoprulu H, Ergun G, Ozkan Y. Color stability of glazed and polished dental porcelains. J Prosthodont 2008;17:20-4.
- Esquivel JF, Chai J, Wozniak WT. Color stability of low-fusing porcelains for titanium. Int J Prosthodont 1995;8:479-85.
- Lawson NC, Burgess JO. Gloss and stain resistance of ceramic-polymer CAD/CAM restorative blocks. J Esthet Restor Dent 2016;28:S40-5. https://doi.org/10.1111/jerd.12166
- Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5. https://doi.org/10.1016/j.prosdent.2015.06.014
- Stawarczyk B, Liebermann A, Eichberger M, Guth JF. Evaluation of mechanical and optical behavior of current esthetic dental restorative CAD/CAM composites. J Mech Behav Biomed Mater 2015;55:1-11.
- Stawarczyk B, Sener B, Trottmann A, Roos M, Ozcan M, Hammerle CH. Discoloration of manually fabricated resins and industrially fabricated CAD/CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing. Dent Mater J 2012;31:377-83. https://doi.org/10.4012/dmj.2011-238
- Robinson FG, Haywood VB, Myers M. Effect of 10 percent carbamide peroxide on color of provisional restoration materials. J Am Dent Assoc 1997;128:727-31. https://doi.org/10.14219/jada.archive.1997.0295
- Patel SB, Gordan VV, Barrett AA, Shen C. The effect of surface finishing and storage solutions on the color stability of resin-based composites. J Am Dent Assoc 2004;135:587-94. https://doi.org/10.14219/jada.archive.2004.0246
- Gajewski VE, Pfeifer CS, Froes-Salgado NR, Boaro LC, Braga RR. Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility. Braz Dent J 2012;23:508-14. https://doi.org/10.1590/S0103-64402012000500007
- Khokhar ZA, Razzoog ME, Yaman P. Color stability of restorative resins. Quintessence Int 1991;22:733-7.
- Gawriolek M, Sikorska E, Ferreira LF, Costa AI, Khmelinskii I, Krawczyk A, Sikorski M, Koczorowski PR. Color and luminescence stability of selected dental materials in vitro. J Prosthodont 2012;21:112-22. https://doi.org/10.1111/j.1532-849X.2011.00808.x
피인용 문헌
- Color Stability of CAD/CAM Ceramics Prepared with Different Surface Finishing Procedures pp.1059941X, 2019, https://doi.org/10.1111/jopr.13019
- Influence of polishing systems on roughness and color change of two dental ceramics vol.11, pp.4, 2016, https://doi.org/10.4047/jap.2019.11.4.215
- Hydroxyapatite coating effect on the bond strength between CAD/CAM materials and a resin cement vol.107, pp.4, 2019, https://doi.org/10.1007/s10266-019-00420-y
- Influence of the Coca-Cola Drinks on the Overall Color of Glazed or Polished Porcelain Veneers Fabricated from Different Materials and Thicknesses: An In Vitro Study vol.21, pp.1, 2016, https://doi.org/10.5005/jp-journals-10024-2705
- Surface Characterization of Monolithic Zirconia Following Treatment with Different Polishing Techniques vol.980, pp.None, 2016, https://doi.org/10.4028/www.scientific.net/msf.980.176
- Investigating the color changes on resin‐based CAD/CAM Blocks vol.32, pp.2, 2016, https://doi.org/10.1111/jerd.12561
- Survival Probability, Weibull Characteristics, Stress Distribution, and Fractographic Analysis of Polymer-Infiltrated Ceramic Network Restorations Cemented on a Chairside Titanium Base: An In Vitro an vol.13, pp.8, 2020, https://doi.org/10.3390/ma13081879
- Surface characteristics of dental resin nanoceramic in in vitro finishing with dental handpiece and rotary burs vol.8, pp.2, 2016, https://doi.org/10.1088/2051-672x/ab8c95
- Effect of erosive and abrasive challenges on the glaze layer applied to ceramic materials vol.32, pp.8, 2020, https://doi.org/10.1111/jerd.12643
- Influence of toothbrush abrasion and surface treatments on the color and translucency of resin infiltrated hybrid ceramics vol.13, pp.1, 2016, https://doi.org/10.4047/jap.2021.13.1.1
- Effect of different fabrication steps on color and translucency of a CAD‐CAM feldspathic ceramic vol.33, pp.7, 2021, https://doi.org/10.1111/jerd.12789
- Color Stability and Translucency of Polymer-Infiltrated Ceramic-Network Materials-A Systematic Review of the Literature vol.11, pp.10, 2021, https://doi.org/10.1166/jbt.2021.2746
- Quantitative analysis on the wear of monolithic zirconia crowns on antagonist teeth vol.21, pp.1, 2021, https://doi.org/10.1186/s12903-021-01452-z
- Surface roughness and color measurements of glazed or polished hybrid, feldspathic, and Zirconia CAD/CAM restorative materials after hot and cold coffee immersion vol.21, pp.1, 2016, https://doi.org/10.1186/s12903-021-01770-2