• 청정기술
• /
• 제29권1호
• /
• pp.1-9
• /
• 2023

군에서의 폐탄약 및 제조업체에서 생산 중에 발생되는 불용화약 등 폐화약류는 지속적으로 발생되고 있다. 이들은 화재, 폭발 등을 유발하는 화약류의 위험성으로 일반 폐기물 처 리시설에서는 처리가 어려우며, 지정된 폐기처리시설에서 야외 소각 및 기폭처리를 하는 것이 고전적인 폐기처리 방법이다. 야외에서의 소각 및 기폭을 통한 폐기처리시에는 SO_x, NO_x와 같은 유해물질의 배출에 의한 대기오염, 중금속 및 난분해성 물질로 인한 토양 및 수질 오염 등 다양한 환경문제를 유발시킨다. 이러한 환경문제를 극복하기 위한 친환경적인 다양한 폐기처리 방안이 개발되고 있으며, 일부 국가에서 운영중에 있다. 본고에서는 폐화약류의 다양한 친환경적인 폐기처리 공정 및 각 공정에 있어서의 장, 단점을 소개하여 폭발성 위험물 및 유해물질처리의 향후 연구방향을 제안하고자 한다.

• 한국지반공학회논문집
• /
• 제35권11호
• /
• pp.7-14
• /
• 2019

압축 벤토나이트는 고준위폐기물을 처분하기 위한 공학적방벽 시스템에서 중요한 구성요소 중 하나인 완충재의 후보물질로 가장 적합한 것으로 고려되고 있다. 완충재는 처분공 내 사용후핵연료가 담긴 처분용기와 근계 암반 사이에 채워지는 방벽재로서 지하수 유입으로부터 처분용기를 보호하고, 방사성 핵종 유출을 저지한다. 처분 초기에는 처분용기로부터 발생하는 고온의 열량으로 인해 완충재의 포화도는 감소하지만, 그 후 주변 암반으로부터 유입되는 지하수로 인해 완충재의 포화도는 증가한다. 이렇듯 완충재는 처분 운영 조건에 따라 불포화에서 포화 상태로 도달하게 되기에 완충재의 불포화-포화 거동 특성은 공학적방벽의 전체 안전성을 좌우할 수 있는 중요한 입력자료이다. 따라서 본 연구에서는 국내 압축 벤토나이트 완충재에 대한 수분보유특성을 규명하고자 하였다. 처분 초기 온도 증가에 따라 완충재의 포화도가 감소하는 상황을 고려하여 상온에서부터 125도까지 압축 벤토나이트의 온도 증가에 따른 체적 함수비와 수분흡입력을 측정하였다. 또한 이를 상온에서 동일한 함수비에서의 수분보유능과 비교하였으며 상온에서의 수분흡입력은 1~15% 정도 크게 측정되었다.

• 한국환경농학회지
• /
• 제15권4호
• /
• pp.506-519
• /
• 1996

The water quality in the rural areas is degrading due to a variety of causes such as the increase of the urban sewage and industrial wastes, the disposal of solid wastes, the growth of livestock waste, the growth of leisure facilities, the establishment of agricultural industry estates and etc. The water pollutants are scarce while the effluent is increasing from wide scattered sources. The technology specifically designed for the rural wastes water treatment plant needs to be implemented with improvement of agricultural water quality. 1. An integrated management measures against water pollution sources. The prevention of water pollution is the best measures in the environmental pollution. Hence, the most effective measures needs to be against the sources. Small-scale water treatment plants needs to be constructed in each village in the rural areas. As for the industrial effluent, the effluent discharge needs to be strictly monitored. Government subsidy for the establishment of treatment plant for livestock wastes is necessary. 2. The establishment of national-wide network for agricultural water quality. The network for agricultural water quality have been operated to conserve the agricultural water quality, and to develop management policies by the assessment of water pollution in the rural areas. The results of agricultural water quality network indicates that the water quality is degrading not only around urban areas but also in the distant rural areas, and the water quality at the pumping stations and weirs is worse than that of reservoirs. 3. The legal, systematic, and technical approaches for the agricultural water quality management. The actions currently implemented for the improvement of agricultural water quality involve temporary measures such as the improvement of irrigation facilities. These contingency measures are not effective in the long-term, and sometimes bring secondary pollution. Therefore, integrated measures covering the whole water environment such as the flow, quality, river morphology, aquatic ecosystem, and the surrounding environment, need be invented and implemented. Besides, the legal, systematic, and technical frameworks for the management are not fully established so far. The technology for the treatment of rural water pollution should be refined afterwards, and the research for the development of rural waste water treatment plant should be carried out.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2004

Recently. as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust af the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. The present study purposed to analyze the physical and dynamic characteristics of woody cement boards, which were made by modifying water-cement ratio for each wood inclusion rate based on a hardening-accelerator inclusion rate set in previous studies and, based on the findings. to provide basic data about the physical properties of inorganic boards made of waste wood, in order to Produce woody cement boards using waste wood, which has problems in being used in the manufacturing of woody cement boards.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.

• 환경영향평가
• /
• 제14권6호
• /
• pp.365-375
• /
• 2005

For managing and utilizing a closed municipal solid waste landfill site in environmentally secure conditions, it is necessary to verify the stabilization level of landfill gas(LFG) and waste. For assessing LFG and waste stabilization of an open-dumping municipal solid waste landfill (Salmi Landfill) which is located at the vicinity of Chungju Reservoir which flows into Paldang Reservoir that has been used for Seoul Metropolitan water supplies, the history and the surrounding characteristics of the landfill site were surveyed. In this study, waste and LFG samples obtained from landfill site were physically and chemically analyzed, and then the analysis results were evaluated on the basis of 'The Criteria of Landfill Waste Stabilization(CLWS)' that were promulgated by Korean Ministry of Environment. Based on LFG composition of Salmi landfill, $CH_4$ was as high as 68%. In CLWS regulation, the stabilization criteria of $CH_4$ should be lower than 5%, and the criteria of C/N ratio should also be lower than 1/10. The result showed that C/N ratio of landfilled waste ranged 17.4~24.7. From this results, it was concluded that the LFG and C/N ratio stabilization level of this landfill based on the CLWS were still actively proceeding.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.73-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, congelation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• 방사성폐기물학회지
• /
• 제14권1호
• /
• pp.21-33
• /
• 2016

Estimation of groundwater hydrologic cycle pattern is one of the most critical issues in sustainable management of groundwater resources in coastal area. This study estimated groundwater percolation by using the water balance methodology and hydrogeological characteristics of land use and soil. Evapotranspiration was computed by using the Thornthwaite method, and surface runoff was determined by using the SCS-CN technique. Groundwater storage change was obtained as 229 mm/a (17.8% of the average annual rainfall, 1286 mm/a), with 693 mm/a (60.1%) of evapotranspiration and 124 mm/a (9.6%) of surface runoff. Rainfall and groundwater storage change was highly correlated, comparing with the relationships between rainfall and evapotranspiration, and between rainfall and surface runoff. This result indicates that groundwater storage change responds more sensitively to precipitation than evapotranspiration and surface runoff.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.244-250
• /
• 2003

본 논문에서는 황사빗물이 중ㆍ저준위 방사성 폐기물 시멘트 고화체에 미치는 영향을 알아보았다. 실험은 ANS 16.1 실험법을 채택하였다. Co 핵종을 포함한 시멘트 고화체를 제작한 후, 대기 중 황사성분의 질량농도를 이용해 침출수의 부피, 이온 및 금속의 농도 등을 결정한다. 실험을 위해 대기 중 황사 부하량이나 강수에 포함되는 황사성분의 양, 처분장의 면적 등은 적합한 가정을 통해 결정하였다. 본 논문에서는 황사의 특성에 대해 간략히 소개하고 침출 실험의 준비과정으로 실험 조건을 결정한 후에, 90일간의 침출실험을 통해 나온 결과로 황사빗물에 의한 시멘트 고화체의 영향을 평가ㆍ분석하였다.

• KSBB Journal
• /
• 제26권5호
• /
• pp.417-421
• /
• 2011

Because beverage waste contains a lot of sugar, it can be used as a valuable resource for energy. But beverage waste is discharged through the water treatment. To prevent the waste of the energy resource, we produced bioethanol by using beverage waste in this study. In order to produce bioethanol, we added distillers stillage and NaOH for fermentation condition (nutrients and pH adjustment). As a results, ethanol concentration was 5.92 vol%. In contrast, ethanol concentration of blank (not added nutrients) was low and fermentation rate was very slow. Because components of the distillers stillage help the yeast growth, fermentation yield and rate was improved. Finally, we operated distillation and dehydration process by using fermented mash and produced fuel bioethanol (more than 99.5 wt%). We think that this results may provide useful information with application of commercial ethanol production using beverage waste.