• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.418-419
• /
• 2019

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2016년도 춘계학술논문요약집
• /
• pp.167-168
• /
• 2016

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.293-294
• /
• 2017

• 유기물자원화
• /
• 제18권3호
• /
• pp.60-67
• /
• 2010

우리나라의 대형 생활폐기물소각시설의 건설시기를 보면 상당수가 1980년대 후반인 것을 알 수 있다. 대부분의 시설들은 이 시기에 설계되었으며 그 후에 건설된 소각로 역시 변경이나 조정 없이 시설해온 것으로 조사되고 있다. 그러나 소각로에 반입되는 폐기물의 성상은 정부의 폐기물수거 정책에 의해 급격히 변화하고 있다. 이는 생활폐기물의 발열량변화를 조사해 봄으로도 쉽게 알 수 있다. 그 결과 많은 소각시설에서 과열에 의해 내화물과 화격자가 손상되고 있다. 한편 보일러 전열면에 클링커가 생성되어 열전달에 방해를 줌으로 이용열량이 줄어들 뿐만 아니라 연소실의 온도가 상승되는 등 원하지 않는 현상이 연속되고 있다. 이를 개선하기 위해 폐기물저장고에 물을 뿌리거나, 분리수거해 온 음식물류 폐기물을 다시금 혼합하여 혼소하거나 연소실에 물을 분사하는 방법을 동원하고 있다. 이러한 방법은 근본적인 해결책이 되지 않으며, 설계부터 다시 하여 새로 시설하는 것 또한 비용적인 측면에서 효과적이지 못하다. 따라서 본 연구를 통해 위와 같은 문제를 원천적으로 해결 하기위한 방법을 도출해 보았다.

• International Journal of Costume and Fashion
• /
• 제10권2호
• /
• pp.61-71
• /
• 2010

The purpose of this study was first, to examine the causes for the recent acceleration in the increase of textile/apparel waste and the current practices for reducing waste in the global textile and apparel industry; and second, to explore the influence of sustainability and social responsibility on fashion trends. Extensive literature on sustainable apparel and sustainable and socially responsible practices by global textile and apparel firms was reviewed in conducting this research. First, an accelerated fashion diffosion speed due to fast fashion was focused on as a cause for the increase in textile/apparel waste whereas mass customization was focused on as a potential solution for reducing waste. Then, the influence of the social trend toward sustainability and social responsibility on fashion trends was discussed, particularly the trends toward green products and recycled fashion, the trend against using real for or leather, and minimum-fabric-waste fashion in design and product development. This study furthers consumers' understanding of sustainability and social responsibility related to fashion trends and hopefully increases their consciousness in becoming socially responsible consumers. This study will also contribute to better decision-making in apparel and textile firms to produce sustainable fashion products.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.253-259
• /
• 2005

Mine is quickly decline, Nowadays, many of abandoned and closed mines. AMD is abandoned surface water by accumulated yellowboy and caused environmental pollution by amount of heavy metals. The aim of this study waste lime was mixed with the sediment to produce an aggregate far the purpose of neutralizing the acidity and stabilization the heavy metal in the aggregate structure .to pozzolan effect. The result of Waste lime and sediment mixed(5%, 10%, 20%)ration by curing days(3, 7, 38days), After 28 curing days as 5% mixed waste lime leaching solution concentration of all heavy metals is satisfied with regulation limit. Also, the result of fractionate heavy metals to stabilization as 28 curing days very decrease exchangeable and reducible type, and then increase carbonate type. With the above results, waste lime the most effective for the sediment treatment and useful for the recycling waste resource.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.209-212
• /
• 2002

Main radionuclides of the soil waste stored in Korea Atomic Energy Research Institute are Co-60 and Cs-137. Moisture content of soil is 12%, pH of soil is 5.8, and content of organic matter is 2.2 %. Radioactive concentrations of the soil particle size of which is less than 0.063mm and soil in the drum surface of which is more than radiation dose rate 0.05mR/hr are higher. Meanwhile, radioactive concentration of soil in the drum surface of which is less than radiation dose rate 0.02 mR/hr are mostly lower. On using the mixing solution of ammonium sulfate and citric acid, 62% Co was removed from soil and 41% Cs was removed. Also, on using the mixing solution of ammonium nitrate and citric acid, 61% Co was removed from soil and 39% Cs was removed, and on using the mixing solution of ammonium potassium oxalate, 36% Co was removed and only 3% Cs was removed. And on using only water, removal efficiency is less than 5%.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.203-206
• /
• 2001

Finding the optimal solution in the river water quality management system is very hard with the non-linearity of the water quality model. Many suggested methods for that using the linear programming, non-linear programming and dynamic programming, are failed to give an optimal solution of sufficient accuracy and satisfaction. We studied a method to find a solution optimizing the river water quality management in the aspect of the efficiency and the cost of the waste water treatment facilities satisfying the water Quality goals. In the suggested method, we use the QUAL2E water quality model and the genetic algorithm. A brief result of the project to optimize the water quality management in the Youngsan river is presented.

• 한국환경과학회지
• /
• 제7권3호
• /
• pp.401-408
• /
• 1998

An experimental research was preformed for the development of an effective process for zinc oxide waste(zinc ash) reuse. Zinc was selectively leached from zinc ash by 30 vol.% D2EHPA In kerosine solution, and the leaching velocity was quite fast. Zinc leached was stripped by sulfuric acid solutions, and the amount of zinc stripped was linearly Increased with the amount of sulfuric acid used. Zinc oxide fine particles were obtained by dropwise adding of sodium hydroxide solution to the resultant aqueous zinc solution at 85$^{\circ}C$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.793-798
• /
• 2003

The purpose of this study is to investigate the setting properties of polystyrene mortars using waste expanded polystyrene(EPS) solution-based binders. The binders for polystyrene mortars are made by mixing crosslinking agent with waste EPS solutions which prepared by dissolving EPS in styrene. Polystyrene mortars are prepared with various EPS concentrations of EPS solutions and crosslinking agent contents, subjected to a dry curing, and tested for working life, peak exotherm temperature and 10h-length change. From the test results, the working lives of polystyrene mortars are shortened with raising EPS concentration of EPS solution and crosslinking agent content. Low-shrinkage or non-shrinkage of polystyrene mortars should be accomplished by adjusting EPS concentration of EPS solution and crosslinking agent content.