• Composites Research
• /
• 제17권2호
• /
• pp.21-27
• /
• 2004

본 논문에서는 화학처리된 페 페인트와 페 스티로폼을 사용한 폴리머 콘크리트를 제작하고 그 기계적 특성을 평가하였다. 또한 골재와 수지재의 조성비 변화에 따른 압축강도, 비중, 흡수율 등을 평가하였다. 실험결과로부터 페 페인트를 사용한 폴리머 콘크리트의 비중은 기존의 폴리머 콘크리트 보다 낮은 값을 가지며, 건축용 외장재로 사용할 수 있을 것으로 판단되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.223-228
• /
• 1997

In this study, bottom ash, lightweight aggregate, and Expanded Polystyrene was used to lighten the mortar. In order to compensate the reduction of strength caused by lightening, the waste foundry sand produced as solid waste was substituted for fine aggregate. As the device of reducing the ratio of absorption, the procedure of mixture was altered to check the effectiveness of surface coating of porous lightweight aggregate. It was observed over 170kg/$\textrm{cm}^2$ compressive strength at gravity about 1.3, an over 380kg/$\textrm{cm}^2$ at gravity about 1.7. the maximum strength was occurred when 30% of fine aggregate was replaced was replaced with waste foundry sand, and the ratio of absorption was decreased over 10% by changing the procedure of mixture.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.221-222
• /
• 2016

The replacement ratio of waste EPS was varied, and its effect on compressive strength and absorption capacity was investigated. According to the experimental results, The 28th day compressive strengths for the W/C 50% specimens were 17.5~21.2MPa, which was relatively low compared to the 13.6~22.2MPa of the W/C 70%.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.79-85
• /
• 1999

Use of soils with crushed expanded polystyrene(EPS) satisfied both recycling of industrial waste and development of new light-weight fill materials. Objectives of the study were to make the mixed the mixed soils with the crushed EPS and to suggest the most rational mixing ration as a fill material. A series of laboratory tests was performed to investigate the relationship between miximum dry density and optimum moisture contenr and to find the variation of CBR for mixtures with 3 soils and 2 sizes of the crushed EPS. Results of the test showed that the sizes fo the curshed EPS had a little effect on the properties of mixed soils. But gradatiion of soils and mixing ration with the crushed EPS were important factors to characterize compaction properties of the mixed soils.

• 에너지공학
• /
• 제16권4호
• /
• pp.194-201
• /
• 2007

바이오매스계 연료의 고위발열량(HHV) 예측을 성분원소분석 데이터와 제안된 대표적인 상관관계식을 이용하여 수행하였고, 각 상관식에 대한 그 타당성을 실측 HHV와 비교하여 검토하였다. 실험에 사용된 샘플들은 산림계 바이오매스인 노송나무의 톱밥과, 농업계 바이오매스인 왕겨, 그리고 여기에 유기성 폐기물인 polystyrene, waste paper, polypropylene을 각각 10, 30, 50wt%로 혼합하여 제작하였다. 성분원소의 측정과 HHV의 측정은 각각 KS 표준방법에 따랐으며, 예측된 HHV값의 평균 오차는 약 880 kJ/kg으로 이는 측정된 HHV의 약 3.8%에 해당하였다. 실험을 통한 값과 예측된 HHV 값 사이의 대응 상관계수의 곱($R^2$)은 $0.957{\sim}0.996$의 값을 나타내었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.592-596
• /
• 2001

A TACUB jig was applied to separate waste plastics [polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polyethylene terephthalate (PET)] used in copy machine. The effect of water pulsation including amplitude and frequency on the separation performance was investigated for the feeds containing two or three plastics. Good results are obtained under suitable conditions. Grades of 99.8% PS,99.3% ABS, and 98.6% PET are recovered as the products in the upper, middle and bottom layers respectively. Based on these results, a processing plant fer recycling of plastics from scrapped copy machines is now under construction.

• Elastomers and Composites
• /
• 제33권1호
• /
• pp.3-9
• /
• 1998

The production of polyurethane polymer has been increased because of their unique properties and variety process methods available. The generation of their wastes also increases with products. These byproducts of industrialization seriously threaten the environmental demanding. Therefore, development of the recycling technologies have been required. The main propose of this study is to develop the recycling technology of waste polyurethane from a footwear scrap. This technique is composed of the following procedure : crushing, devulcanizing, pelletizing, washing and drying. The pellet was characterized with various methods. The recycled polyurethane(RPU) was blended with HIPS(high impact polystyrene) and investigated morphologically and rheologically. The experimental results showed that the addition of 20% HIPS to RPU was limited without mechanical performance of the superial properties of a virgin polyurethane. We believe that these technical information make possible to develop a rational engineering product.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.233-238
• /
• 2003

플라스틱 광섬유섬광체(PSF)를 여러 가닥의 다발로 묶은 방사선센서를 제작하여 $^137Cs$ 감마선원에 적용하여 가닥수에 따른 방사선 계측 특성을 분석하였다. 이를 통하여 센서부위와 전송용 광섬유간의 집광을 용이하게 하는 끝이 가늘어지는 광섬유(Tapered fiber)의 필요성을 발견하였다. Tapered 광섬유의 성능을 예측하기 위하여 polystyrene을 기반으로 미량의 dPOPOP와 PPO 또는 dPBD를 첨가한 Tapered 플라스틱 섬광체를 제작하였으며, $^137Cs$ 선원 1 1.5, 3, 5 ${\mu}Ci$에 적용하여 출력파고 및 방사능과 총계수치 사이의 비례관계를 분석하였다. 본 연구를 통하여 플라스틱 광섬유섬광체를 Tapered 형태로 제작하는 경우 ${\mu}Ci$ 수준의 감마선 장에서 방사선 계측기로 개발될 수 있음을 확인하였다.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.57-64
• /
• 2007

유사비중의 범위에 있는 PVC, PET and PMMA 3종 혼합플라스틱의 마찰하전 정전선별이 2단계 분리공정을 통하여 수행되었다. PVC, PET and PMMA의 재질분리에 있어 효과적인 하전장치의 재질은 Polypropylene(PP) 과 high-impact polystyrene(HIPS) 임을 확인하였다. PP 싸이클론 하전장치를 이용한 1단계 분리공정에서, PVC의 품위와 회수율은 공기속도 10 m/s, 전기장의 세기 200 kV/m 이상, 분리대 위치 +2cm, 상대습도 30% 이하의 조건에서 각각 99.6%와 97.5%로 구하였으며, HIPS 싸이크론 하전장치를 이용한 2단계 분리공정으로부터, 공기속도 10 m/s, 전기장의 세기 250 kV/m, 분리대 위치 0cm, 상대습도 40% 이하의 조건에서 PMMA의 품위와 회수율을 각각 97.8%와 95.12%로 구하였다.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3717-3722
• /
• 2021

In this study, the recovery rates of the dissolution method for radioactivity analysis of expandable polystyrene (EPS) with a liquid scintillation counter (LSC) using tetrahydrofuran (THF), toluene, and acetone as solvents were estimated. The detection efficiency calibration curve for each solvent was derived. Two methods-the volumetric ratio method and the quenching agent method-were used to prepare quench source sets, and calibration curves were derived by linking the data from the two quench source sets. The R² value of the calibration curve for THF was found to be 0.984. The relationship between the mass of dissolved EPS and the quench level was estimated: the quench level increased as the mass of dissolved EPS increased. Premix and postmix dissolution methods were tested. The recovery rates using THF with the premix method were 84.9 ± 0.9% and 96.5 ± 1.5% for ³H and ¹⁴C, respectively. Furthermore, the stability of the recovery rate over time when using THF was evaluated. The dissolution method with the premixed solution exhibited a more stable recovery rate over time. The dissolution methods were found to be applicable for analysis using LSC, and THF was found to be the most suitable solvent for the proposed method.