• 제목/요약/키워드: waste newspaper

검색결과 25건 처리시간 0.027초

폐신문지에 의한 단열보드의 개발 (Development of heat insulating boards by waste-newspaper)

  • 정승수;이원희;장준복;이종윤
    • 한국가구학회지
    • /
    • 제10권1호
    • /
    • pp.95-102
    • /
    • 1999
  • The objective of this paper was the development of boards made from waste newspapers. The boards were produced from particle ONP(old newspaper) to reduce energy consumption in the board production process. ONP boards bonded with polyurethan adhesives(PU) were produced on a laboratory scale, and their physical and mechanical properties were examined. The average density of the ONP was $0.48g/cm^3$, and the densities of the boards were $0.50-0.90g/cm^3$. Therefore, th compaction ratios of the boards were in the range of 1.04-1.88. The results obtained were as follows: 1) An increase in board density results in a corresponding improvement in bending properties. 2) An increase in board density results in increased thermal conductivity. 3) In this research, ONP board can be used only for interior applications. To gain exrerior applications, the dimensional stability properties(thickness swelling and water absorption) need to be improved.

  • PDF

폐플라스틱/폐섬유소 복합체의 기계적 물성 (Mechanical Properties of Plastic Waste/Cellulose Waste Composites)

  • 홍영근
    • Elastomers and Composites
    • /
    • 제38권1호
    • /
    • pp.19-26
    • /
    • 2003
  • 혼합폐플라스틱과 섬유소로서 폐신문지를 혼합하여 복합체를 구성하고 그 기계적인 물성을 조사하였다. 수지-수지 및 수지-섬유소 사이의 계면접착력을 증대시키고자 섬유소와 친화성을 가진 아비틱산을 소량 첨가하였다. 섬유소의 투입량이 많아질수록 인장강도는 플라스틱자체보다 저하되었으며 아비틱산은 강도에 좋은 영향을 주지 못하였다. 파단신장률 및 충격강도는 섬유소만의 투입량에 따라서는 감소하였으나, 섬유소가 적은 양이고 아비틱산이 적게 포함되어 있을 경우에 놀라운 상승을 나타내었다. 물성의 향상은 아비틱산의 화학적인 양면성에 기인한다고 여겨진다.

아세톤을 용매로 한 폐신문지의 용매상 열분해 반응에 관한 연구

  • 온광철;윤성욱;이병학
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.761-762
    • /
    • 2000
  • 폐신문지는 MSW의 많은 부분을 차지하고 있다. 폐신문지는 바이오매스의 성분인 셀룰로오스, 헤미셀룰로오스, 리그닌을 함유하고 있고, 특히 리그닌은 열분해하였을 때 연료 및 연료첨가제를 얻을 수 있었다. 따라서 폐신문지를 열분해 하였을 때도 이와 같은 현상을 얻을 수 있었다. 폐신문지의 열분해 공정에서 최적조건은 $300{\sim}400^{\circ}C$, $40{\sim}50$분으로 확인할 수 있었다. 반응온도는 촉매를 써서 낮출 수가 있을 것이다. 열분해 생성물질은 방향족화합물이 많았는데, 이는 리그닌에서 기인하였다고 볼 수 있을 것이다.

  • PDF

폐지의 해섬에 관한 연구 (A basic study on the defiberation of waste newspaper)

  • 윤태환;김형석;조동성
    • 자원리싸이클링
    • /
    • 제4권1호
    • /
    • pp.31-37
    • /
    • 1995
  • 본 연구는 폐신문지로부터 목재섬유를 분리하여 회수하는 해섬공정에서 교반의 정도, 폐지의 농도, 해섬용수에 용존하는 이온의 농도, 인쇄 면적, 침적시간, 해섬 수용액의 온도등이 해섬에 미치는 영향을 조사하였다. 고온($50^{\circ}C$) 수용액에서의 해섬은 상온($16^{\circ}C$) 수용액에서의 해섬보다 약 2배의 효율을 보였다. 2000r.p.m. 이하의 저속 교반 해섬에서는 회전수가 2배 증가함에 따라 2배의 해섬효율을 보인다. 온도 $16^{\circ}C$, 펄프농도 1%, 교반기의 회전수 1200에서 NaOH의 1$\times$10\ulcornerM은 1$\times$10\ulcornerM 보타 약 3배의 해섬효율의 향상을 나타낸다. 침적 온도는 침적시간보다 해섬에 더 큰 영향을 미친다. 단위 면적에서 인쇄면적이 넓어지면 해섬속도는 늦어진다. 알칼리성 수용액이 해섬에 효과적이고, 같은 농도에서의 해섬은 NaOH>KOH>$Na_2$SiO$_3$>$Na_2$$CO _3$> $Ca(OH)_2$의 효율순서를 보인다.

  • PDF

종이 혼합 콘크리트의 내화특성 실험연구 (Experimental Study on the Fire Resistant Capacity of Waste Paper-Mixed Concrete)

  • 조병헌;손기상
    • 대한안전경영과학회지
    • /
    • 제9권4호
    • /
    • pp.83-90
    • /
    • 2007
  • This study is to find out if it can be recycled for making better concrete. Therefore, waste paper as of newspaper and newspaper are added into concrete to see if waste paper-mixing concrete can have any particular characteristic. The test result of paper concrete was compared and analyzed through four kinds of tests such as compressive strength as of a fundamental one of concrete resistant capacity against heat. $200^{\circ}C,\;400^{\circ}C\;and\;600^{\circ}C$ heated concrete were compressively tested in order to find out concrete strength resistant to high temperature. heat capacity was also tested, based on the expectancy of its low conductivity. finally flexural strength test using four reinforced concrete beams with size of $20cm{\times}30cm{\times}160cm$ was made. And concrete property exposed to the temperature showed that there are almost not effect for the strength up to $400^{\circ}C$, but it was decreased down to 50% of the original condition. volume of paper mixed with concrete without relation to paper kinds of new and waste one.

목질분해효소에 의한 고지의 재활용 기술연구(제2보)-조효소가 폐지의 표백 특성 및 종이의 물성에 미치는 영향- (Studies on the Recycling Technology of the Waste Paper with Wood Degradable Enzyme(II)-Effect of Crude Enzyme on the Bleaching Characteristics and Physical Properties of Waste Paper-)

  • 양재경;장준복;엄태진
    • 펄프종이기술
    • /
    • 제30권3호
    • /
    • pp.15-21
    • /
    • 1998
  • Crude enzymes of Trichoderma viride and Phanerochaete chrysosporium were evaluated for their effect to brightness and physical properties of recycled pulp from newspaper and corrugated container board. The brightness of recycled pulp from newspaper increased with crude enzymes from Trichoderma viride and Phanerochaete chrysosporium. The brightness of recycled pulp of corrugated container board increased with crude enzyme from Phanerochaete chrysosporium, but decreased with crude enzyme from Trichoderma viride. The Δbrightness with chemical bleaching of crude enzyme treated pulp was lower than that of heat killed enzyme treated pulp, but the final brightness of pulp was increased. Modification of recycled paper with crude enzymes can result in a substantial increase in physical properties with little no loss in pulp freeness.

  • PDF

폐지의 유가식 동시당화발효에 의한 에탄올 생산 (Fed-Batch Simultaneous Saccharification and Fermentation of Waste Paper to Ethanol)

  • 권정기;문현수;김준석;김승욱;홍석인
    • KSBB Journal
    • /
    • 제14권1호
    • /
    • pp.24-30
    • /
    • 1999
  • Brettanomyces custersli를 이용하여 신문지의 유가식 동시 당화발효에 의한 에탄올 생산에 대한 연구를 수행하였다. 유가식 동시당화발효에 의한 에탄올 생산을 효과적으로 수행하기 위한 초기 기질 투입 농도는 8%(w/v)이었고 효소의 비용을 감안한 최적 효소 농도는 cellulase의 경우 30EPU/g cellulase, $\beta$-glucosidase와 cellulase의 부피가 0.1(활성비 1.05)이었다. 앞에서 결정된 초기 조건들을 가지고 교반식 반응기에서 수행된 유가식 동시당화발효는 26.8g/L의 에탄올을 생산성에서 회분식 동시당화발효보다 약 2배의 값을 나타내었다.

  • PDF

효소 당화율을 높이기 위해 폐 신문지의 전처리 (Pretreatment of Used Newspaper to Increase Enzymatic Digestibility)

  • 문남규;김성배
    • KSBB Journal
    • /
    • 제16권5호
    • /
    • pp.446-451
    • /
    • 2001
  • 신문지와 같은 폐지지 적합한 전처리 방법을 조사하였다. 조사방법은 전처리 후 기질의 효소 가수분해에 영향을 미칠수 있는 인자, 즉 회분의 양, 기질 크기의 잉크의 유무에 따른 효소 당화율을 측정하였다. 이 세 인자 중 잉크가 효소당화율에 미치는 영향이 가장 커서 잉크를 제거하는 방향으로 전처리 방법을 고안하였다. 먼저 섬유성 기질에서 성능이 입증된 percolation반응기에 의한 전처리 방법을 사용하였다. 그러나 17$0^{\circ}C$에서 전처리된 기질은 잉크가 거의 제거되지 않앗고 효소 당화율도 전처리하지 않은 기질보다 더 낮았다. 그래서 10$0^{\circ}C$이하의 낮은 온도에서 회분식 반응기를 사용하는 방법을 연구했는데 암모니아에 과산화수소를 첨가하여 진탕교반시키는 방법이 가장 효과적이었다. 이 방법의 효소 당화율은 전처리하지 않은 기질보다 약 20% 증가한 85%이어서 신문지와 같은 폐지의 전처리에 아주 효과적이었음을 알수 있었다. 이와 같은 높은 당화율은 암모니아에 첨가한 과산화수소가 잉크제거와 기질을 팽윤시키는 작용을 하기 때문이라고 생각된다.

  • PDF

폐지 복합재료의 물성 (Properties of Waste Paper Composite)

  • 김철현;김강재;엄태진
    • 펄프종이기술
    • /
    • 제40권3호
    • /
    • pp.48-52
    • /
    • 2008
  • Waste paper plastic composites were prepared with old newspaper and old corrugated containers and mixed office waste and those properties were evaluated. The results were summarized as fellows. 1. The strength properties like as tensile and Young's modulus reveled most high level in MOW composite. 2. The coagulation of fibers in paper particle should interrupt equal dispersion of polymer and paper particle. 3. The micrograph of the surface of composites showed the most high dispersion in ONP composite.

CaCO3 첨가법에 따른 재생 ONP의 특성변화 (Differences in Characteristics of Recycled ONP for CaCO3 Adding Techniques)

  • 안영준;남성영;엄남일;안지환;한춘
    • 한국세라믹학회지
    • /
    • 제51권2호
    • /
    • pp.97-102
    • /
    • 2014
  • In order to improve the refresh rate of old newspaper(ONP), PCC shape-controlling experiments were carried out. The effect of a PCC polymorph on improving the quality of old newspaper was studied for a transformation from waste paper to eco-friendly paper. The synthesis of PCC consists of an in-situ process and a loading process to enhance the refresh rate of old newspaper. The characteristics between the in-situ process and the loading process could be analysed by SEM analyses of coated fiber surfaces. The retention rate ranges from 65 to 67% after the application of the in-situ process, and that after the loading process ranges from 55 to 58%. The retention rates thus show a difference of about 7-10%. In addition, the whiteness and ERIC characteristics of the in-situ process gave more efficient results than those of the loading process.