• Journal of Korean society of Dental Hygiene
• /
• v.10 no.5
• /
• pp.935-945
• /
• 2010

Objectives : The purpose of this study was to examine the knowledge of dental hygienists on infection control in dental office and their attitude toward that in a bid to provide some information on ways of enhancing the level of infection control in dental office. Methods : The subjects in this study were 220 dental hygienists who worked in dental hospitals and clinics in Busan and South Gyeongsang Province. A survey was conducted from May 17 to June 17, 2010, and the answer sheets from 183 respondents were analyzed with a SPSS WIN 12.0 program. Statistical data on frequency, percentage and mean were obtained, and t-test, Pearson correlation coefficient and one-way ANOVA were utilized. Results : They got a mean of $4.59{\pm}.68$ in six categories of infection control knowledge. They had the best knowledge on dental waste disposal, followed by hand washing, post-sterilization management, instrument disinfection and sterilization, surface management of dental equipment and wearing personal protective equipment. They got a mean of $3.99{\pm}.54$ in attitude, and they scored lowest in practice of surface management of dental equipment. Overall, they scored higher in every aspect of knowledge than in attitude(t=11.410, p=.0.000). There was the greatest gap between their knowledge and practice in surface management of dental equipment (t=13.885, p=0.000), and there was the smallest gap between their knowledge and practice in hand washing(t=5.460, p=0.000). And a positive correlation was found between knowledge and attitude, as better knowledge of infection control led to better attitude toward that(p<.001). Finally, concerning infection control knowledge and attitude by general characteristics, the presence or absence of infection control guidelines made differences to infection control knowledge, and infection control attitude was statistically significantly different according to infection control education experiences(t=6.501, p=.012) and the presence or absence of infection control guidelines(t=22.836, p=.000). Conclusions : In order to bolster infection control in dental office, the related system should be improved to legally require dental personnels to implement infection control. Every dental office must be furnished with infection control guidelines, and sustained education should be provided for dental hygienists to carry out infection control.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.3-12
• /
• 2015

We researched characteristics of heat recovery rate and fouling according to structures and materials in heat exchangers like water preheater and air preheater. Economizer and air preheater have used in thermal electric power plant. we made small incinerator and heat exchangers to carry out simulated experiment. We observed fouling formation and change of heat recovery rate, combusting powdered coal for 24 hr. In economizer, fin tube type had the largest amount of fouling formation, followed by tube line type > pipe type > auto washing type according to structures. As heat recovery rate, fin tube showed highest recovery rate, followed by auto washing type > pipe type > tube line type. In air preheater, fin tube type had the largest amount of fouling formation, followed by fin plate type > pipe type > pipe type coated by teflon > pipe type coated by ceramic according to structures. And then, heat recovery rate showed the same oder.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• Korean journal of food and cookery science
• /
• v.19 no.3
• /
• pp.339-353
• /
• 2003

The rapid increase in food borne illness outbreaks in Korea has been one of the major threats to the Nation's Health. Foodservice establishments have been identified as the major place for these outbreaks, mainly due to the lack of sanitary management and sanitary facility management practices. The purposes of the study were to develop hospital foodservice facility evaluation tools, based on the general HACCP-based standards and guidelines, for hospital food service establishments, to ensure the safety of these foodservices and to reduce the risk of food home illness. The scope of this study included: 1) an assessment of the current foodservice sanitation practices and managements for 6 general hospitals, with more than 400 beds, and 3 general hospitals, with less than 400 beds; 2) the development of foodservice establishments sanitation evaluation tools and sanitation standards, based on the HACCP system. The survey data showed varied results between the hospitals surveyed. Most of the hospital foodservice operations had many problems with ventilation and the plumbing. The total dimensional mean scores for the hospitals with more than 400 beds and less than 400 beds were 31.5 and 27.0, respectively. The highest dimension scores were for the water supply facility and lighting, with the lowest for insect and rodent control and toxic materials management. The levels of the mean scores were very low, especially for the general hospitals with less than 400 beds. These low mean scores may have arisen from critical problems within the hospital foodservice operations. The most needed facility management items for improvement were: storage shelf should be spaced 6 inches from the floor and walls, the use of three compartment sinks, utility sinks and cleaning facilities, with a floor drain for cleaning mops or liquid wastes, a ventilation hood designed to prevent dripping onto food, cooking facilities should be disassembled for washing and sanitizing, a separated hand washing sink and a sanitized food board for each area should be provided, all toxic material must have warning labels attached, and be stored in an area away from food preparation under padlock. The evaluation tool consisted of 14 dimensions, with 65 check-off items. The results of this study will provide basic facilities' guidelines to regulators, or foodservice industry personnel, wishing to build, or expend, and establish an efficient flow of food. As a result, food borne illnesses will be effectively prevented, and the Nation's health will be promoted for the development of their own sanitation standards, with a checklist for the safe production of foods.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.106-112
• /
• 2011

Purpose: Until now, the process was improved by the needs of experimenters personally. But recently, suggestion system in hospital has been activated in various ways. So the department of nuclear medicine laboratory is also aware of the need of operation improvement using suggestion system. It is intend to assist in the development by sharing excellent suggestion cases with other hospitals. Material & Method: A total of 124 suggestion cases from January 2007 to March 2010 were analyzed. Suggestion cases were divided into customer satisfaction, cost reduction, improved testing methods, equipment, environmental improvement, and computational system. Result: Suggestion cases of environmental improvement and computational system were accounted for 26.6% as 33 cases, respectively. Suggestion for customer satisfaction is 25.8% as 32 in a total of 124 cases. Conclusion: Activation of the awareness of operation improvement is induced by suggestion system. By securing system of operation improvement, employees' ideas can lead to the production and systematization. Furthermore, it enhances hospital competitiveness and promotes the development of the hospital.

• Archives of Plastic Surgery
• /
• v.49 no.2
• /
• pp.266-274
• /
• 2022

Background Many authors have researched ways to optimize fat grafting by looking for a technique that offers safe and long-term fat survival rate. To date, there is no standardized protocol. We designed a "hydraulic system technique" optimizing the relationship among the quantity of injected fat, operative time, and material cost to establish fat volume cutoffs for a single procedure. Methods Thirty-six patients underwent fat grafting surgery and were organized into three groups according to material used: standard, "1-track," and "2-tracks" systems. The amount of harvested and grafted fat as well as material used for each procedure was collected. Operating times were recorded and statistical analysis was performed to establish the relationship with the amount of treated fat. Results In 15 cases the standard system was used (mean treated fat 72 [30-100] mL, mean cost 4.23 ± 0.27 euros), in 11 cases the "1-track" system (mean treated fat 183.3 [120-280] mL, mean cost 7.63 ± 0.6 euros), and in 10 cases the "2-tracks" one (mean treated fat 311[220-550] mL, mean cost 12.47 ± 1 euros). The mean time difference between the standard system and the "1-track" system is statistically significant starting from three fat syringes (90 mL) in 17.66 versus 6.87 minutes. The difference between the "1-track" system and "2-tracks" system becomes statistically significant from 240 mL of fat in 15 minutes ("1-track") versus 9.3 minutes for the "2-tracks" system. Conclusion Data analysis would indicate the use of the standard system, "1-track," and "2-tracks" to treat an amount of fat < 90 mL of fat, 90 ÷ 240 mL of fat, and ≥ 240 mL of fat, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.309-316
• /
• 2010

This paper proposes healthcare bathing system for improving the multisensory function and not washing. We designed various types of bathtub for developing bathing system. This system consists of whirlpool bathtub for multisensory stimulation, a cover of bathtub with visual-auditory stimulation function, a small size PC for main control, touch panel, digital multimedia broadcasting (DMB), color-changeable LED mood lighting system for improving visual sensibility and speaker. We investigate the effects on autonomic nervous system during bathing with healthcare bathing system for improving the multisensory functions. To analysis physiological parameter, body temperature, blood pressure, intraocular pressure and heart rate variability (HRV) were measured before, during and after bath using healthcare bathing system. Experiments were performed on partial immersion bath and the water temperature was kept $39{\pm}0.5^{\circ}C$. The body temperature and the heart rate variability of the subject were measured every 5 minutes before, during, and after the bath. In analysis of HRV, the parasympathetic nerve increased from starting bath and decreased after 15 minutes. So the subjects felt comfortable at 15 minutes after starting bath. Blood pressure decreased to 16mmHg maximumly however pulse increased. Bath using healthcare bathing system for improving the multisensory functions affects positively the circulation of the blood. From this results, it leaves something to be desired in evaluation of serviceability and physiological analysis using the healthcare bathing system, however, we expect to analyze more clearly the relationship between the serviceability of product, physiological change and sensibility by various physiological parameters.

• Research in Community and Public Health Nursing
• /
• v.9 no.2
• /
• pp.502-517
• /
• 1998

This research intends to survey family environment, health behavior and health status of the students in urban-rural elementary schools and analyze those factors comparatively, and use the result as basic material for school health teacher to teach health education in connection with family and regional areas. It also intends to improve a pupil's self-abilitiy in health care. The subjects involve 2,774 students of urban elementary schools and 583 student in rural ones, who were selected by means of a multi -stage probability sampling. Using the questionnaire and school documents, we collected data on family environment, health behavior and health status for 19 days. Feb. 2nd 1998 through Feb. 20th 1998. The R -form of Family Environment Scale (Moos, 1974) was used in the analysis of family environment(Cronbach's Alpha =0.80). Questionnaires of Health Behavior in School-aged children used by the WHO in Europe(Aaro et al., 1986) and the ones developed by the Health Promotion Committee of the Western Pacific(WHO, 1995)(adapted by long Young-suk and Moon Young-hee(1996)) were used in the analysis of health behavior, as well documents on absences due to sickness, school health room-visits, levels of physical strength, height, weight and degree of obesity were used to determine health status. In next step, We used them with an $X^2$-test, t-test, Odds Ratio, and a 95% Confidence Interval. 1. In two dimensions of three, family-relationship (t=3.41, p=0.001) and system -maintenances(t= 2.41, p=0.0l6) the mean score of urban children were significantly higher than those of rural ones. In the personal development dimension however, there was little significant difference. Assorting family environment into 10 sub-fields and analyzing them, we recognized that urban children were superior to rural children in the sub-fields of expressiveness (t =3.47, p=0.001), conflict (t=0.48, p=0.001), active-recreational orientation (t = 1.97, p=0.049) and organization (t=4.33, p=0.000). 2. Referring to the Odds Ratios of urban-rural children's health behaviors, urban children set up more desirable behavior than rural children wear ing safety belts (Odds Ratio =0.32, p=0.000), washing hands after meals(Odds Ratio = 0.43, p= 0.000), washing hands after excreting (Odds Ratio = 0.39, p=O.OOO), washing hands after coming - home ( Odds Ratio = 0.75, p = 0.003), brushing teeth before sleeping(Odds Ratio =0.45, p=0.000), brushing teeth more than once a day (Odds Ratio =0.73, p=0.0l2), drinking boiled water (Odds Ratio = 0.49, p=0.000), collecting garbage at home(Odds Ratio=0.31, p=0.000) and in the school(Odds Ratio =0. 67, p=0.000). All these led to significant differences. As to taking milk(Odds Ratio = 1.50, p=0.000), taking care of eyesight(Odds Ratio=1.41, p=0.001) and getting physical exercise in(Odds Ratio = 1.33, p=0.0l9) and outside the school(Odds Ratio = 1.32, p=0.005), rural children had more desirable behavior which also revealed a significant difference. There was little significant difference in smoking, but the smoking rate of rural children(5.5%) was larger than that of urban children(3.9%). 3. Health status was analyzed in terms of absences, school health room-visits, levels of physical strength, and the degree of obesity, height and weight. Considering Odds Ratios of the health status of urban-rural children, the health status of rural children was significantly better than that of the urban ones in the level of physical strength(t=1.51, p=0.000) and the degree of obesity(t=1.84, p=0.000). The mean height of urban children ($150.4{\pm}7.5cm$) is taller than that of their counterparts($149.5{\pm}7.9$), which revealed a significant difference (t =2.47, p=0.0l4). The mean weight of urban children($42.9{\pm}8.6kg$) is larger than that of their counterparts($41.8{\pm}9.0kg$), which was also a significant difference(t=2.81, p=0.005). Considering the results above, we can recognize that there are significant differences in family environment, health behavior, and health status in urban-rural children. These results also suggestion ideas for health education. What we would suggest for the health program of elementary schools is that school health teachers should play an active role in promoting the need and importance of health education, develop the appropriate programs which correspond to the regional characteristics, and incorporate them into schools to improve children's ability to manage their own health management.

• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.181-188
• /
• 2014

The objective of this study was to analyze the microbiological hazards of Astragalus membranaceus Bunge on the post-harvest processing. Samples from processing equipments (cleaner, water, cart, table, tray and packaging machine), personal hygiene (hand) and harvested crops (before washing, after washing, after sorting, and after drying) were collected from four farms (A, B, C, and D) located in Chungchengbuk-do, Korea. The samples were analyzed for sanitary indication bacteria and pathogenic bacteria. First, total aerobic bacteria and coliform in processing facilities were detected at the levels of 0.93~4.86 and 0.33~2.28 log CFU/$100cm^2$ and/mL respectively. In particular, microbial contamination in hand (5.43~6.11 and 2.52~4.12 log CFU/Hand) showed higher than processing equipments. Among the pathogenic bacteria, Bacillus cereus was detected at the levels of 0.33~2.41 log CFU/$100cm^2$, 1.48~3.27 log CFU/Hand and 0.67~3.65 log CFU/g in equipments, hands, and plants and Staphylococcus aureus were detected in cleaner, table, hand and harvested crops (before washing and after sorting) by qualitative test. Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella spp. were not detected. These results indicated that personal hygiene and processing equipments should be managed to reduce the microbial contamination of A. membranaceus Bunge. Therefore, management system such as good agricultural practices (GAP) criteria is needed for hygienic agricultural products.