• The Korean Journal of Community Living Science
• /
• v.22 no.1
• /
• pp.131-143
• /
• 2011

The purpose of this study was to investigate i) the current state of washing knowledge and washing habits ii) the effect of washing behaviors on washing satisfaction. A survey questionnaire was developed and implemented to married women in their 30's or 40's. A total of 210 responses were analyzed by frequency analysis, t-test and ANOVA with PASW18.0. The results are as follows. First, the ways in which women do the laundry was analyzed. Married women in their 30s and 40s usually do the laundry at home and are familiar with washing symbols and do not rely on common sense. Most of them like to rely on the washing machine guidelines for detergent concentration and use the right amount for environmental protection. They also adjust the washing machine setting effectively considering laundry time, water temperature and care label. Second, the groups divided by demographic variables showed meaningful results about washing knowledge. Particularly, there is no significant difference on washing knowledge between housewives and career women. Third, the groups divided by the levels of washing habits showed suggestive results about washing satisfaction. The groups who have correct washing habits generally a indicated high degree of washing satisfaction. Finally, marketing implications for the businesses of laundry, laundromat and the manufacturers of washing machine are suggested.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.389-397
• /
• 2010

This study was carried out to investigate the effect of washing machine type (drum or pulsator) on the behavior of clothing management and consumer satisfaction. The data were collected via questionnaires from 408 consumers and were analyzed through factor analysis, ANOVA, Cronbach's Alpha, utilizing SPSS 10.0. The results of this study were as follows: 1) 39.2% of consumers used drum washer and the number of users has increased sharply in five years. Drum washer consumers hold larger capacity washer than pulsator washer consumers. 2) Young people(under 40) showed statistically significant differences in terms of washing concern and the kinds of detergents, while old people(40 and above) showed statistically significant differences in terms of checking the label, preparing the laundry, and hand-washing. Married women showed statistically significant differences in checking the label, preparing the laundry, and hand-washing. 3) In terms of clothing management behavior with the type of washing machine, drum washer consumers showed statistically significant the amount of detergents, while pulsator washer consumers showed statistically significant handwashing and kinds of detergents. 4) In terms of customer satisfaction with the type of washing machine, drum washer consumers showed statistically significant brand satisfaction.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.237-243
• /
• 2019

This study analyzed satisfaction with and washing of newborn clothing (especially the innerwear washing behaviors) which are considered to be the most basic items among newborn clothing.The survey was conducted on mothers with children under 24 months old. Using an average of 6.7 innerwear items that were changed average 2.3 times a day with baby formula and breast milk representing the main contaminants. When washing clothes for a newborn, respondents were mainly concerned with: rinsing residual detergent, removing stains and contaminants, and sterilization and disinfection. Items were washed by a laundry label to prevent clothes damage. A baby-friendly or environmentally-friendly detergent was used to wash before being worn after purchase was separated and washed in various washing courses of the washing machine every day, boiled, rinsed an average 3.6 times, and dried mainly in the sun. Environmentally friendly cotton (59.5%) and organic cotton (41.6%) products were mainly used; however, items were washed separately from regular laundry. Respondents were satisfied with methods of washing. Consumers are concerned about washing because they think that washing affects a newborn's health. Therefore, it is necessary to provide consumers with appropriate information on washing and establish regulations for the use of harmful substances in newborn clothing and detergents.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.535-547
• /
• 2009

This study presented a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. For this purpose of this study, 6 jeans have been tested after washing finishing and we turned out appropriate shrinkage rate by evaluating the exterior of jeans and usage satisfaction. Then, a making method of jeans pattern was presented after applying the optimized shrinkage rate. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs, and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was 2.6${\sim}$5.2cm, hips circumference was 1.3${\sim}$4.2cm, thigh circumference was 0.8${\sim}$3.1cm and knee circumference was 0.7${\sim}$2.5cm. Also, hem circumference was 0.5${\sim}$1.8cm and pants length was 4.0${\sim}$6.2cm. That is, this results showed a wide range of addition and reduction according to material and washing finishing.

• Korean Journal of Human Ecology
• /
• v.19 no.6
• /
• pp.1063-1070
• /
• 2010

This study examined 12 types of towels with differing fabric material, function, quality, printing, pile length, twist, etc. from a towel company which manufactures and distributes products domestically. After 3 months of use by consumers, a consumer satisfaction survey was administered and results analyzed. Four types of towels were assigned to each group and the towels were used every day for 3 months. Participant feelings after using the towel for the first time and after using it for three months were investigated. The questionnaire consisted of 26 questions on a 5-point Licket-type scale. The first 13 questions measured perceptions of absorption, touch, fine fiber loss, contamination, deformation, drying speed, and design. Other questions compared differences between the two towel types in terms of their material, function, quality, printing, pile length, and degree of twisting. Results showed that, with regards to weight, consumers preferred towels between 130~150g and a thickness of around 1.7~1.8mm. The bamboo towel was considered superior to the cotton towel in terms of sense of touch and did not happen linter after washing. The antibacterial towel was considered better than the cotton towel in terms of absorption but in terms of contamination, participants felt the antibacterial towel became dirty more easily than the cotton towel. We thought that it might be influence of the color of towel. Low-quality towels became stiffer and misshapen more easily than higher-quality towels. But the study showed that the consumers did not perceive significant differences in the towels' quality. Printed towels became thinner and their color changed more with washing. The consumers preferred the design of jacquard towels to printed towels. Towels with short piles was happened more linter than the towel with long pile after washing. Non-twisted towel were better than the highly-twisted towel in terms of sense of touch and absorption but the non-twisted towel happened more linter after washing and became dirty more easily.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.8
• /
• pp.1231-1239
• /
• 2007

The purpose of this study was to investigate consumer's behaviors on the laundering of baby's clothing according to washing machine types. The subjects were 255 consumers with babies(0-2 years) in Korea. The data were collected with a self-administered questionnaire and analyzed by Chi-square test and multiple response analysis, and SPSS 12.0 statistics package was used. Consumers were separated into two groups according to washing machine types with general pulsator type and drum-type. Consumer's behaviors between general pulsator type group and drum-type group of washing machines were also examined. The results of this study were as follows. In the consumer satisfaction for washing machine, mostly drum-type group of consumers were satisfied with their washing machines. As the reasons of washing machine's dissatisfaction, noise, washing time and low washing efficiency were high in the pulsator type group, and washing time, noise and high price in the drum-type washing machine group. The consumers concerned about separation of clothing and laundering label while they washed laundry by washing machine. However, they didn't separate clothing because the small volume of laundry and a long washing time. The most interest and required thing of consumers was complete rinsing without any detergents used in washing as well as the removal of soils for baby's clothing regardless of two washing machine types. And they complained food soils like milk and mother's milk etc. were not completely removed by washing machine. As a whole the washing frequency of baby's laundry was once per a day and the rinsing also more than three times per a laundry. Most of the consumers used a private detergents for baby's clothing(detergents for baby's clothing only), and preferred to the high or boiled temperature washing as a desirable baby's laundering. There were significant differences between general pulsator type group and drum-type group of washing machines on the laundering of baby's clothing in this study.

• Korean journal of food and cookery science
• /
• v.13 no.4
• /
• pp.402-409
• /
• 1997

Understanding the satisfaction and dissatisfaction of employees has been deemed important for smooth and efficient food service management. The aim of this study was to examine the relationship between the dishwashing employees' job satisfaction and the operational and managerial factors in hospital foodservice systems. A survey of twenty conventional hospital food service systems was undertaken and detailed information was collected from 280 dishwashing employees through mailed questionnaires. Dishwashing employees' satisfaction was evaluated by measuring their job attitudes towards four aspects of their job using the modified Job Description Index (JDI). Descriptive analysis and Pearson product moment correlation analysis were used to analyze the data. The dishwashing workers were found to be more satisfied with their interpersonal relations with co-workers than with work content, pay or promotional opportunities. The demographic variables including education, type of employment and work experience were significantly related to job satisfaction. As the ratio of supervisors to dishwashing workers increased, the degree of satisfaction in dishwashing workers increased significantly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.846-850
• /
• 1996

Today's product development requires simultaneous satisfaction of low cost, high quality and fast time to market. It is, however, difficult for product designers and engineers to achieve this goal due to too many requirements. This study shows integrated Computer Aided Engineering (CAE) approach can help to achieve such goal. CAE can not only support designers when decision needs to be made during concept design period but also provide evaluation of the designed parts and guidance to the best design of products during detail design period. Furthermore, integration with virtual prototyping concept can reduce number of actual prototyping and consequently reduce product development cost and time considerably. In order to demonstrate its possibility, example of washing machine development using CAE and its results are presented in this study.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.507-514
• /
• 2022

This study is to compare and analyze the evaluation of cleaning cleanliness and usability according to the muscle activity and cleaning method in the wrist rotation motion when using a bottle washer for women with childbirth experience. To this end, when using an automatic bottle washer and a manual bottle washer, the muscle activity and cleaning cleanliness of the forearm muscles were quantitatively evaluated using equipment, and the effects of variables were analyzed and the following conclusions were obtained. First, it was found that the muscle activity was lower than that of the automatic baby bottle cleaner when using a manual bottle cleaner. Second, the cleanliness was judged to be the best in automatic washing (forward + reverse direction), followed by automatic washing (forward direction) and manual washing. Third, the usability evaluation of the use of the baby bottle washing machine showed higher satisfaction than that of the automatic baby bottle washing machine. Through these conclusions, this study can be used as basic data for product advancement in the future by proving the effectiveness of using an automatic bottle washer.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.191-203
• /
• 2007

The purpose of this study was to present a making method of jeans pattern with high fitness after deriving the appropriate shrinkage rate by material and washing process. According to the result of the exterior evaluation of test jeans, all 6 jeans were rated high with scores close to 3.5. Following the evaluation of satisfaction of usage by physical movement, the highest ranking was in the order of walking with normal steps, back bending $90^{\circ}$, chair sitting, climbing stairs and squatting. The shrinkage rate by physical area showed the highest score in the order of pants length, waist circumference, thigh circumference, knee circumference, hem circumference, hips circumference. In addition, the shrinkage rate was higher in warp direction than weft direction after washing finishing. As for the result of addition and reduction of pattern measurements by parts of jeans, waist circumference was $3.1{\sim}5.1cm$, hips circumference was $-1.2{\sim}4.2cm$, thigh circumference was $-0.9{\sim}3.1cm$ and pants length was $3.4{\sim}6.1cm$. That is, this results showed a wide range of addition and reduction according to material and washing finishing.