• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.5
• /
• pp.800-808
• /
• 1997

Decision process for length dimension in the mechanical system design process has been studied with a washing machine transmission as a model. The results are, (i) the length dimensions of the non-shaft elements are independent of other elements, (ii) the length dimensions of the shaft elements are dependent on the dimensions of the non-shaft elements located inside and outside of that elements, (iii) the length dimensions of the inner shaft elements are dependent on those of the outer shaft elements located parallel, (iv) the length dimensions of the shaft elements located serial are independent of each other.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.19-24
• /
• 2003

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.54-59
• /
• 2007

It is widely recognized that increasing the accuracy and diversity of rotating machinery necessitates an appropriate diagnostic technique and maintenance system. Until now, operators have monitored machinery using their senses or by analyzing simple changes to root mean square output values. We developed an expert diagnostic system that uses fuzzy inference to expertly assess the condition of a machine and allow operators to make accurate judgments. This paper describes the hardware and software of the expert diagnostic system. An assessment of the diagnostic performance for five fault phenomena typically found in pumps is also described.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.61
• /
• pp.75-87
• /
• 2000

This paper proposes a procedure for designing an accelerated test using SMAT(Stress, (failure) Mechanism and Test) model describing the relation among stress, failure mode/mechanism and test method. In SMAT model the stresses to be applied are derived from the environmental factor analysis, the relative importance of those stresses can be estimated using AHP(Analytic Hierarchy Process) and failure mode/mechanism and test method are derived from the fields failure information and FMEA(Failure Mode and Effect Analysis). By applying the procedure we can make a selection of major factors to cause the failure of assembly and design the accelerated test using DOE(Design of Experiments) The procedure is illustrated with an qualification test case study of washing machine shaft assembly in "A" electric appliance company.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.81-87
• /
• 2004

This paper describes a design method of electromagnetic interference (EMI) filter for pulse-width modulation (PWM) inverter-fed AC drives used for home appliances such as washing machine and air conditioner. The generating and coupling mechanisms of the conducted EMI for AC drives are first investigated. The design procedure of the EMI filter based on the EMI separation principle is then presented. Experiments we carried out for the PWM inverter-fed induction motor drive system and it is shown that the results satisfy the EN55014 EMI regulation.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.222-233
• /
• 2010

Developed in this research is a TP (tangible prototyping) system, which consists of two modules; (1) a virtual reality model to evaluate the functions and appearance of the product, and (2) a haptic device to emulate tactile and kinesthetic properties of mechanical dial knobs. As an example, a washing machine is modeled using a commercial CAD system and transformed in VRML and X3D formats. Some dynamic behaviors and kinematic characteristics are programmed using X3D script and Java. Various haptic behaviors of the dial are generated by modulating torque profile according to the rotation angle. A torque profile measuring system is developed to evaluate the behaviors of the haptic dial physically. Haptic sensibility evaluations are accomplished using the TP by semantic differential method.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.59-65
• /
• 2006

The purposes of using cutting fluid during cutting have been cooling, lubricating, chip washing and anti-corroding. However, the present manufacturing industry restricts the use of cutting fluid because cutting fluid contains poisonous substances which are harmful to the human body. Therefore environmentally conscious machining and technology have more important position in machining process because cutting fluids have significant influence on the environment in milling process. In this study, environmentally conscious machining can be obtained by the way of selecting the optimum machinig conditon using the design of experiment. Cutting using oil-mist showed better cutting characteristics than dry, air and fluid cutting with respect to by cutting force, tool wear and surface roughness. Also, the optimum machining condition for cutting using oil-mist could be selected through Taguchi method.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.49-55
• /
• 2011

Recently, various efforts to make more speedy and precision machine tool to improve productivity and also various efforts to solve environmental problem are going on, so that dry cutting in manufacturing industry, which needs environmental conscious design and development of manufacturing technique, is becoming a very important assignment to solve. Because dry cutting does not use cutting fluid, we need other methods that can be used instead of cutting fluid, which does cooling, lubricating, chip washing, and anti-corrosion. Especially, because turning is a continuous work, the consideration of tool life and surface roughness due to continuous heat and poor lubrication is important. The purposes of this paper are the consideration of how well the compressed air can work instead of cutting fluid, and also the development of the method to select the optimum machining condition by the minimum numbers of experiments through the Taguchi method.

• Architectural research
• /
• v.24 no.4
• /
• pp.93-103
• /
• 2022

In contemporary housing design, this cultural value has been ignored. Contemporary design has adapted quickly to global trends and houses have gradually lost their cultural identity (GhaffarianHoseini & Dahlan, 2012; Lim, 2001). Nevertheless, traditional housing culture persists in people's behavior and thoughts. Therefore, there is currently a pressing need to rebuild cultural identity in housing for cultural sustainability. This study aimed to analyze the traditional culture which was maintained, then transformed and disappeared in housing design through the quantitative survey and explore the cultural identity of Malaysian housing as a result. A quantitative survey was distributed to mothers of 129 married households living in a metropolitan area of Kuala Lumpur in August 2019. As a result, it was found that hosting guest was important even though the designated space (serambi) was disappeared. The LD/K layout, separating kitchen from living and dining area was philosophical and practical culture, still strong among older generation, but weakened among younger generation. To accommodate the traditional habit of diverse household work, wet kitchen, utility space for washing machine & drying, and outdoor space were needed to design carefully. When applied to future housing design, the findings will contribute to enhancing quality of life by strengthening residents' sense of place and social cohesion and by providing a culturally inherent design that eases the effects of globalization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.913-918
• /
• 2016

A three-way reversing valve, which provides rapid and accurate changes in the water flow direction without requiring any precise control device, is used in automotive washing machines to remove oil and dirt that remain on the machined engine and transmission blocks. Because of the complicated shape of the bottom-plug, however, cavitation occurs in the plug. In this study, the cavitation index and POC (percent of cavitation) were used to quantitatively evaluate the cavitation effect occurring in the bottom-plug on the downstream side. An optimal shape design was conducted via parametric study with a simple CAE model to avoid time-consuming CFD analysis and hard-to-achieve convergence. To verify the results of the numerical analysis, a flow visualization test was conducted using a specimen prepared according to ISA-RP75.23. In this test, the flow characteristics, such as cavitation occurring on the downstream side, were investigated using flow test equipment that included a valve, pump, flow control system, and high-speed camera.