Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Decision Process of the Length Dimension of a Mechanical System

기계 시스템의 길이제원 결정과정에 관한 연구

  • Cheon, G.J (Dept.of Mechanical Engineering, Wonkwang University) ;
  • Lee, J.H ( Dept.of Mechanical Engineering, Wonkwang University) ;
  • Han, D.C ( Dept.of Mechanical Engineering, Seoul National University)
  • 천길정 (원광대학교 기계공학과) ;
  • 이정한 (원광대학교 대학원 기계공학과) ;
  • 한동철 (서울대학교 기계학과)
  • Published : 1997.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Decision process for length dimension in the mechanical system design process has been studied with a washing machine transmission as a model. The results are, (i) the length dimensions of the non-shaft elements are independent of other elements, (ii) the length dimensions of the shaft elements are dependent on the dimensions of the non-shaft elements located inside and outside of that elements, (iii) the length dimensions of the inner shaft elements are dependent on those of the outer shaft elements located parallel, (iv) the length dimensions of the shaft elements located serial are independent of each other.

Keywords