• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.29-38
• /
• 1992

Approximate Constant Shear Angle Theory is usually used to take a transversal shear deformation of thick plate into consideration, which cannot be effectively considered the influence of transversal warping of cross-section with an increase of thickness. It right be the best way to represent the exact warping of cross-section. In this study, the derivation of warping function is attempted, and the effect of shear deformation and transversal warping is to be considered through the nolinear analysis of plate.

• 대한조선학회논문집
• /
• 제33권1호
• /
• pp.77-89
• /
• 1996

Mindlin 판이론에 바탕을 둔 두꺼운 판의 굽힘문제에 대한 유한요소 개발에 많은 연구가 수행되어 왔다. 두꺼운 판의 전단변형을 고려하기 위하여 주로 근사적인 일정전단회전각이론(CSAT)을 사용하여 왔지만, 두께가 두꺼워질수록 단면의 전단변형의 영향을 효과적으로 고려할 수 없을 것이다. 판 단면의 워핑(warping)을 가능한 정확하게 나타내는 것이 바람직할 것이다. 본 논문은 전단변형과 전단워핑의 영향을 고려한 새로운 판의 이론을 전개하고, Mindlin 판이론에 의한 결과와 비교 검토하기 위하여 다양한 파라미터 연구를 수행하여 두꺼운 판에 대한 전단변형과 전단워핑의 영향을 좀 더 깊이 고찰하고자 한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.334-340
• /
• 2013

This paper deals with the optimization of blade stiffened composite panels. The main objective of the research is to make response surfaces for the constraints. The response surface for warping thermal deformation was previously made for a fixed dimension composite structure. In this study, the dimensions of the blade stiffener were treated as design variables. This meant that a new response surface technique was required for the constraints. For the response surfaces, the lamination parameters, linear thermal expansions and dimensions of the structures were used as variables. A genetic algorithm was adopted as an optimizer, and an optimal result, which satisfied two constraints, was obtained. As a result, a new response surface was obtained, for predicting warping thermal deformation.

• Structural Engineering and Mechanics
• /
• 제84권4호
• /
• pp.453-464
• /
• 2022

Thin plates are the most common spatially stressed members in engineering structures that bear out-of-plane loads. Therefore, it is of great significance to study the deformation performance characteristics of thin plates for structural design. By constructing 12 basic displacement and deformation basis vectors of the four-node square thin plate element, a deformation decomposition method based on the complete orthogonal mechanical basis matrix is proposed in this paper. Based on the deformation decomposition method, the deformation properties of the thin plate can be quantitatively analyzed, and the areas dominated by each basic deformation can be visualized. In addition, the method can not only obtain more deformation information of the structure, but also identify macroscopic basic deformations, such as bending, shear and warping deformations. Finally, the deformation properties of the bidirectional thin plates with different sizes of central holes are analyzed, and the changing rules are obtained.

• Structural Engineering and Mechanics
• /
• 제21권1호
• /
• pp.19-33
• /
• 2005

An improved shear deformable thin-walled curved beam theory to overcome the drawback of currently available beam theories is newly proposed for the spatially coupled free vibration and elastic analysis. For this, the displacement field considering the shear deformation effects is presented by introducing displacement parameters defined at the centroid and shear center axes. Next the elastic strain and kinetic energies considering the shear effects due to the shear forces and the restrained warping torsion are rigorously derived. Then the equilibrium equations are consistently derived for curved beams with non-symmetric thin-walled sections. It should be noticed that this formulation can be easily reduced to the warping-free beam theory by simply putting the sectional properties associated with warping to zero for curved beams with L- or T-shaped sections. Finally in order to illustrate the validity and the accuracy of this study, finite element solutions using the isoparametric curved beam elements are presented and compared with those in available references and ABAQUS's shell elements.

• 한국항행학회논문지
• /
• 제16권2호
• /
• pp.367-374
• /
• 2012

박판 폐단면을 갖는 프레임과 같은 보가 warping 조건하에서 동적 거동 특성이 어떠한가를 시뮬레이션과 시험을 통하여 제시하였다. 비틀림 모멘트를 받는 보는 단면은 비틀림 뿐만 아니라 warping에 의해서 변형을 일으키게 된다. 어떤 박판 단면을 갖는 보에서는 warping이 매우 커서 축방향과 전단방향 응력을 발생하고 보의 비틀림에 저항이 크게 된다. 이 논문에서는 유한요소에서 warping restraint factor가 보의 변형 거동과 동적 모드에 미치는 영향을 살펴본다. 유한 보 요소와 박판 요소 모델을 사용하여 정적변형과 고유주파수 및 모드해석을 시뮬레이션하며 이 결과를 시험 결과와 비교한다.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.159-164
• /
• 2020

The response analysis of frame structure with open section beams considering warping conditions and short duration load have been performed. When a beam of frame structure is subjected under torsional moment, the cross section will deform a warping as well as twist. For some thin-walled sections warping will be large, and accompanying warping restraint will induce axial and shear stresses and reduce the twist of beam which stiffens the beam in torsion. Because of impact or blast loads, the wave propagation effects become increasingly important as load duration decreases. This paper presents that a warping restraint in finite element model effects the behavior of beam deformation, dynamic mode shape and response analysis. The computer modelling of frame is discussed in linear beam element model and linear thin shell element model, also presents a correlation between computer predicted and actual experimental results for static deflection, natural frequencies and mode shapes of frame. A method to estimate the number of normal modes that are important is discussed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.849-859
• /
• 2013

This paper proposes a real-time simulation technique for thin rods undergoing large rotational deformation. Rods are thin objects such as ropes and hairs that can be abstracted as one-dimensional structures. Development of a real-time physical model that can produce visually convincing animation of thin rods has been a challenging problem in computer graphics. We adopt continuum mechanics to formulate the governing equation, and develop a modal warping technique for rods to integrate the governing equation in real-time; This is a novel extension of the previous modal warping techniques developed for solids and shells. Experimental results show that the proposed method runs in real-time even for large meshes and it can simulate large bending and/or twisting deformations.

• Structural Engineering and Mechanics
• /
• 제60권6호
• /
• pp.1039-1061
• /
• 2016

Based on Vlasov's torsional theory of open thin-walled members and the nonlinear constitutive relations of materials, a nonlinear analysis model to predict response of open thin-walled RC members subjected to pure torsion is proposed in the current study. The variation of the circulatory torsional stiffness and warping torsional stiffness over the entire loading process and the impact of warping shear deformation on the torsion-induced rotation of the member are considered in the formulation. The torque equilibrium differential equation is then solved by Runge-Kutta method. The proposed nonlinear model is then applied to predict the behavior of five U-shaped thin-walled RC members under pure torsion. Four of them were tested in an earlier experimental study by the authors and the testing data of the fifth one were reported in an existing literature. Results show that the analytical predictions based on the proposed model agree well with the experimental data of all five specimens. This clearly shows the validity of the proposed nonlinear model analyzing behavior of U-shaped thin-walled RC members under pure torsion.

• 한국지진공학회논문집
• /
• 제7권4호
• /
• pp.1-13
• /
• 2003

본 연구에서는 전단변형을 고려한 비대칭 박벽 곡선보의 자유진동해석을 수행할 수 있는 일반이론을 제시하기 위하여, 3차원 연속체에 대한 가상일의 원리로부터 전단변형 효과를 고려하고 비대칭 박벽단면과 ？(Warping)을 포함하는 변위장을 도심 축에 대해 정의한 후 곡선보의 변형도-변위관계로부터 공간 박벽 곡선보의 일반화된 탄성변형에너지와 운동에너지를 새롭게 유도한다. 또한, 전단변형이 고려된 곡선보의 총포텐셜에너지에 대해 변분을 취함으로써 평형방정식과 힘-변위관계를 제시한다. 한편, 제시된 이론에 대해 등매개 보요소를 도입하여 유한요소 정식화를 수행하였으며 곡선보의 동적 거동특성을 조사하기 위하여 전단변형, 곡률효과 그리고 진동모드에 대한 매개변수 연구를 수행한다. 마지막으로, 본 연구의 타당성을 입증하기 위하여, 다양한 해석예제에 대한 3차원 고유진동수를 산정하고 타 연구자들의 결과 및 ABAQUS의 쉘요소를 이용한 해석결과와 비교ㆍ검증한다.