• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.39-63
• /
• 1991

A PC-based ship maneuvering simulator was developed which was configured in a high performance IBM PC compatible i486 and i286 computer with a TMS 340 graphic signal processor and 10 MBPS Ethernet Cards. A real-time ship maneuvering simulation program was developed which includes computer generated imagery (CGI) for bird's eye view type and perspective view type. The simulator H/W was designed and manufactured and S/W for interface of various navigation equipments was made Especially, programs for output, analysis, and assessment of simulations results were developed. Communications between PC's are made by using Ethernet bus type LAN system. Simulations could be performed under various environments (current, wind, wave etc.) using data base of harbors and ships. This system can be used for various purposes such as crew's training, harbor and waterway design, and assessment of ship maneuverability in harbor.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.603-614
• /
• 2005

The wireless LAN environment using Mobile IP is constructed and managed to be connected with Ethernet based wired networks. However, there have been many problems with wireless networks using Mobile IP. Some important facts on network performance have not been considered when introducing wireless LAN by Mobile IP to wired networks. In this paper, we suggest schemes which can solve problems on Handover latency caused by the asymmetrical connectivity of the Access Router at applying the HMIPv6 and on binding updates due to the MN frequent movement. Our proposed schemes can reduce network latency by using the HMIPv6 architecture with a virtual router layer, and reduce communication overhead by interchanging information of the MN movement between routers. Our schemes are expected to assist in constructing a more real and effective wireless LAN environment based on the HMIPv6 and FMIP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.493-497
• /
• 2005

This paper is about the research of the User Agent implementation under wireless embedded environment, using SIP which is one of protocol components construct the VoIP system. The User Agent is made of the User Agent configuration block, the device thread block to control devices and the SIP stack block to process SIP messages. The device thread consists of the RTP thread and the sound lard device processing block. Futhermore, the SIP stack consist of the worker thread to process proxy events, the SIP transceiver and SIP thread to transfer and receive SIP messages. The H/W platform is a board included the Intel's XScale PXA255 processor, flash memory, SDRAM, Audio CODEC module and wireless LAN threough PCMCIA socket, furthermore a microphone and headphone is used by the audio 1/0. The system has embedded linux kernel 2.4.19. For embedded environment, the function of User Agent and SIP method is diminished. Finally, the resource of system could be reduced about $12.9\%$, compared to overall system resource, by minimizing peripherals control and excepting TCP.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.65-69
• /
• 2006

Cellular network evolution and development of multi-function cellular phones introduce new mobile business mode. Cellular operators provide mobile internet services using the mobile browser such as ME and WAP and the mobile multimedia platform such as WIPI, J2ME, and BREW. New mobile applications are developed using mobile platforms provided by cellular operators as cellular phones having multimedia solutions such as camera, MP3, MPEG, 3D game engine, DMB, PAN such as bluetooth, IrDA, W-LAN, and location information using GPS are developed. Content providers have problems of redevelopment of a mobile application for different mobile platforms. In this paper, we propose a conversion solution for interoperability of applications developed on different mobile platforms of WIPI and BREW. We analyze APIs of WIPI and BREW and develop conversion solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.697-704
• /
• 2004

This paper describes the design and fabrication of an MMIC variable gain LNA for 5GHz wireless LAN applications, using 0.5${\mu}{\textrm}{m}$ gate length GaAs MESFET transistors. The advantages of high gain and low noise performance of E-MESFETS and excellent linear performance of D-MESFETS are combined as a cascode topology in this design. Behavioral model equations are derived from the MESFET nonlinear current voltage characteristics by using Turlington's asymptote method in a cascode configuration. Using the behavioral model equations, a 4${\times}$50${\mu}{\textrm}{m}$ E-MESFET as a common source amplifier and a 2${\times}$50${\mu}{\textrm}{m}$ D-MESFET as a common gate amplifier are determined for the cascode amplifier. The fabricated variable gain LNA shows a noise figure of 2.4dB, variable gain range of more than 17dB, IIP3 of -4.8dBm at 4.9GHz, and power consumption of 12.8mW.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.59-70
• /
• 2003

Proposed CCRSVP (Candidate Casting RSVP) algorithm is a new fast handoff method which uses advanced multicasting method and RSVP for IEEE 802.11 Wireless LAN (WLAN) environments. The proposed algorithm shows good performance in the handoff latency and the B/W efficiency aspect and guarantees QoS because it uses L2 information (BSSID) of WLAN and starts to reserve resources and multicast packets before L2 handoff completes. We also propose a Markov chain performance analysis model in which we can analyze the handoff performance of various handoff algorithms. Using the model, we compare bandwidth efficiency of the proposed algorithm with existing handoff algorithms which use RSVP by analyzing blocking probability of session, resource usage, and the average number of ongoing session in a cell. The results show that the proposed algorithm shows better performance than the existing algorithms in the above three performance aspects.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.338-346
• /
• 2018

In this paper, a monopole antenna applicable to WLAN/WiMAX system is designed and fabricated. The proposed antenna is designed to have three lines and one slit based on microstrip feeding to have triple band characteristics. We optimized the lengths and slits of the three lines to obtain the required characteristics for this paper. The proposed antenna has $32.0mm(W2+W3){\times}47.1mm$ (L3+L4+L5+L8) on a dielectric substrate of $42.5mm(W1){\times}52mm(L1){\times}1.0mm$ size. From the fabrication and measurement results, bandwidths of 158 MHz (813 to 971MHz), 630 MHz (2.10 to 2.73GHz) and 1190 MHz (4.83 to 6.02GHz) were obtained based on the impedance bandwidth. The fabricated antenna also obtained the measured gain and radiation pattern in the required triple band.

• Information and Communications Magazine
• /
• v.4 no.4
• /
• pp.505-524
• /
• 1987

Nowaday all the countries of the world have studied the various problems caused in operating their own ports efficiently. Ship delay in the port is attributal to the inefficient operation in the navigation aids, the cargo handling, the storage and transfer facilities, and to the inefficient allocation of gangs or to a bad service for ships. Among these elements the allocation of gangs is the predominating factor in minimizing ship's turn round time. At present, in the case of Pusan Port. the labour union and stevedoring companies allocate gangs in every hatches of ships by a rule of thumb, just placing emphasis on minimizing ship's turn round time, without applying the principle of allocation during the cargo handling. Owing to this the efficiency of the cargo handling could not be expected to be maximized and this unsystematic operation result in supplying human resources of much unnecessary surplus gangs. Therefore in this paper the optimal size and allocation of gangs for minimizing the ship's turn round time is studied and formularized. For the determination of the priority for allocation the evaluation function, namely $F=PHi^{n}{\times}(W+H)$, can be obtained; where, PHI : Principal Hatch Index W : Total Cargo Weight represented in Gang-Shifts H : Total Number of Ship's hatches and also for the optimal size of gangs the average number of gang allocated per shift (Ng), namely Ng=W/PHI, is used. The proposed algorithm is applied to Pusan Port and its validity is verified.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.1
• /
• pp.70-76
• /
• 2019

Ultra Wideband (UWB) Radar is a high-resolution radar for short distance detection which uses signals transmitted and received by each antennas in order to detect a target. It is possible to detect the respiration and heartbeat of a person without contact It is getting more and more often utilized since it is not affected by physical environment. In this paper, we implement an algorithm to detect human respiration and heartbeat rate using UWB radar signal. We process radar signals reflected from human body using Median filter, Kalman filter, Band Pass filter and so on. We also use CZT to extract breathing and heart rate. ECG (Electrocardiogram) was used for comparison of heartbeat data and we confirm that each data of ECG and UWB Radar were more than 98% identical each other.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.627-633
• /
• 2022

To realize uniform side pumping of solar lasers and improve their output power, a solar concentrating system based on off-axis parabolic mirrors is proposed. Four identical off-axis parabolic mirrors with focal length of 1,000 mm are toroidally arranged as the primary concentrator. Four two-dimensional compound parabolic concentrators (2D-CPCs) are designed as a secondary concentrator to further compress the focused spot induced by the parabolic mirrors, and the focused light is then homogenized by four rectangular diffusers and provides uniform pumping for a laser-crystal rod to achieve solar laser emission. Simulation results show that the solar power received by the laser rod, uniformity of the light spot, and output power of the solar laser are 7,872.7 W, 98%, and 351.8 W respectively. This uniform pumping configuration and concentrator design thus provide a new means for developing high-power side-pumped solid-state solar lasers.