• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.9
• /
• pp.1215-1221
• /
• 2009

The purpose of this work was to improve the quality of Jeungpyun made with rice sourdough, which was prepared using a mixed culture of Saccharomyces cerevisiae (S. cerevisiae) and Leuconostoc mesenteroides (L. mesenteroides) strains, and to also develop a new process for Jeungpyun preparation using the rice sourdough. The Jeungpyun was manufactured through proofing for 3 hr at $30^{\circ}C$ and steaming steps after mixing the ingredients, including pre-fermented rice sourdough, rice powder and water. After proofing, the expansion ratio of the Jeungpyun dough ranged from 109 to 135% and the pH was decreased to pH 3.80$\sim$4.09. The volumes of the Jeungpyun samples prepared with rice sourdough were 18$\sim$45% greater than that of the control. In particular, the Jeungpyun made with rice sourdough containing 10% brown rice (CM-10) had a significantly greater volume (266 mL). Also the rice sourdough Jeungpyun samples had well developed dense porous structures compared to the control. According to sensory evaluations, the sample prepared with rice sourdough containing 10% brown rice was preferred. Finally, the physical quality (texture properties) and microbiological shelf-life of the Jeungpyun was improved by using the rice sourdough.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.655-665
• /
• 1993

The added levels of dongdong-ju, soy bean and fermentation time were selected as factors affecting the quality of Jeung-pyun (Korean fermented steamed rice cake) through pretest. The standing height ratio was significantly raised after the 1st and 2nd fermentation by the soy bean treatment. As the amount of dongdong-ju and soy bean were increased, the values of specific volume and expansion ratio for Jeung-pyun were increased. The effects of fermentation time did not show any significant differences. The pH of Jeung-pyun dough was significantly higher when the amount of dongdong-ju decreased and the amount of soy bean increased. Reducing sugar content of Jeung-pyun significantly augmented with raised amount of soy bean. As the amount of soy bean was increased, the hardness, springiness and cohesiveness of Jeung-pyun measured by rheometer significantly decreased. The optimum conditions for Jeung-pyun preparation were found to be 30g dongdong-ju, 2g soy bean solid and 180 minutes of fermentation time per 100g rice flour basis. Soy bean treatment had primary influence on Jeung-pyun preparation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.259-271
• /
• 2006

This paper aims to predict the corrosion of a fully cement-grouted rockbolt induced by chloride diffusion in a cement mortar grout. From the viewpoint of the long-term durability, a rockbolt may be deteriorated by chemical components, such as sulphate and chloride, in groundwater. Especially, the steel rod of a rockbolt is corroded mainly by chloride. The rockbolt corrosion results in the volume expansion of a rod and then the cracking of a cement grout. In this study, the chloride diffusion coefficient of a cement mortar grout was used to evaluate the possibility of rockbolt corrosion by chloride, and to predict the long-term durability of a rockbolt. The electric acceleration test method was adopted to measure the chloride diffusion coefficient. In addition, a simple pullout testing system was newly proposed to measure the pullout capacity of a rockbolt more easily in a laboratory condition. From the experiments, it was showed that the chloride could diffuse in the cement grout more easily than in ordinary concrete materials. As a result, it was considered that a rockbolt might be easily corroded in a short term by the diffusion of chemical components with high concentration, although it was fully grouted.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.361-368
• /
• 2004

We separated the multilayer structure of CD-R(compact disk-recordable) and investigated optimal spot marking conditions and physical and chemical transitions in response to various laser beam energh levels. Spot marking(80 ${\mu}{\textrm}{m}$ spot size) was produced on the surface of each layer using a Q-switched Nd:YAG laser between 27 mJ and 373mJ. By investigating resulting pit formation with Optical Microscopy(OM) and Optical Coherence Tomography(OCT), we analyzed the formation process of spot marking in the multilayer structure of different chemical composition. The localized heating of the substrate in the multilayer thin film caused the short temporal thermal expansion, and absorbed optical energy between reflective and dye interfaces melted dye and increased the volume. During the cooling phase, formation of pit and surrounding rim can be explained by three distinct processes; effect of surface tension, evaporation by spontaneous temperature increase due to laser energy, and mass flow from the recoil pressure. Our results shows that the spot marking formation process in the multilayer thin film is closely related to the layers' physical, chemical, and optical properties, such as surface tension, melt viscosity, layer thickness, and chemical composition.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.107-115
• /
• 2014

Recently, increased use of the internet resulted in generation of large and diverse types of data due to increased use of social media, expansion of a convergence of among industries, use of the various smart device. We are facing difficulties to manage and analyze the data using previous data processing techniques since the volume of the data is huge, form of the data varies and evolves rapidly. In other words, we need to study a new approach to solve such problems. Many approaches are being studied on this issue, and we are describing an effective design and development to build indexing engine of big data platform. Our goal is to build a system that could effectively manage for huge data set which exceeds previous data processing range, and that could reduce data analysis time. We used large SNMP log data for an experiment, and tried to reduce data analysis time through the fast indexing and searching approach. Also, we expect our approach could help analyzing the user data through visualization of the analyzed data expression.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.187-194
• /
• 2012

The strength of particle-reinforced metal matrix composites is, in general, known to be increased by the geometrically necessary dislocations punched around a particle that form during cooling after consolidation because of coefficient of thermal expansion (CTE) mismatch between the particle and the matrix. An additional strength increase may also be observed, since another type of geometrically necessary dislocation can be formed during extensive deformation as a result of the strain gradient plasticity due to the elastic-plastic mismatch between the particle and the matrix. In this paper, the magnitudes of these two types of dislocations are calculated based on the dislocation plasticity. The dislocations are then converted to the respective strengths and allocated hierarchically to the matrix around the particle in the axisymmetric finite-element unit cell model. The proposed method is shown to be very effective by performing finite-element strength analysis of $SiC_p$/Al2124-T4 composites that included ductile failure in the matrix and particlematrix decohesion. The predicted results for different particle sizes and volume fractions show that the length scale effect of the particle size obviously affects the strength and failure behavior of the particle-reinforced metal matrix composites.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.650-655
• /
• 2008

In an attempt to establish the mass proliferation system, Eucalyptus pellita, a 5-year-old plus tree, was cultured with three different culture types in 1L vessels: solid culture without ventilation (conventional culture), liquid culture without ventilation and open-type liquid culture with forced ventilation. Then the culture scale was subsequently increased from 1L to 10L in vessel volume. After 4 weeks of 1L-scale culture, the best growth was obtained by culturing plantlets on open-type liquid culture, suggesting that the in vitro plantlets growth can be enhanced by liquid medium and ventilation. In open-type large scale culture in 10L vessel, plantlets growth resulted in a 370% increase in the number of nodes, 3.6 times increase in leaf expansion, and 3.3 times increase in shoot length, while the conventional culture suppressed shoot growth due to the callusing on the leaves and lack of $CO_2$. The results indicated that the open-type large scale culture system was effective for enhancing productivity by improving growth of the plantlets in clonally proliferated plus tree, Eucalyptus pellita.

• Journal of East Asia Management
• /
• v.1 no.1
• /
• pp.65-87
• /
• 2020

In recent years, with the rapid development of network live streaming, with the popularization of mobile Internet and mobile terminal equipment, the live streaming industry has ushered in great development. A sudden outbreak of the COVID-19 makes the PC end live streaming which has been developed for many years enter a new era, giving birth to the rapid development of mobile end live streaming. Not only because of the expansion of the live streaming industry market, the rise of the trend of the national live streaming, but also because the mobile live streaming is more and more valued by the brand, becoming an important tool for brand communication and product promotion. It is because of its unique communication characteristics that some scholars believe that the era of precision marketing has been opened by live network. Mobile live from the initial fans to reward and promote the brand, to now in the form of live marketing, consumers can "buy while watching". The time period from the understanding of the goods to the final completion of the purchase behavior has been greatly shortened. It is conducive to improving sales volume and brand awareness. Marketing communication through mobile live platform has become a popular way of brand marketing. This paper mainly studies the current situation, methods, problems and development strategies of brand marketing activities with the help of live streaming platform under the background of mobile internet. Taking Tmall live streaming platform as an example, this paper analyzes several ways of brand marketing with the help of live streaming and some universal characteristics of live streaming marketing by using the relevant theories of marketing. In view of the problems existing in live streaming brand marketing, it puts forward relevant Improvement measures. First of all, the paper puts forward the innovation in content and form. Second, the paper suggests that we should make full use of new technologies such as AR and VR to effectively combine with mobile live broadcasting. Third, the paper explores the integration of multiple channels to create intelligent marketing, and further optimize the live interface of mobile terminals. Finally, the paper emphasizes that the government departments and the platform itself should jointly supervise the mobile network live streaming platform and establish a good live broadcasting environment for mobile terminals. With the help of mobile live streaming, the marketing mode has an important impact on the promotion of brand marketing. How to make better use of this business mode and accurately use mobile live broadcast to promote brand marketing, so that enterprises can create greater profits, is also of profound research significance.