• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.106-108
• /
• 2008

This paper describes output characteristics analysis of outage and phase jump generator for microgrid. The outage and phase jump can be generated with 3-phase voltage disturbance generator. As soon as the outage occurs the STS(Solid Transfer Switch)s are switched off. At the beginning of the outage the PCS is required to limit the reverse current within the rated PCS output current. In case of phase jump the PCS output voltage phase should be adjusted. The generator output characteristics are analysed through simulation.

• 한국전기전자재료학회논문지
• /
• 제27권10호
• /
• pp.648-652
• /
• 2014

We have investigated the effect of electrical properties of amorphous InGaZnO thin film transistors (a-IGZO TFTs) by post thermal annealing in $O_2$ ambient. The post-annealed in $O_2$ ambient a-IGZOTFT is found to be more stable to be used for oxide-based TFT devices, and has better performance, such as the on/off current ratios, sub-threshold voltage gate swing, and, as well as reasonable threshold voltage, than others do. The interface trap density is controlled to achieve the optimum value of TFT transfer and output characteristics. The device performance is significantly affected by adjusting the annealing condition. This effect is closely related with the modulation annealing method by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• 대한기계학회논문집B
• /
• 제29권4호
• /
• pp.477-484
• /
• 2005

Model fer the dynamic simulation of dynamic behaviors of a solid oxide fuel cell (SOFC) is provided. This model is based upon (1) coupled mass and heat transfer characteristics and (2) important chemical reactions such as electrochemical and reforming reactions in high temperature fuel cells such as SOFC. It is found that the thermal inertia of solid materials in SOFC plays an important role to the dynamic behavior of cell temperature. Dynamic characteristics of cell voltage, power, and chemical compositions with different levels of load change are investigated.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.637-644
• /
• 2019

Wireless power transfer (WPT) technology with various transfer mechanisms such as inductive coupling, magnetic resonance and capacitive coupling is being widely researched. Until now, power transfer efficiency (PTE) and power transfer capability (PTC) have been the primary concerns for designing and developing WPT systems. Therefore, a lot of studies have been documented to improve PTE and PTC. However, power consumption in the standby mode, also defined as the no-load mode, has been rarely studied. Recently, since the number of WPT products has been gradually increasing, it is necessary to develop techniques for reducing the standby power consumption of WPT systems. This paper investigates the standby power consumption of commercial WPT products. Moreover, a standby power reduction technique for WPT systems via magnetic resonance coupling (MRC) with a parallel resonance type resonator is proposed. To achieve a further standby power reduction, the voltage control of an AC/DC travel adapter is also adopted. The operational principles and characteristics are described and verified with simulation and experimental results. The proposed method greatly reduces the standby power consumption of a WPT system via MRC from 2.03 W to 0.19 W.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.951-954
• /
• 2003

A CMOS second generation current conveyor, which can be operated from a low-voltage power supply, is presented in this article. The proposed circuit is simple, small in size and suitable for implementing in standard CMOS process. It provides the resistance at port X lower than 3.5${\Omega}$. The bandwidth of the transfer characteristic extends beyond 326MHz. PSPICE simulation results demonstrating the characteristics of the proposed circuit are included.

• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.539-542
• /
• 2011

Thin-film transistors (TFTs) are fabricated using an amorphous indium gallium zinc oxide (a-IGZO) channel layer by rf-magnetron sputtering. Oxygen partial pressure significantly changed the transfer characteristics of a-IGZO TFTs. Measurements performed on a-IGZO TFT show the change of threshold voltage in the transistor channel layer and electrical properties with varying $O_2$ ratios. The device performance is significantly affected by adjusting the $O_2$ ratio. This ratio is closely related with the modulation generation by reducing the localized trapping carriers and defect centers at the interface or in the channel layer.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.932-942
• /
• 1995

A spacecraft power system can be divided into two types : DET system(Direct Energy Transfer system) and PPT system(Peak Power Tracking system). In a DET system employing the regulated bus voltage control method, the battery charger and discharger are widely used for the bus voltage regulation. The battery charger has two different modes of operation. One is the bus voltage regulation mode and the other is the charge current regulation mode. The battery discharger is employed to provide the power when the spacecraft is in the earth's shadow or the sun is eclipsed. The operating mode, charging or discharging, is selected by a power control circuit. In this paper, small-signal dynamic characteristics of battery charging and discharging system are analyzed to facilitate design of control loop for optimum performance. Control loop designs in various operating modes are discussed. Anaylses are verified through experiments.

• 전자공학회논문지B
• /
• 제33B권10호
• /
• pp.139-147
• /
• 1996

In this study a two-stage fast pulse generaor using magnetic switches is proposed. The scheme consist of a switch, an inductor and two pairs of capacitor and saturable inductors, a linear transformer. The basic principle and the operation are described using a set of given parameters. The main issue of the magnetic pulse genration scheme is the system efficiency. This study focuses on the system efficiency improvement using magnetic switches. The voltage compression ratio, energy transfer with respect to core area are investigated. The output voltage and transferred energy as a function of input voltage are also included. Also, an analysis and experiments are performed to verify the porposed topology by implementing a 10[J] class experimental circuit. The efficiency of the transferred energy a tload side is 82%.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.790-795
• /
• 1998

Fabrication of inverted staggered power TFT devices and electrical characteristic were investigated. 16 fingers with drain and source electrode of TFT and 100V output voltage were designed successfully. It is observed that as $V_g$ increased, $I_d$ increase exponentially. Because of localized deep states of a-Si, $I_d$ shows irregular variation at low voltage. Output and transfer characteristic showed the same as typical variation. But electrical characteristic strongly depend on the channel length and thickness of silicon nitride and amorphous silicon.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.63-69
• /
• 1992

2개의 단위전지를 제작하여 각각 산소와 공기를 산화제로 하여 조업하였다. 산소를 사용한 단위전지의 350시간 조업후의 개전압 강하는 30mV였고 내부저항도 증가하였다. 공기를 사용한 단위천지의 250시간 조업후의 개전압강하는 130mV였고 산소를 사용한 경우와는 개전압 차이는 90mV였다. 공기를 이용한 단위전지의 조업 성능을 향상시키기 위하여는 전해질의 공급방법과 전극의 물질전달특성에 관한 연구가 필요하다.