• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.103-112
• /
• 2014

BY the Transformers and reactors, the input electrical energy is converted into magnetic energy. At the end through the magnetic energy was passed at the output parameter. Specially At the flyback transformer or a reactor airgap were designed to contain more magnetic energy. But that work is very difficult for the optimal design. It is that Contradictions are between the length of the Air-gap, Winding inductance, DC bias. As to e Several conflicting conditions in order to determine the optimum Air-gap has a lot of experience and trial & error is necessary. The approach proposed in this paper, the auxiliary winding on the core attached to part of primary core, that by applying a DC voltage has a dramatic effect like Core with designed Air-gap. This inventiveness and advantage is to regulate arbitrarily the Saturation Flux Quantity by the input signal to secondary winding. Accordingly obtained the biggest effect is that increasing limits of the saturation current destined by the material and shape of the conventional core. In other words, that can decreas the size of the transformer and reactor, While maintaining the current saturation capacity. This paper, prove its effect as using the local flux saturation in transformers and reactors for research by the computer program using the finite element method (FEM) simulation, followed by actual experiment to verify

• 공업화학
• /
• 제16권4호
• /
• pp.507-512
• /
• 2005

리튬 이온 2차 전지의 부극으로 사용되는 탄소전극은 초기 충전시 전극 표면에 Solid Electrolyte Interphase (SEI)라고 불리는 부동태 피막을 형성한다. 초기 충전과정에서의 용매분해로 형성된 막은 충방전 용량에 큰 영향을 주는 것으로 조사되었다. 본 연구에서는 Kawasaki Mesophase Fine Carbon 부극과 1 M $LiPF_6,EC:DEC$ (1:1, 부피비)에 $Li_2CO_3$를 첨가하여 전극/전해질 계면에서 초기충전 온도에 따라 형성되는 부동태 피막의 전기화학적 특성을 시간대 전압법, 순환 전압-전류법, 임피던스법을 이용하여 조사하였다. 관찰된 결과에 따르면, 용매분해 반응이 일어날 때 리튬 이온의 전도도에 따라 용매분해 전위가 달라졌으며, 저온으로 갈수록 $Li^+$ 이온의 전도성이 떨어져 분해 전위 차이가 나타남을 알았다. 또한 여러 온도조건에서 초기 충전시 형성된 피막의 저항은 온도별로 달라짐을 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.159-165
• /
• 2003

뇌자도 측정을 위해 고감도 superconducting quantum interference device (SQUID) 자력계 및 37채널 뇌자도 측정장치를 제작하고 동작특성을 조사하였다. 자속-전압 변환계수 및 변조전압 진폭이 큰 double relaxation oscillation SQUID (DROS)를 사용함으로서 구동회로를 간단히 하였고 안정한 SQUID 동작을 실현할 수 있었다. DROS 자력계를 설계 및 제작한 결과 자력계의 평균 백색잡음은 약 3 fT/√Hz으로서 우수한 자장감도를 가짐을 확인하였다 머리의 평균곡률을 기반으로 37개의 자력계를 반구형으로 배치시켰으며, 외부잡음을 줄이기 위해 신호채널 외에 11개의 기준채널을 설치하여 소프트웨어 방법으로 합성미분계 및 적응필터링을 형성할 수 있도록 하였다 저잡음 듀아를 제작하여 동작특성을 측정한 결과 듀아 열자기 잡음이 자력계 잡음에 비해 무시할 수 있는 수준이었으며, 듀아의 용량은 30 L, 액체헬륨 증발율은 4 L/d이다. 제작된 시스템을 이용하여 청각유발 신호를 측정하고, 디지털 신호처리 및 전류원 국지화 프로그램을 구성하여 전류원의 위치를 추정함으로서 개발된 시스템을 뇌자도 측정에 활용하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.10-13
• /
• 2015

High-temperature superconducting coated conductors (HTS-CCs) are good candidates for resistive superconducting fault current limiter (RSFCL) applications. However, the high current density they can carry and their low thermal diffusivity expose them to the risk of thermal instability. In order to find the best compromise between stability and cost, it is important to study the heat transfer between HTS-CCs and the liquid nitrogen ($LN_2$) bath. This paper presents an experimental method to monitor in real-time the temperature of a quenched HTS-CC during a current pulse. The current and the associated voltage are measured, giving a precise knowledge of the amount of energy dissipated in the tape. These values are compared with an adiabatic numerical thermal model which takes into account heat capacity temperature dependence of the stabilizer and substrate. The result is a precise estimation of the heat transfer to the liquid nitrogen bath at each time step. Measurements were taken on a bare tape and have been repeated using increasing $Kapton^{(R)}$ insulation layers. The different heat exchange regimes can be clearly identified. This experimental method enables us to characterize the recooling process after a quench. Finally, suggestions are done to reduce the temperature increase of the tape, at a rated current and given limitation time, using different thermal insulation thicknesses.

• Journal of Electrochemical Science and Technology
• /
• 제8권2호
• /
• pp.155-161
• /
• 2017

Carbon felts were prepared under various thermal conditions to improve the electrochemical properties of vanadium redox flow batteries. The number of C-O and/or C-OH functional groups on the surface of the electrodes treated under airless conditions was much larger than that of the untreated and partially oxygen-treated electrodes. The carbon felt treated under airless conditions had the lowest surface area. The overall kinetic properties of the redox reaction were greatly improved for the carbon felt treated under airless conditions; i.e., the reversibility of the anodic and cathodic reactions associated with the $VO_2{^+}/VO^{2+}$ couple became more reversible. Single-cell tests indicated that the carbon felt exhibited an excellent discharge capacity of $3.1Ah{\cdot}g^{-1}$ at $40mA{\cdot}cm^{-2}$, and the corresponding Coulombic, voltage, and energy efficiencies were 89.5%, 91.8%, and 82.2%, respectively.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.86-91
• /
• 2010

The purpose of this study is to analyze the damage patterns and metal structure of 3 phase mold transformers collected from places where accidents have occurred. Compared to an oil-immersed transformer, a mold transformer has the advantage of requiring a smaller installation area and can be kept clean, while its disadvantages include the fact that abnormal symptoms of an accident are difficult to discover and its repair is impossible. The capacity of the mold transformers collected from places where accidents have occurred was 200kVA with primary voltages being F23,900V, R22,900V, 21,900V, 20,900V, 19,900V, etc., as well as secondary voltages being 380V, 220V, etc. It was found from the analysis on the diffusion of combustion in the damaged mold transformers that fire occurred first inside the U-phase primary winding and that carbonization and heat were diffused to V-phase and W-phase in V-pattern. In addition, from the analysis on the cross-sectional structure of the metal of the melted high voltage winding using a metallurgical microscope, it was found that the boundary surface, voids, and columnar structure were formed when an interlayer short-circuit had occurred Therefore, even though it is not possible to find the cause for the occurrence of an interlayer short-circuit at the inner side of the primary winding, it is thought that, due to the thermal energy generated when the short-circuit occurred, the heat source was diffused to the upper side and outside, causing a secondary accident.

• 전력전자학회논문지
• /
• 제25권5호
• /
• pp.376-384
• /
• 2020

An energy storage system is composed of lithium-ion batteries in modern applications. Batteries are regarded as storage devices for renewable and residual energy. The failure of batteries can cause the performance reduction and explosion of battery systems. High maintenance cost is essential when dealing with the problem of battery safety. Therefore an accurate health diagnosis is required to ensure the high reliability of battery systems. A battery pack is a combination of single cells in series and parallel connections. A battery pack has to consider various factors to assess battery health. Battery health involves conventional factors and additional factors, such as cell-to-cell imbalance. For large applications, state-of-health (SOH) can be inaccurate because of the lack of factors that indicate the state of the battery pack. In this study, six characterization factors are proposed for improving the SOH estimation of battery packs. The six proposed characterization factors can be regarded as health indicators (HIs). The six HIs are applied to the principal component analysis (PCA) algorithm. To reflect information regarding capacity, voltage, and temperature, the PCA algorithm extracts new degradation factors by using the six HIs. The new degradation factors are applied to a multiple regression model. Results show the advancement and improvement of SOH estimation.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.260-264
• /
• 2016

MAX77846은 MAX77826과 호환해서 최신 웨어러블 시계와 3G/4G 스마트폰용의 전력모듈(PMIC)로 사용된다. MAX77846은 주변장치의 전력을 공급하기 위해 N 채널 MOSFET와 고효율의 레귤레이터, 비교기 등으로 구성되어 있다. 또한, 완전한 적용성과 각각의 레귤레이터 출력전압을 제공하기 위해 $I^2C$ 연산을 위해 전력 on/off 제어 로직을 제공한다. 이 논문에서 MAX77846을 기반으로 한 축약된 전력 매크로 모델을 전류와 시간에 대한 배터리 전압의 상태를 검증하기 위해 설계하고 LTspice로 시뮬레이션을 수행한다. Samsung Galaxy Gear 2 용 충전된 배터리 용량이 실시간으로 주요기능을 수행하는데 흐르는 전류를 측정한 후 특정한 기능을 수행하는데 사용가능한 시간을 검증하여 차세대 전력 모듈의 설계변수로 활용하는데 있다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.433-436
• /
• 2013

Carbon-coated $Li_3V_2(PO_4)_3-LiMnPO_4$ composite cathode materials are first reported in this work, prepared by the mechanochemical process with a complex metal oxide as the precursor and sucrose as the carbon source. X-ray diffraction pattern of the composite material indicates that both olivine $LiMnPO_4$ and monoclinic $Li_3V_2(PO_4)_3$ co-exist. We further investigated the electrochemical properties of our $Li_3V_2(PO_4)_3-LiMnPO_4$ composite cathode materials using galvanostatic charging/discharging tests, where our $Li_3V_2(PO_4)_3-LiMnPO_4$ composite electrode materials exhibit the charge/discharge efficiency of 91.9%, while $Li_3V_2(PO_4)_3$ and $LiMnPO_4$ exhibit the efficiency of 87.7 and 86.7% in the first cycle. The composites display unique electrochemical performances in terms of overvoltage and cycle stability, displaying a reduced gap of 141.6 mV between charge and discharge voltage and 95.0% capacity efficiency after $15^{th}$ cycles.

• 청정기술
• /
• 제14권3호
• /
• pp.218-223
• /
• 2008

마이크로 에멀젼 수용액에 분산된 반응성 유기화합물을 전기분해를 통하여 얻을 수 있는 수산화이온 및 수소이온을 이용하여 가수분해시키고, 분해속도를 비교하는 실험을 수행하였다. 반응물질로 사용된 p-nitrophenylacetate (PNPA)의 가수분해로부터 발생하는 p-nitrophenoxide 농도 변화에 따른 흡광도 변화를 이용하여 분해속도를 얻을 수 있었다. 자체 조립한 전기분해 장치를 이용하여 전압, 반응온도, 반응물질 양에 따른 분해속도 변화를 관찰하였다. 마이크로 에멀젼 사용으로 인하여 반응물질 용해도를 증가시킬 수 있으며, 전기분해법 사용으로 인하여 반응속도 조절이 용이하며, 유지비용이 저렴하고, 기존 화학물질 투여방법에 비해 소모되는 시약 보충 및 반응 후 부산물 처리 등의 과정이 수월하다. 유기물질 분해에 대한 메커니즘 및 수처리 분야 응용에 대하여 토의하였다.