• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1652-1654
• /
• 1994

The Extra-high voltage XLPE cable is characterized by low transmission loss, large capacity, and high reliability. Conventionally, for XLPE cables of l54kV and above, aluminium sheath was used to be moisture barrier (thus preventing water tree deterioration of the insulation) and to protect cable core from physical stresses. However, as transmission capacity of the cable increases, so does the cable diameter and the corresponding aluminium sheath outer diameter and thickness. As a result, eddy-current loss in the sheath is increased, limiting the maximum current capacity of the cable itself. As an alternative to aluminium sheath, we have adopted stainless steel sheath with non-magnetic properties and a large resistivity, The new XLPE cable with stainless-steel sheath (CSZV cable) has drastically reduced eddy-current loss in the sheath.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1384-1389
• /
• 2004

The primary objective of this paper is to examine the capacity of electrical transmission in electric railway feeding system. Although supply capacity of railway substation are sufficient and there is no accident, due to the electrical transmission limit of feeding line the voltage breakdown may occur when large capacity of electric load at feeding line exist. So, using multi-port analysis model, we draw P-V curve due to the length of feeding line, load, location and power factor of electric locomotive. And through case study, compare measurement result and simulation result

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.612-615
• /
• 2004

A high-voltage generator is used to program the anti-fuse of the semiconductor chip. A new high-voltage generator consists of PN diodes and new stack type capacitors. An oscillator supply pulses to the high-voltage generator. The pulse period of the oscillator is delayed by controlling gate-voltage of the MOS. The pulse period is about 27ns, therefore the pulse frequency is about 37MHz. The threshold voltage of PN diode is about 0.8V. The capacitance of new stack type capacitor is about 4pF. The output voltage of the new high-voltage generator is about 7.9V and its current capacity is about $488{\mu}$A.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.258-264
• /
• 2006

This paper presents an integrative control scheme for series-type active power filters combined with shunt passive filters not only to compensate for the source voltage unbalance and current harmonics but also to correct the power factor. To reduce the power capacity of the active filters, passive filters are connected in parallel. Diode rectifiers are replaced by the PWM converters in order to feed the real power back to the source. Power factor control is performed by changing the phase of the load voltage so that the phase of the source current coincides with that of the source voltage. The resultant voltage reference is the addition of the voltage component compensating for the source voltage unbalance and harmonic currents and the voltage component correcting the power factor. The validity of the proposed algorithm has been verified by experimental results.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1099-1107
• /
• 2019

A soft switching converter with wide voltage range operation is investigated in this paper. A series resonant converter is implemented to achieve a high circuit efficiency with soft switching characteristics on power switches and rectifier diodes. To improve the weakness of the narrow voltage range in LLC converters, an alternating current (ac) power switch is used on the primary side to select a half-bridge or full-bridge resonant circuit to implement 4:1 voltage range operation. On the secondary-side, another ac power switch is adopted to select a full-wave rectifier or voltage-doubler rectifier to achiever an additional 2:1 output voltage range. Therefore, the proposed resonant converter has the capacity for 8:1 (320V~40V) wide output voltage operation. A single-stage hybrid resonant converter is employed in the study circuit instead of a two-stage dc converter to achiever wide voltage range operation. As a result, the study converter has better converter efficiency. The theoretical analysis and circuit characteristics are verified by experiments with a prototype circuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.55-59
• /
• 1998

By this time, Diode Rectifier or SCR has been used to gain DC Voltage for Electrolysis Power. Generally DC Voltage is produced from rectifier shall be transformed before rectifier using step-down transformer to obtain adaptable DC Voltage, rectifier output. In the same way, rectifier using SCR shall obtain output voltage after step-down voltage through transformer and control of the SCR firing angle. Transformer shall be used for this two methods to adjust the voltage. But the size and weight of the transformer are increased in accordance with the increase of capacity, and the hardships are accompanied in workspace or transportation. Besides, only the value of input voltage is possible to be regulated, and the expectation of current control is almost impossible during Electrolysis. This study has conducted Design and Simulation to reduce the size and weight of transformer and to be enable voltage and current control of Electrolysis power through high-speed switching using Inverter, Electronics device.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.402-404
• /
• 2000

In this study, we have developed an ultrasonic separation system for plant cells and its operating conditions in terms of voltage, flow rate and concentration were examined. For plant cell, the operation of ultrasonic separator highly depended on concentration of cells. Holding capacity highly depended on flow rate in chamber. Optimum voltage was 30V in high density culture

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.657-667
• /
• 2023

배전계통에 연계되는 분산전원의 수가 증가함에 따라 계통 내 과전압 문제를 일으키지 않고 접속될 수 있는 한계접속용량인 photovoltaic(PV) hosting capacity(HC)를 추정하는 것이 매우 중요해졌다. 이에 본 연구에서는 접속점의 전압을 유지하는 제어를 수행하면서 향상된 hosting capacity를 추정하기 위한 방안을 제안하고 있다. 제안된 방안은 two-stage optimization framework로 구성되며 Stage 1에서 IEEE Std 1547-2018 가이드라인을 이용한 Volt-Var(VV) 및 Volt-Watt(VW) 제어 PV hosting capacity 추정을 수행한다. Stage 2에서는 VV 및 VW의 파라미터를 개선하는 절차를 거쳐 향상된 PV HC 값을 다시 도출해낸다. 제안한 방식의 성능 검증을 위해 IEEE 37-버스 시스템이 OpenDSS를 사용해 테스트되었으며 결과에서 제안된 방식의 적용을 통해 PV hosting capacity가 증가함을 확인하였다.

• Journal of Platform Technology
• /
• 제11권2호
• /
• pp.54-65
• /
• 2023

전기자동차에 사용되는 배터리는 전기자동차의 특성상 정격용량이 매우 커다란 배터리이다. 전기자동차를 장기간 운행하거나 교통사고로 전기자동차가 폐차되게 되면 전기자동차용 배터리는 폐배터리가 된다. 폐차되는 차량이더라도 전기자동차용 폐배터리에 남아 있는 용량은 다른 용도로 사용하기에 충분하다. 자동차용 폐배터리는 매우 고가이기때문에 재활용 및 재사용이 필요하지만 재활용 및 재사용을 위한 폐배터리 성능등급 측정기준이 부족한 문제가 있었다. 폐배터리의 잔존용량을 측정하는 방법으로 가장 안정적이고 신뢰할 수 있는 방법은 완전 충·방전을 이용하여 배터리의 잔존용량을 측정하는 것이다. 하지만 이러한 완전 충·방전에 방식에 의한 검사 방법은 배터리의 용량에 따라 다르지만 검사하는데 하루 이상이 걸리는 단점을 가지고 있으며 많은 사람들이 이러한 문제를 해결하기 위하여 많은 노력을 하고 있다. 본 논문에서는 전기자동차 배터리에 대한 검사 시간을 줄일 수 있는 방법으로 셀간 전압 편차를 활용한 전기자동차 배터리 잔존용량 분석 기법을 연구 분석하였다. 이를 위하여 완전 충·방전 기반의 용량 측정시스템을 구성하고 코나 폐배터리를 이용하여 실험데이터를 수집하였고 배터리 팩을 구성하고 있는 배터리 셀간 전압 편차와 잔존용량과의 상관관계를 분석하여 배터리 검사에 활용할 수 있는지를 검증하였다.

• 전기학회논문지P
• /
• 제58권1호
• /
• pp.79-84
• /
• 2009

In order to increase the capacity of the superconducting fault current limiter(SFCL), the current and voltage grades of the SFCL must be increased. As a method for the increase of the current and voltage grades of the SFCL, we compared the various characteristics between the flux-lock type SFCL "With three superconducting units connected in series and the transformer type SFCL using the transformer with three secondary circuits. One of three superconducting units had not quenched in the flux-lock type SFCL. Therefore, the unbalanced power burden happened because of the voltage difference generated by unbalanced quenching between the superconducting units. In the meantime, the three superconducting units were all quenched in the transformer type SFCL using the transformer, and the voltage difference generated between the superconducting units was decreased. Therefore, the difference of critical characteristics was complemented by distribution of fault current in accordance with the turn's ratio between primary and secondary windings. The unbalanced power burden of the superconducting units was reduced due to flux-share between the superconducting units in the transformer. In conclusion, the capacity increment of the SFCL using a transformer was easier due to equal distribution of voltages generated by simultaneous quench of the superconducting units. We think that the characteristics is improved more because of the decrease of saturation in the iron core if the secondary winding is increased in the SFCL using the transformer.