• Advances in nano research
• /
• 제4권4호
• /
• pp.309-326
• /
• 2016

The buckling response of a single-layered graphene sheet (SLGS) embedded in visco-Pasternak's medium is presented. The nonlocal first-order shear deformation elasticity theory is used for this purpose. The visco-Pasternak's medium is considered by adding the damping effect to the usual foundation model which characterized by the linear Winkler's modulus and Pasternak's (shear) foundation modulus. The SLGS be subjected to distributive compressive in-plane edge forces per unit length. The governing equilibrium equations are obtained and solved for getting the critical buckling loads of simply-supported SLGSs. The effects of many parameters like nonlocal parameter, aspect ratio, Winkler-Pasternak's foundation, damping coefficient, and mode numbers on the buckling analysis of the SLGSs are investigated in detail. The present results are compared with the corresponding available in the literature. Additional results are tabulated and plotted for sensing the effect of all used parameters and to investigate the visco-Pasternak's parameters for future comparisons.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.159-166
• /
• 1997

The purpose of this thesis is to derive a theoretical model of the hysteretic resistance of the visco-elastic damper based on test results of harmonic excitation and to investigate of the basis of theory and experiment the effect of vibration control and response characteristics of portal frames degree vibration systems provided with the damper. The behaviour of a visco-elastic degree under dynamic loading is idealized by a model of the theory of visco-elasticity, i.e. a four-parameter model formed as a parallel combination of Maxwell fluid and Kelvin-Voigh models and its constitutive equation is derived. The model parameters are determined for a tested damper from the datas of harmonic excitation tests. The theoretical model of the damper is incorporated in equation fo motion of single degree of freedom. A computer program for solving the equation is written using Runge-kuttas's numerical integration scheme. Using this analysis program test cases of the earthquake excitation are simulated and the results of the simulation are the results of the simulation are the results of the simulation are compared with the test results.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.300-305
• /
• 2004

High-solid coatings were prepared by blending of previosly synthesized acrylic resins and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The impact resistance, cross-hatch adhesion, $60^{\circ}$specular gloss, and heat resistance of the films proved to be good, and the pencil hardness and drying time proved to be slightly poor. Especially, there was a remarkable improvement in the heat resistance. This improvement may stem from the regular arrangement of ethyl groups introduced into the acrylic resin. As a result of Rigid-body pendulum visco-elasticity measurement, dynamic $T_g$ values of cured films increased with dynamic $T_g$ values.

• 대한치과보철학회지
• /
• 제41권1호
• /
• pp.35-47
• /
• 2003

The dimensional stability of tissue conditioners characterizes the ability of the materials to yield accurate functional impressions of oral mucosa. This study evaluated the viscoelastic property and the linear dimensional changes with the factor of time and thickness of tissue conditioners ($COE-COMFORT^{TM}$, Visco-gel. $COE-SOFT^{TM}$, Soft-Liner). The thickness of these materials were changed (1.5mm, 3.0mm) and the percentage changes in dimension were measured at 1h, 12h, 24h, 36h, 3day, 7day after specimen preparation. From the results large differences appear between the various tissue conditioners. The results suggest that the period recommended for forming functional impression would be 2-3days after insertion in the mouth. in addition. it is important to select tissue conditioners suitable for functional impression because of the wide range of dimensional stability among the materials.

• Geomechanics and Engineering
• /
• 제33권3호
• /
• pp.271-277
• /
• 2023

This article investigates the effect of viscoelastic foundations on the waves' dispersion in a beam made of ceramic-metal functionally graded material (FGM) with microstructural defects. The beam is considered to be shear deformable, and a simple three-unknown sinusoidal integral higher-order shear deformation beam theory is applied to represent the beam's displacement field. Novel to this study is the investigation of the impact of viscosity damping on imperfect FG beams, utilizing a few-unknowns theory. The stresses and strains are obtained using the two-dimensional elasticity relations of FGM, neglecting the normal strain in the beam's depth direction. The variational operation is employed to define the dispersion relations of the FGM beam. The influences of the material gradation exponent, the beam's thickness, the porosity, and visco-Pasternak foundation parameters are represented. Results showed that phase velocity was inversely proportional to the damping and porosity of the beams. Additionally, the foundation viscous damping had a stronger influence on wave velocity when porosity volume fractions were low.

• 대한토목학회논문집
• /
• 제35권4호
• /
• pp.769-777
• /
• 2015

본 연구에서는 속도 의존성을 나타내는 콘크리트의 인장거동을 모사하기 위하여 유변학적(rheological) 모델을 개발하였고 이를 평가하였다. 일반적으로 외부에서 가해지는 하중 속도가 증가할수록 콘크리트의 물성(강도, 탄성계수, 파괴에너지 등)은 그 크기가 증가한다. 콘크리트의 강도는 다른 물성에 비하여 큰 속도의존성을 나타내고, 압축 하중인 경우보다 인장 하중을 받는 경우 그 속도의존성이 크게 나타난다. 이러한 콘크리트의 속도 의존성을 모사하기 위하여, 기존 RBSN(Rigid-Body-Spring-Network) 모델의 거동을 나타내는 스프링 세트에 대쉬포트(Dashpot)와 같은 점성 요소와 Coulomb 마찰 요소를 조합하였다. 요소의 조합에 따라 세 가지 모델( 1)점탄성, 2)점소성, 3)점탄소성 손상(Damage 모델)을 고려하였고, 이에 대한 구성관계식을 유도하였다. 개발된 해석모델은 직접인장 실험의 응력-변형률 관계곡선과 비교 검증되었고, 이중 점탄소성 손상 모델은 실험결과를 잘 모사할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제34권5호
• /
• pp.643-655
• /
• 2020

In the present work, the buckling behavior of a single-layered graphene sheet (SLGS) embedded in visco-Pasternak's medium is studied using nonlocal four-unknown integral model. This model has a displacement field with integral terms which includes the effect of transverse shear deformation without using shear correction factors. The visco-Pasternak's medium is introduced by considering the damping effect to the classical foundation model which modeled by the linear Winkler's coefficient and Pasternak's (shear) foundation coefficient. The SLGS under consideration is subjected to compressive in- plane edge loads per unit length. The influences of many parameters such as nonlocal parameter, geometric ratio, the visco-Pasternak's coefficients, damping parameter, and mode numbers on the buckling response of the SLGSs are studied and discussed.

• 한국한의학연구원논문집
• /
• 제18권3호
• /
• pp.119-126
• /
• 2012

1. Objectives Sasang constitutional medicine is unique in Korean traditional medicine. It diagnoses and treats patients based on his/her Sasang constitution (SC). Skin properties have been used as an effective diagnostic component in the classification of SC types in clinics. In this paper, we investigated the SC-based health relevance of skin elasticity and wrinkle properties. 2. Methods The skin elasticity and wrinkle of forearm and dorsal hand were measured in 299 elderly female subjects. To determine the subject's Sasang constitution, we adopted the classification results from a newly developed SC diagnostic tool. The health states of the subjects were scored by two Korean traditional medical doctors, by whom each subject was categorized either into the healthy state or the unhealthy state. 3. Results As a result, the elasticity hysteresis of forearm (E_HYS), the visco-elasticity (VE_MEAN), and the wrinkle frequency energy of backhand (W_HAND) showed significant differences between Taeum-in group and Soeum-in group. In case of the Soeum-in on unhealthy state, VE_MEAN was decreased significantly (p<.05). W_HAND and W_ARM_H of the healthy Taeum-in were less than those of the unhealthy Taem-in. 4. Conclusions In this study we showed that, for an elderly female population, skin elasticity and viscosity were significantly different not only between each SC type but also between healthy group and unhealthy group in each constitution. In particular, Soeum-in subjects were inferred to be superior in retaining skin softness when they were healthy, and Taeum-in subjects were easy to lose their firmness of skin surface when they became unhealthy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.751-754
• /
• 2000

Stress relaxation experiments were performed to obtain the material properties to be used in the linear viscoelastic study. Master curve of the modulus of polystyrene were obtained by using the time-temperature superposition principle. Because Shyu and Tobolsky's tensile relaxation modulus master curve or Polystyrene material showed very large difference, in-house data were required to calculate the residual stresses in injection-molded products more accurately. Our own experimental data showed that the master curve Shyu's data should be shifted about two orders in material time coordinate.

• Advances in nano research
• /
• 제8권1호
• /
• pp.49-58
• /
• 2020

This paper investigates the vibration characteristics of flexoelectric nanobeams resting on viscoelastic foundation and subjected to magneto-electro-viscoelastic-hygro-thermal (MEVHT) loading. In this regard, the Nonlocal strain gradient elasticity theory (NSGET) is employed. The proposed formulation accommodates the nonlocal stress and strain gradient parameter along with the flexoelectric coefficient to accurately predict the frequencies. Further, with the aid of Hamilton's principle the governing differential equations are derived which are then solved through Galerkin-based approach. The variation of the natural frequency of MEVHT nanobeams under the influence of various parameters such as the nonlocal strain gradient parameter, different field loads, power-law exponent and slenderness ratio are also investigated.