• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.130-143
• /
• 2015

By studying 3-D virtual human modeling, motion-capturing and clothing simulation for easier and safer work clothes development, this research aimed (1) to categorize heavy manufacturing work motions; (2) to generate a 3-D virtual male model and establish painting work motions within a 3-D virtual clothing simulation system through computerized body scanning and motion-capturing; and finally (3) to suggest simulated clothing images of painting work clothes developed based on virtual male avatar body measurements by implementing the work motions defined in the 3-D virtual clothing simulation system. For this, a male subject's body was 3-D scanned and also directly measured. The procedures to edit a 3-D virtual model required the total body shape to be 3-D scanned into a digital format, which was revised using 3-D Studio MAX and Maya rendering tools. In addition, heavy industry workers' work motions were observed and recorded by video camera at manufacturing sites and analyzed to categorize the painting work motions. This analysis resulted in 4 categories of motions: standing, bending, kneeling and walking. Besides, each work motion category was divided into more detailed motions according to sub-work posture factors: arm angle, arm direction, elbow bending angle, waist bending angle, waist bending direction and knee bending angle. Finally, the implementation of the painting work motions within the 3-D clothing simulation system presented the virtual painting work clothes images simulated in a dynamic mode.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.107-113
• /
• 2020

PURPOSE. The aim of this study was to examine the importance of the defect-free scanning of a scan body by assessing the accuracy of virtual implant positioning in computer-aided design (CAD) software when the scan body image is improperly scanned. MATERIALS AND METHODS. A scan body was digitized in a dentiform model using an intraoral scanner, and scanned images with differing levels of image deficiency were generated: 5%, 10%, and 15% deficiency in the flat or rounded area. Using a best-fit image matching algorithm on each of the deficient scan body images, corresponding virtual implants were created. The accuracy of the implant position was evaluated by comparing the linear and angular discrepancies between the actual and virtual positions of the implant. Kruskal-Wallis tests and Mann-Whitney U tests with Bonferroni correction were used to determine the statistical differences among the seven scanned image deficiency groups (α=.05). RESULTS. In general, the linear and angular discrepancies of the implant position in the software increased as the deficiency of the scan body images increased. A 15% scan body image deficiency generated larger discrepancies than deficiency of 5% and 10%. The difference of scan defect position, flat or rounded area, did not affect the accuracy of virtual implant orientation at 5% and 10% deficiency level, but did affect the accuracy at 15% deficiency level. CONCLUSION. Deficiencies in the scanned images of a scan body can decrease the accuracy of the implant positioning in CAD software when the defect is large, thus leading to the incorrect fabrication of implant prostheses.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.23-30
• /
• 2007

This paper presents a method of generating 3-dimensional images by preprocessing 2-dimensional abdominal images obtained using CT (computed tomography) and MRI (magnetic resonance imaging) through segmentation, threshold technique, etc. and apply the method to virtual endoscopy. Three-dimensional images were visualized using indirect volume rendering, which can render at high speed using a general-purpose graphic accelerator used in personal computers. The algorithm used in the rendering is Marching Cubes, which has only a small volume of calculation. In addition, we suggested a method of producing 3-dimensional images in VRML (virtual reality modeling language) running on the Web browser without a workstation or an exclusive program. The number of nodes, the number of triangles and the size of a 3-dimensional image file from CT were 85,367, 174,150 and 10,124, respectively, and those from MRI were 34,029, 67,824 and 3,804, respectively.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.131-139
• /
• 2010

Virtual reality(VR) technology allows users to experience the same sensation as if they look and feel real objects, and furthermore it enables users to experience phenomena in virtual environment which are difficult to illustrate in real world. A multichannel display is one of the virtual reality systems for generating high-quality images and guaranteeing a wide view angle using multiple projectors. In this work, we present the multichannel display system whose resolution is $4096{\times}1536$. We implement an automatic calibration (geometric and color) method for compensating the distorted image and color. The results clearly show the proposed system provides continuous and smooth images.

• Electronics and Telecommunications Trends
• /
• v.39 no.3
• /
• pp.107-115
• /
• 2024

Image synthesis has been remarkably developed in the computer vision domain and various researches have been proposed to generate realistic and high-resolution images. In particular, image-based virtual try-on is an application in fashion domain to simulate wearing clothes. Specifically, using input images of a fashion model and products, an realistic image of the model wearing the provided garments is synthesized. In this paper, we present a comprehensive review of technical trends in image-based virtual try-on technology. We first introduce relevant datasets and discuss their characteristics. Then, we categorize existing image synthesis methods into three main streams: warping-based methods, encoding-decoding-based methods, and diffusion-based methods. Finally, we explore other important research issues in the field of virtual try-on and analyze related researches aimed to tackling those challenges.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2521-2526
• /
• 2015

Objective: The purpose of this study was to evaluate computed tomography (CT) virtual non-contrast (VNC) spectral imaging for gastric carcinoma. Materials and Methods: Fifty-two patients with histologically proven gastric carcinomas underwent gemstone spectral imaging (GSI) including non-contrast and contrast-enhanced hepatic arterial, portal venous, and equilibrium phase acquisitions prior to surgery. VNC arterial phase (VNCa), VNC venous phase (VNCv), and VNC equilibrium phase (VNCe) images were obtained by subtracting iodine from iodine/water images. Images were analyzed with respect to image quality, gastric carcinoma-intragastric water contrast-to-noise ratio (CNR), gastric carcinoma-perigastric fat CNR, serosal invasion, and enlarged lymph nodes around the lesions. Results: Carcinoma-water CNR values were significantly higher in VNCa, VNCv, and VNCe images than in normal CT images (2.72, 2.60, 2.61, respectively, vs 2.35, $p{\leq}0.008$). Carcinoma-perigastric fat CNR values were significantly lower in VNCa, VNCv, and VNCe images than in normal CT images (7.63, 7.49, 7.32, respectively, vs 8.48, p< 0.001). There were no significant differences of carcinoma-water CNR and carcinoma-perigastric fat CNR among VNCa, VNCv, and VNCe images. There was no difference in the determination of invasion or enlarged lymph nodes between normal CT and VNCa images. Conclusions: VNC arterial phase images may be a surrogate for conventional non-contrast CT images in gastric carcinoma evaluation.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.128-136
• /
• 2014

The virtual try-on technologies of the current level have limitations with material expression as well as some difficulties with commercialization. There are differences in simulation results and subjective evaluations perceived by consumers according to the types and physical characteristics of materials used in virtual try-on simulations. This study were to analyze the exterior clothing shapes and visual images from 3D virtual try-on simulations with materials whose drapability was differentiated and then test the accuracy of the expression of the drapability of the materials. The study carried out 3D virtual try-on simulations by selecting flared skirts as an item to best express differences in drapability along with five materials of different physical properties and offered some basic data for greater utilization of virtual try-on simulations by comparing and analyzing them with the exterior shapes and visual images of actual flared skirts. The analysis results of hemline shapes between actual and virtual try-on according to the types of materials showed no match among the quantitative items of exterior shapes factors. There were no significant differences in the visual images except for "soft" according to the simulation methods, which means that the items can serve as part of a scale for visual image comparison. It is necessary to reflect quantitative numbers regarding "drapability" proposed in the study simulation software and to continue to build a systematic database for virtual simulations by investigating and testing various materials.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.708-712
• /
• 2005

We propose a computational reconstruction technique in large-depth integral imaging where the elemental images have information of three-dimensional objects through real and virtual image fields. In the proposed technique, we reconstruct full volume information from the elemental images through both real and virtual image fields. Here, we use uniform mappings of elemental images with the size of the lenslet regardless of the distance between the lenslet array and reconstruction image plane. To show the feasibility of the proposed reconstruction technique, we perform preliminary experiments and present experimental results.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1468-1471
• /
• 2012

It is always a dream to recreate the experience of a particular place, the Panorama Virtual Reality has been interpreted as a kind of technology to create virtual environments and the ability to maneuver angle for and select the path of view in a dynamic scene. In this paper we examined an efficient algorithm for Image registration and stitching of captured imaged from a video stream. Two approaches are studied in this paper. First, dynamic programming is used to spot the ideal key points, match these points to merge adjacent images together, later image blending is use for smooth color transitions. In second approach, FAST and SURF detection are used to find distinct features in the images and a nearest neighbor algorithm is used to match corresponding features, estimate homography with matched key points using RANSAC. The paper also covers the automatically choosing (recognizing, comparing) images to stitching method.

• Journal of Fashion Business
• /
• v.26 no.1
• /
• pp.53-67
• /
• 2022

The purpose of this study was to compare the appearance similarity between a 3D virtual wedding dress, and a model wearing real dress, and production efficiency, and the possibility of achieving similar results with 3D digital technology. Five wedding dresses for small weddings under the theme of 'Dream Series', were designed and produced in virtual and real dresses to quantitatively compare and analyze the appearance similarity and production efficiency. Experts compared the appearance similarity on the silhouettes, colors, materials, and details, and production efficiency was compared with time and cost. Based on our results, 3D virtual images of four out of the five dresses were similar to the real images. Our efficiency evaluation results showed that the manufacturing time was 45.4% shorter, and the manufacturing cost was 46.1% less than the existing method. This indicated that the wedding dress manufacturing process using 3D virtual software was time and cost saving competitive. Our results also confirmed that 3D virtual software technology has the potential to increase the efficiency of designing and production, and therefore an increase in competitiveness and sales of wedding dresses. Furthermore, 3D technology allows consumers to select and order wedding dresses online through 3D virtual software. This is a great advantage, and it highlights the significance of this research study.